Add my company Get multiple quotes Log in
  • europages
  • >
  • COMPANIES - SUPPLIERS - SERVICE PROVIDERS
  • >
  • length measuring systems

Results for

Manufacturer Producer - Length measuring systems

Manufacturer/producer
27 Companies 27 Products

  1. MAGNESCALE EUROPE GMBH

    Germany

    Verified by europages badge

    Magnescale Co., Ltd. is a globally leading manufacturer of high-precision length measuring systems, angle measuring systems and measuring sensors based in Japan. Magnescale was founded as Sony Magnescale in 1969 and has been part of the DMGMORI Group since 2010. MAGNESCALE™, DIGIRULER™, SmartSCALE™ and DIGITAL GAUGE™ are measuring systems with a magnetic operating principle. As a result, they are extremely insensitive to contamination, while providing a high level of precision and reliability. These length and angle measuring systems are therefore typically used for speed and position control in machine tools. Thanks to their robustness, our measuring sensors are mainly used for quality control in assembly and production plants for series production, e.g. in the automotive industry. LASERSCALE™ measuring systems work according to an interferometric laser operating principle, which generates a very high signal quality. This helps to achieve very high resolutions in the single-digit picometer range. These measuring systems are primarily used in semiconductor production and in measuring machines. Outside of Japan, Magnescale Co., Ltd. has sales companies in Germany (Wernau, near Stuttgart) and in the USA (Irvine, California) and is also supported globally by a large network of distributors and retailers.

    Website Open In New icon See all products

  2. ZGPU GROUP LTD

    Bulgaria

    PRODUCTS: • Encoders - incremental and absolute, devices for automation of manufacturing lines and processes and CNC machines; • Hall sensors, inclination measurement sensors, pressure sensors, magnetic transducers for angular travels, used as measurement devices; • Timers, programmable counters, one- and two-coordinate control systems; • Length measurement systems; • Induction heating installations; • Professional plotters in three versions: drawing, cutting and engraving; • Vibration discharge hoppers and feeders, as well as vibrating line conveyors; • Range of precise flexible membrane and bellows couplings; • Range of power jaw and bellows couplings; • Machining of precise components and assembly units.

  3. PROMESS GESELLSCHAFT FÜR PRODUKTIONSTECHNISCHES MESSEN MBH

    Germany

    Verified by europages badge

    Precision and quality are our strength. For more than 40 years, we have developed high-quality hardware and software for measuring, monitoring and controlling workpieces with tight tolerances. As such, we have become a leading solution provider for complex measurement applications. Our goal is to prevent unnecessary manufacturing costs and minimise reject rates. Thanks to our successful collaboration with our expert partners, we offer a products ranging from ergonomically designed hand-held measuring devices through to fully automatic measuring stations. We focus closely on your measuring requirements and work to offer you a complete solution for them. We support our customers from planning through to delivery – and will of course provide continuous support even after implementation of our systems. We are constantly working to develop new and tailor-made complete solutions. This provides us with the flexibility to always achieve efficient results. Our PROMESS software is based on many years of experience and is under continuous further development thanks to customer feedback. Our SPC software is suitable for any measuring task. It includes a range of control and regulation technology for individual planning of data recording to help you with process control and process monitoring. The quality of our systems is guaranteed with certification in accordance with DIN EN ISO 9001 and regular recertification. Our creativity and long-lasting ties with our cus

    Website Open In New icon

  4. PRESSTA EISELE GMBH

    Germany

    Verified by europages badge

    Pressta Eisele GmbH from Bullay produces circular saws, automatic saws and custom solutions for cross-cutting, drilling, milling and die cutting structural shapes from aluminium and non-ferrous heavy metals. We offer five different model ranges, from automatic saws and thin cutting machines with saw blade widths from 1 mm to high-performance machines with 18.5 kW saw drive. Saw lines are developed on customer demand and can also be integrated into fully automatic processing systems. Semi-automatic circular saws with saw blades of up to 800 mm diameter and up to 13 kW saw drive are also included in the scope of delivery. Further information is available at www.pressta-eisele.de

    Website Open In New icon See all products

  5. KÜBLER GROUP - FRITZ KÜBLER GMBH

    Germany

    Verified by europages badge

    Today the Kübler Group is one of the world's leading specialists in position and motion sensor technology, functional safety technology, counting and process technology as well as transmission technology. Founded in 1960 by Fritz Kübler, the family business by Gebhard and Lothar Kübler in the second generation. Nine international group members and representatives in more than 50 countries offer product expertise, service and advice on-site worldwide. Innovative product and industry solutions as well as solutions for functional safety technology and a high level of service are the reasons for our worldwide success. The strict quality orientation ensures the highest reliability and durability of our products in the field. Over 400 committed employees all over the world make this success possible. They ensure customer confidence in our company.

    Website Open In New icon
Office Building Outline icon
A page for your business
Can you see this? Your potential clients will too. Join us now so you too can be visible on europages
Add my business

  1. RUMUL RUSSENBERGER PRÜFMASCHINEN AG

    Switzerland

    Verified by europages badge

    RUSSENBERGER PRÜFMASCHINEN AG (better known as RUMUL) develops, builds and sells machines for the dynamic testing of specimens and components with electromagnetic resonant systems. 15 members of staff ensure seamless order processing and provide servicing of the machines on site worldwide. We are supported by external partners, as required, in production, software and electronics development and computing. The current market situation shows that there is a realisation within testing technology too that dynamic fatigue and crack propagation tests should be carried out by environmentally-friendly and energy-efficient systems. The widespread use of fast electromagnetic resonance testing machines proves this trend. RUMUL's products are the result of 50 years of experience and a great many customer requests. With the motto "Advancement through specialisation", we want to be the best partner that we can for our customers

    Website Open In New icon See all products

  2. GEBR. UNGLAUB & CO GMBH

    Germany

    Verified by europages badge

    Our production range includes: Technical pressed parts and stamped parts made from aluminium, ALMgSi alloys and electrolytic copper. The following dimensions can be delivered: Panels from 0.15 mm/Lengths up to 320 mm/Circular up to a diameter of 120 mm/Square up to 120 mm x 120 mm/Rectangular up to 200 mm x 80 mm. Our machinery includes: Toggle lever presses with a pressing force of up to 1000 t, eccentric presses with a pressing force of up to 80 t, cutting machines, beading machines, degreasing systems. Automatic machines and CNC turned parts in accordance with DIN or factory standards from almost all metal materials. We produce components up to 350 mm in length and up to 200 mm in diameter in chuck machining and bar machining. Our machinery includes: Automatic curve lathes, CNC lathes, milling machines. We will provide you with paint cups, pressurised vessels for paint spray guns with screw-type, buckle or bayonet catch fasteners, with internal and external threads, as well as viscosity measuring cups. Our machinery includes: Automatic metal printing machines, automatic turret lathes, eccentric presses. In-house toolmaking and fixture construction.

    Website Open In New icon

  3. EDMUND OPTICS GMBH

    Germany

    Edmund Optics® (EO) is a leading manufacturer and distributor of precision optics, optical assemblies and image processing components. It is headquartered in the USA, has production sites in the USA, Europe and Asia, and has a global sales network. With a range of >34, 000 products, EO has a large stock for immediate delivery, and offers products – whether standard or customer-specific, whether in small quantities or large volumes – for various branches like life sciences, industrial measuring and testing technology and research & development. EO offers a wide selection of glass lenses, filters and mirrors, as well as windows, prisms, beamsplitters and diffraction gratings. Whether a standard component, high-precision optics, a build-to-print lens or a completely redesigned assembly, EO's optics experts and engineers help to develop solutions. EO offers a huge variety of products and lenses for image processing, such as M12 image processing lenses with a liquid lens, lenses with a fixed focal length and robust "ruggedised" lenses for harsh environments. EO enables complete imaging solutions and helps to maximise the performance of imaging systems with state-of-the-art production capacities and technical support. EO develops and manufactures laser optics components using high-end manufacturing and coating systems: Laser mirrors, laser aspheres, laser beam expanders, ideal for material processing, medical technology or entertainment projectors.

    See all products

  4. BOLZENSCHWEISSTECHNIK BSK + BTV GMBH

    Germany

    Passionate about stud welding: Bolzenschweißtechnik bsk+BTV GmbH uses modern and clever solutions. With decades of experience in constructing CNC stud welding machines and special machines, Bolzenschweißtechnik bsk+BTV GmbH is a competent and reliable partner in all areas of stud welding. The CDP-M series of condenser power units are among the most powerful devices on the market. With innovative developments in drawn arc ignition, the company has developed lightweight welding inverters to reliably tackle all welding jobs with diameters from 3 to 25 mm. The latest welding guns and automatic welding heads have electromechanical position measuring systems. The RAPIDOR QF automatic welding head with a patented stud length adjustment system offers significant benefits in terms of process and set-up costs: Different stud lengths can be fed without the need for retrofitting on a single welding head.

  5. HW KUNSTSTOFF GMBH

    Germany

    Our company was founded at the Ahaus site in western Germany in 2016. On a site which measures approx. 1500 m2, we manufacture high quality plastic components of up to 3000 mm in length using state-of-the-art machining centres driven by 3-axis and 5-axis CNC machinery. As a specialised contract manufacturer, we are able to meet virtually all of our customers' requests. The focus of our services is on milling or machining plastics up to a length of 3000 mm. Among other products, we manufacture clamping systems, profiles, guides and slide rails from abrasion-resistant plastics. We can manufacture products as individual or serial parts, according to your wishes. We primarily process polyethylene in the HMW (PE500) and UHMW (PE1000) qualities, polyamide (PA) and polyoxymethylene (POM), among many others. Precise craftsmanship, experience and expertise form the basis of our high-quality production.

  1. ATR INDUSTRIE-ELEKTRONIK GMBH & CO. KG

    Germany

    ATR Industrie-Elektronik specialises in the manufacture of switchgear and the development and production of industrial electronics. Every year, we manufacture control systems and switchgear with a total length of over 6.5 km, and are authorised for UL and cUL approvals. We develop and manufacture electronic components for metrology, control and regulation technology, used in almost every branch of industry. Our product range is constantly being updated and expanded. Our standard components, including isolating amplifiers, measuring amplifiers, level converters, controllers and analogue and digital signal processing are described, along with their technical data and block diagrams, in our online catalogue, online shop and free "MSR-Elektronik" handbook.

  2. NOKRA OPTISCHE PRÜFTECHNIK UND AUTOMATION GMBH

    Germany

    nokra GmbH is a medium-sized company operating on a global level, offering high-quality measurement and testing systems for use in manufacturing. Our systems measure and test geometric features such as length, width, thickness, structural shape, form and position. nokra develops and produces the laser sensors and automatic test systems required for these tasks in-house. This means that each system can be adjusted to match the specific requirements of our customers and optimised to suit the application it will be used for. For this reason, nokra has unique expertise in tackling issues in the steel industry, aluminium industry, automotive industry and plastics industry as well as in the areas of plant engineering and glass processing. Our years of experience, innovative, interdisciplinary teams and close cooperation with our partners ensure that our measuring systems constantly undergo further development and always use cutting-edge technology.

Product recommendations

Roller Conveyors & Measuring Systems
Roller Conveyors & Measuring Systems

Germany

Verified by Europages
Heidenhain Measurement And Control Technology
Heidenhain Measurement And Control Technology

Germany

Verified by Europages
SL110 / SL130 Digiruler
SL110 / SL130 Digiruler

Germany

Verified by Europages
Crack Length Measuring Device Fractomat
Crack Length Measuring Device Fractomat

Switzerland

Verified by Europages
See more products

  1. CHELK LLC

    Belarus

    We are a manufacturer of capacitive fuel level sensors Strela that can be used for highly precise fuel measurement. Our company is located in Minsk, Belarus from where we make the direct shipments all over the world. Our team is over 10 years in this business and has wide experience in fuel monitoring solutions. Fuel level sensors (for short FLS) “Strela” are used for diesel, petrol and oil measuring. They enjoy wide application in automotive telematic systems such as Skypatrol, Teltonika, Ruptela, BCE etc. for fuel level recording. Various interfaces provide a suitable solution for any telematic system. The advantages you gain with our fuel level sensors: - Rigid design of sensors: IP66 protection class, strong aluminum alloy casing and tubes - Variety of interfaces (analog 0-5 and 0-10 v), frequency, digital rs232 and rs485)- High precision: resolution of 4096 points on measured length - Internal averaging of fuel data - We can record calibration curve (level - volume) in sensor, so it becomes fuel volume sensor - Stable and “clear” output signal - Embedded supply voltage stabilizer - Allow cutting “at place” up to 50% without recalibration, cutting to any length with calibration - Protection of output signal from short circuit - Delivery set includes all necessary things for mounting and connecting (sensor, 6m cable, gasket, screws).

  2. HECO-SCHRAUBEN GMBH & CO. KG

    Germany

    Based in Schramberg, HECO-Schrauben GmbH & Co. KG is one of Germany’s leading manufacturers of screw and fixing systems for wood construction, concrete and metal applications as well as for heavy-duty fixings. The company currently employs 300 people and avails of a production area spanning 20, 000 m2. The total annual production volume at HECO is approx. 1.5 billion screws. The range includes screws measuring between 2.5 mm and 20 mm in diameter and 10 mm and 3000 mm in length. The branded products are developed and produced directly by HECO. The company offers national technical approvals for all product ranges in the form of national or European Technical Approval (ETA). This offer is rounded off by a large portfolio of services. HECO branded products are represented world-wide, either in the form of exclusive sales points or reliable sales partners. Core markets in Europe are Germany, Austria, Switzerland, Benelux and France. HECO collaborates with licensed partners in the USA. This medium-sized family company practices unambiguous values such as imagination, reliability and quality awareness. A high degree of involvement, innovative force and teamwork are equally anchored in the corporate philosophy pursued by HECO as are its clear commitment to its location, employees and social responsibility.

  3. EKM JENA GMBH

    Germany

    ekm Jena GbR is a company that operates in Jena's technology region. Our employees have many years' experience in the area of length and coordinate measurement technology. Our products and services are linked to the measurement technology traditions of the region of Jena. Our measuring equipment is distinguished by the latest technologies, an extremely high level of precision, variable machine lengths, optimum operator comfort and powerful software systems.

  4. BURSTER PRÄZISIONSMESSTECHNIK GMBH & CO KG

    Germany

    Verified by europages badge

    With passion for precision and quality the German brand burster precision measurement technology develops and manufactures since 60 years as one of the most important suppliers precision instruments, sensors and systems for sensor signal processing and process monitoring. burster applies highest quality standards in its production of components and systems in accordance with EN ISO 9001: 2015. burster supplies 7500 customers worldwide. burster’s innovative and experienced team provides intensive application support even before a decision to buy is made. Solving complex measurement problems and integrating measurement and test technology into production environments for production control, quality assurance and test-equipment monitoring are everyday's instrumentation tasks. burster supplies measuring technology ranging from individual sensors to system solutions, with emphasis on plant construction and engineering, automation, the automotive industry and its suppliers, electrical and electronic engineering and chemicals industry. It also has a presence in numerous other sectors and future markets such as electro-mobility, alternative energies, medical engineering and biotechnology. In addition to solutions employing standard products, burster provides custom OEM solutions. Many years of experience as manufacturer of measuring sensors and instruments guarantee optimum solutions. This has earned burster an international reputation for innovation geared to customers’ needs.

    Website Open In New icon See all products

  5. OPTRIS GMBH

    Germany

    Verified by europages badge

    Optris was founded in 2003 and has since established itself as one of the leading innovative manufacturers of non-contact temperature measurement devices. The product portfolio comprises stationary infrared thermometers and online infrared cameras as well as accompanying accessories and software for industrial applications and research & development. “German engineering” - Thanks to an extensive know-how and innovative concepts, our experienced engineers and physicists continuously inspire new product developments and outstanding solutions. „Made in Germany“ - We are developing and producing in Germany to ensure the highest standard in quality as a key component of our company policy.

    Website Open In New icon

  6. TESTEM GESELLSCHAFT FÜR MESS UND DATENTECHNIK MBH

    Germany

    Verified by europages badge

    TESTEM GmbH is a reliable supplier of measurement data recording systems and devices. Our many years of experience, comprehensive expertise and goal-oriented approach to solutions have allowed us to manufacture high-quality devices and systems for recording and transmitting measurement data as well as for determining physical parameters in the sensor segment. Thus, we provide systems for fuel quantity measurement and closing force measurement as well as powerful telemetry systems, fuel injection monitoring systems and high-quality HF amplifiers. With our extensive knowledge, we have come to focus on areas such as contactless (radio) data transmission. For example, in the area of radio data transmission, we produce diversity receivers, wideband receivers and wideband transmitters that function as data transmitters. Additionally, we offer powerful measurement recording devices such as data loggers and single-stroke engines that are used to simulate different motor operating states.

    Website Open In New icon

  7. KELLER PRESSURE

    Switzerland

    Verified by europages badge

    KELLER – A market leader in the production of isolated pressure transducers and transmitters KELLER Pressure was established in 1974 by Hannes W. Keller, the inventor of the integrated silicon measuring cell. Today, his sons Tobias and Michael Keller run the business. The company is wholly family-owned and employs 480 staff. KELLER feels a strong connection to its home of Switzerland. Its headquarters are where the value is added and where most of our employees work. As a result, all KELLER products bear the quality seal 'Made in Switzerland' and embody the Swiss values of quality, functionality and reliability. KELLER Druckmesstechnik AG, including KELLER Gesellschaft für Druckmesstechnik mbH in Jestetten, is certified to ISO 9001. This means that our measured values can be fully traced to national standards. As a company that operates on an international scale, KELLER is represented at a number of locations around the globe. Because we are committed to offering the best service to our customers, you will always receive advice in your local language. KELLER has ten branches in Europe, Asia, South America and the USA. Various representatives and distributors also support our branches in other countries.

    Website Open In New icon See all products

  8. WALTER UHL TECHNISCHE MIKROSKOPIE GMBH & CO. KG

    Germany

    Verified by europages badge

    Founded in 1943 by Oskar Uhl, Walter Uhl technische Mikroskopie GmbH & Co. KG has been synonymous with top quality and precision in the fields of precision engineering and optical metrology for over 80 years. Based in 35614 Asslar, Germany, our company has established itself through continuous development and expansion as a leading provider worldwide within the industry. We offer a comprehensive range of precision engineering and optical components and devices that are used in numerous sectors, including: Measuring microscopes: portable, video and workshop measuring microscopes, ideal for precise measurement and testing activities. Microhardness testers: devices for testing hardness in accordance with Vickers and Knoop, suitable for loads from 1 g to 2 kg. Positioning systems: linear, cross, rotary and lifting tables as well as tripods and control units for exact positioning requirements. Small devices: pen microscopes, centring microscopes, portable devices and alignment checkers. Custom solutions: individually tailored solutions for special requirements in the field of optical metrology. Our products are characterised by high precision and reliability. We achieve this by incorporating cutting-edge technologies and continuous research and development. With our own construction and software engineering department, we can offer tailor-made and customer-specific custom solutions perfectly adapted to the needs of our customers.

    Website Open In New icon See all products

  1. DUOTECHNIK MANUTENCION S.A.

    Spain

    Verified by europages badge

    At Düotehnik Manutención we aim to satisfy our clients. This is why we have since our founding constantly worked to continually improve to satisfy the market's latest requirements. We are a company committed to our work, making us stand out from the competition Check for yourself by trying out our services.

    Website Open In New icon

  2. NOVOTAS GMBH

    Germany

    The company NOVOTAS GMBH, is a Manufacturer/ Producer, which operates in the Chemical and pharmaceutical industry - machinery and equipment industry. It also operates in the automatic measuring systems, measuring systems, dosage stations, and dosage systems and systems industries. It is based in Willich, Germany.

  3. TURKOGLU

    Turkey

    Sensoylar company was established under TURKOGLU brand name in 1978, one of the Turkey’s premier manufacturers of contruction materials such as water meters, valves, water and gas flexible metal hoses, installation and fittings, fire equipments products and special fabrications. It has become one of the leading companies in the industry while being a professional and reputable brand in the field by its product reliability, durability, quality and stabilty. Our products can be used in all fields of water, gas and wastewater industry. The company has been continuing to invest in technological products based on the needs of the markets by R&D activities in order to increase sales rate for both the domestic and international markets. To meet to the needs of its customers and dealers, the company has a wide network of dealers in domestic and international markets by expanding its product range, product quality, sales and after-sale services. The company has been exporting to many markets worldwide and has acheived to be followed by competitors in the industry. Most of the production and managerial process is certificated with ISO 9001, IS0 14001, OHSAS 18001, CE marked, MID, ISO-EU directive, GOST, EN and TSE norms. Increasing the number of engineers and technicians which enable to attain better quality, dynamic and profossional structure.Our company aims to be the brand that is followed in the industry by following the determined vision and missions. Sensoylar / Turkoglu

    See all products

  4. MERMEC SPA

    Italy

    Headquartered in Monopoli, Italy, the MERMEC Group has shaped the future of railway and has become a worldwide leader in developing cutting-edge technology able to advance safety, efficiency and availability of railways and rapid transits worldwide. The MERMEC Group is the sole global supplier able to provide a careful and thorough perspective on how your railway assets are really performing and evolving over time and has more than 60 different types of measuring and inspection systems. The product portfolio includes automatic train protection systems and trackside equipment, complete with design, testing, installation and project management. All the solutions are fully compatible delivering all the performance that efficient and modern railways demand.

  5. VISION ENGINEERING

    United Kingdom

    World Leaders in ergonomic microscopy, digital microscopes, digital 3D visualisation and metrology solutions. Our pioneering eyepiece-less stereo microscopes, digital 3D inspection systems and metrology systems enable our customers globally to improve quality, efficiency and productivity.

    See all products

  6. INOEX GMBH

    Germany

  7. DR. JOHANNES HEIDENHAIN GMBH

    Germany

    DR. JOHANNES HEIDENHAIN GmbH develops and manufactures linear and angle encoders, rotary encoders, digital readouts and numerical controls for demanding positioning tasks. HEIDENHAIN products are used primarily in high-precision machine tools as well as in plants for the production and processing of electronic components. With our extensive experience and know-how in the development and manufacture of measuring devices and numerical controls, we create the groundwork for the automation of tomorrow’s plants and production machines. Competence in the area of linear and angular metrology is reflected by a large number of customized solutions for users. These include the measuring and test equipment developed and built for many of the world’s standards laboratories and the angle encoders for various telescopes and satellite receiving antennas. Naturally the standard products also profit from these experiences. The high quality of HEIDENHAIN products depends on special production facilities and measuring equipment. Masters and submasters for scale manufacturing are produced in a clean-room building, conceived especially for this purpose, with special measures for temperature stabilization and vibration insulation. The the machines required for the manufacture and measurement of linear and circular graduations and copying machines are also developed and built by HEIDENHAIN.

    See all products

Find quotes for

screen europages
A page for your business
Add my business
Interactive map of the field Arrow Right icon
Filters

Results for

Manufacturer Producer - Length measuring systems

Number of results

27 Companies

Countries

Company type

Category