Results for

Manufacturer Producer - German protection

47 Companies

17 Products

GMR GESELLSCHAFT FÜR METALLRECYCLING MBH

Germany

GMR Gesellschaft für Metallrecycling mbH was founded in 1991. Today, the company employs a team of 12 and operates around the world. By 2001, we were already recording an annual turnover of 1.5 million EUR. The company specialises in the environmentally friendly recycling of used mercury and every type of waste containing mercury, with the aim of recovering the precious raw material, cleaning it and returning it to the economic cycle as mercury of the highest purity grade. The company has recently seen success in the vacuum treatment and immobilisation of naturally radioactive slurries and residues that contain mercury and in the production of precious metal concentrates out of waste products and residues containing precious metals. From its base in Leipzig, the company operates four vacuum recycling plants of varying capacities, each of them compliant with the German Emissions Protection Act (BImSchG).

Website
HÖNTZSCH GMBH

Germany

Flow measurement technology has been the core of our business since our company was founded in 1966. From 1976 onwards, Höntzsch has worked to develop, manufacture and distribute innovative and groundbreaking products in the flow measurement sector, and has been part of the DMT GmbH & Co. KG group in Essen as of 2012. Höntzsch also offers solutions for special areas of application such as explosive zones in accordance with ATEX, for gases with operating temperatures up to 550 °C, for measurements under regulatory control in accordance with the "TA Luft" air pollution control regulation and sections 13 and 17 of the "BImSchV" (the German Federal Imission Protection Ordinance), for high flow speeds of up to 200 m/s or for flows with changing directions of flow. Our DAkkS-accredited calibration laboratory completes our range. Air flow meters, calibration service for electrical measuring and testing equipment, development of flow meters, intrinsically safe sensors for explosion protection areas, compressed air measurement, intrinsically safe equipment for explosion protection areas and compressed air flow meters

Website
PPS GMBH

Germany

PPS – your specialist for plastic card printing, encoding and personalisation of RFID cards, chip cards, gift cards, voucher cards, membership cards, customer cards and lettershop services. With over 30 years of experience, we are happy to advise you in your card project, whether it be finishing, further processing such as application on carriers, shipping individually printed plastic cards directly to customers as a mailing, software solutions for access systems and plastic card accessories – with PPS you will receive all services from a single source. Founded in 1986, PPS GmbH is now a second-generation family-owned business and stands for highest quality and absolute customer focus. We adhere strictly to the German Federal Data Protection Act.

All the products for "german protection"

ID cards / employee ID cards

See all products
BETEC LEUCHTEN MANUFACTUR GMBH & CO. KG

Germany

The early decision to pursue individual design and technology requirements rather than the prevailing trend was instrumental in guaranteeing a success that continues to this day. Since the launch of the very first product, the company has built a wide range of designer luminaires, each featuring state-of-the-art technology. With its minimalist housing, the Clarus picture light was a revolutionary design. A cult product awarded German cultural heritage protection and various internationally renowned design awards. Subsequent developments focused on living spaces, offices, bathrooms and architectural supporting lights. The company designed luminaires to illuminate these areas with "Light for the future®". The decision to produce individual hand-made lamps in selected materials and to customer specifications goes resolutely against the current "mass vs class" trend.
PETEC GMBH

Germany

PETec GmbH – Ergonomic industrial and assembly benches. Our ergonomic and height-adjustable assembly benches for trade and industry offer solutions for virtually any area of application. Whether as a workbench, welding bench, lifting and assembly bench or as a replacement for a conventional scissor lift table, our benches provide an improved platform – so you always have the right working height! The length and width can be chosen freely. The material and shape of the benchtop can be chosen freely. Manual or electric height adjustment. Load-bearing capacity of 3000 kg. Flexibility to move the bench thanks to heavy-duty rollers. Various different drawer systems are possible. Assembly parts such as vice, compressed air and power supply connection are possible. Ergonomics and safety at the workplace. Protected by the German Patent and Trade Mark Office.

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

GMS D.O.O.

Serbia

GMS is a high quality producer of protective clothing and workwear, with 30 years of experience in the clothing production, and more than 10 years experience in protective clothing - mostly flame retardant and multinorm. Since 2006 we are present on European market: Germany, Slovenia, Croatia, Slovakia, Finland. In case of any RFQ's or information requests, please send us an e-mail on n.stojanovic@gms-workwear.com, and we will gladly reply to you as soon as possbile.
KAMBET

Poland

KAMBET is a Lastrico floor tiles manufacturer based in Jeleśnia, in the Silesian Voivodeship. We have been producing terrazzo floor tiles for over 20 years. In our plant, we use Italian technologies and machines. The tiles are compliant with Polish PN-91/B-10130 standards, as well as with German DIN 18500 standards. During manufacturing we use multicoloured aggregates, such as marble flour. Thanks to this, we obtain unique colours of the tiles in various shades, from white to cream, orange, green, blue, grey, pink or yellow. We manufacture all tiles on high-quality cement. We have completed projects with the use of tiles made of white Portland cement. The products we present are very durable and easy to care for. Thanks to this, they are a perfect finishing material in commercial, office, service and even industrial facilities. On our website we present available patterns of tiles, however, at the client's request, we can prepare a custom-made product. We offer transportation of goods protected with Styrofoam and thermo-shrink film. We invite you to avail yourself of our offer – KAMBET from Jeleśnia.

Website See all products
HEINRICH BÜSCHER GMBH SONNENSCHUTZSYSTEME

Germany

Since its foundation in Bielefeld in 1929, Büscher has been a pioneering blind manufacturer supplying the German market. During the 1960s, the company expanded and continually broadened its range of products. Today, Büscher offers all products related to indoor and outdoor privacy and sun protection. Individually tailor-made, the products are constantly maintained and developed further with the highest demands for the quality of the used materials and systems, as well as function and durability.

Website
VOLFI VOLKER FISCHER GMBH

Germany

As a specialist trade partner, VOLFI is a leading German manufacturer for gardening and landscaping systems with over 25 years of experience. VOLFI systems are synonymous with quality, reliability and innovation in the industry. The versatile, combinable complete system offers decisive advantages when laying slabs and paving in outdoor areas. The successful family business has been operating since 1995 and is now in its second generation. Most items are produced and packed with our own tools in Sauerland. Through dealers in Germany and Europe, we have extensive testimonials and expertise in making major projects a reality. Many products are subject to patent/utility model protection and are available exclusively from VOLFI. There is sufficient stock available for many colours and material grades.

Website See all products
LR COATINGS GMBH

Germany

LR Coatings GmbH in Neckartailfingen (Germany) is a new, rapidly growing and extremely dynamic German company which specialises in fluoropolymer coatings. It stands out first and foremost for its flexibility and openness to new individual coating solutions without neglecting quality and delivery reliability. The experience and expertise of the two founders has been gathered over a decade and includes the chemical industry, food, textile, paint, paper and automobile manufacturing, offshore, conveyor and joining technology as well as film processing. Whether it's non-stick coatings with Teflon®, corrosion protection with ETFE, E-CTFE (Halar®), PFA or Rilsan, minimising friction with Xylan® or for non-stick purposes – the team at LR Coatings GmbH provides tailor-made solutions in virtually all product areas and industrial sectors in order to increase the productivity and efficiency of your systems.

Website

POLYHOSE GERMANY GMBH

Germany

POLYHOSE Germany GmbH – A strong German subsidiary of the Polyhose group. An overview and profile of our product range can be found here. Do not hesitate to contact our POLYHOSE Germany Team for any individual questions you may have. POLYHOSE Germany GmbH's broad range and comprehensive services include the following products: Rubber and thermoplastic hydraulic hoses, PTFE smooth and corrugated hoses, industrial hoses, sewer rinsing hoses, ultra high pressure hoses, stainless steel corrugated hoses, protection coils, spray paint hose for LP and HP up to 700 bar, coils/fixed lengths, fittings, suitable for use with all well-known manufacturers, spray paint nozzles for airless and air-assisted airless procedures, filter cartridges for spray guns, pumps and suction systems, adapters, tilts, accessories. Our seasoned and expert team in Nuremberg are happy to provide you with advice and support – our company name is the only thing to have changed: EXITFLEX has become POLYHOSE Germany.

Website
MAYR, CHR.

Germany

mayr® is one of the most traditional, but also most innovative German companies specialising in drive technology. From humble beginnings in 1897 to becoming the market leader for safety couplings and safety brakes that are optimised to suit the application – the company can look back at over 100 years of success. Looking to always develop better solutions and applying the company's many years of experience and expertise, mayr® now sets standards in drive technology. The broad range of mayr® products with many versions that are optimised to suit the specific market or sector includes zero-backlash shaft couplings, safety couplings, electromagnetic couplings and brakes as well as high-quality direct-current drives. These are used in a very varied range of sectors and prove themselves day after day in all areas of mechanical engineering. Certified in line with: DIN EN ISOI 9001: 2000 (quality) and DIN EN ISO 14001 (environmental protection), OHSAS 18001/OHRIS (occupational health and safety)

Website

Product recommendations

Germany

Germany

Germany

Germany

See more products

LACERS GMBH

Germany

Lacers has stood for sustainable and individually produced packaging for more than 40 years. We work with start-ups, medium-sized companies through to well-known companies on the German stock exchange. Resellers also form part of our long-standing customer base. Everyone appreciates our exceptional service and the diversity of the flexible packaging world. Protecting the environment and sustainability are top priorities for us, and were our focus early on in modern and sustainable packaging concepts. Since then, many of our products are up to 100% recyclable and others are compostable. As early as 2016, Lacers stopped using pouches with aluminium altogether, focussing on constant improvements to recyclability of packaging. Curious? Please get in touch with us. Together, we can bring your project to life. All products from a single supplier: Manufacturing, production, printing, design and logistics solutions. And, of course, we ensure "just-in-time" deliveries to your front door. We look forward to every new challenge and hope to receive a non-binding enquiry from you soon. We would be delighted to show you our performance strengths.

Website See all products
BAUFENS

Bosnia and Herzegovina

Baufens is a manufacturer of PVC profiles, panels (inox, PVC and Alubond), PVC sheets, window sills, wooden doors, finished carpentry such as PVC windows and doors, PVC & ALU roller shutters. The company was founded in 2005 and since then has been a respectable competitor in the PVC market. We achieve this by introducing new products into the range, following construction trends, certifying products in authorized laboratories, constantly educating employees and selecting suppliers who drive the same values. All products are certified and CE marked. Our priority is client’s satisfaction, which we provide through the guaranteed quality of Baufens products by using the latest technic machines and molding system, by producing finished windows and doors according to the wishes of our clients. We are producing 6 systems of a different profile series (8500, 7600, 7000, 6000 series, Unique slide and Basic slide systems). We are exporting PVC products and finished joinery to over 40 countries all over the world. Baufens products are high performance and proven durability, profiles are tested and verified by the best German testing institute (IFT Rosenheim). Baufens is undeniably the highest quality PVC profile on the market. We also offer an unparalleled choice when it comes to styles, colors, and glazing options to complement any home. Our products serve a variety of purposes and functionality: structural integrity, improved energy efficiency, water protection, decorative space.

Website See all products
METALINE GMBH

Poland

Designer, manufacturer and distributor of furniture and, among others: balcony balustrades, fences, metal elements, steel furniture, upholstered furniture, garden furniture, steel furniture with wooden elements. Distribution throughout whole Europe. Our team speaks Polish, German, French and English. Production is directed not only at large volumes - our flexibility also allows for small-scale manual production. Our main goal is to protect against corrosion by arc spraying and coating.

Website
SCHOCK GROUP

Germany

The SCHOCK GROUP is a group company with international operations and has its head office in the town of Urbach, near Stuttgart in south western Germany. At various sites across Europe, we develop and manufacture high-quality ball guides, telescopic rails, special profiles, plastic products and assemblies. These products are used all around the world in the automotive industry, major household appliances, the home and kitchen industries, as well as in many industrial applications . SCHOCK's key areas of expertise includes roll forming technology with a wide range of integrated processes. This means that we are able to produce high-quality smooth-running telescopic rails and high-precision profiles with extremely small tolerances and high material utilisation for our customers. Our high production depth enables us to offer a wide range of services in metal processing in order to produce your complex assemblies. With SCHOCK's powder coatings, we can produce high-performance and visually appealing product surfaces with long-term protection against corrosion and a customised colour scheme. SCHOCK uses advanced machinery to produce complex 1-component or 2-component plastic parts. Our areas of expertise also include mould manufacturing and tool manufacturing. Our German logistics hub supplies a continually growing range of over 150, 000 products in over 200 product categories for industry and trade right across Europe.

See all products
ABS SAFETY GMBH

Germany

ABS Safety is an expert in the development and installation of modern fall protection systems, such as attachment points and rope securing systems, guard rails and roof safety hooks. The family company from Kevelaer was established in 2003 and is now one of Germany's leading providers of rope securing and fall protection systems. As your partner for setting up, maintaining and testing modern fall protection systems, our solutions are used in a wide range of different sectors; these areas of application include roofs, windows, facades, machines, crane tracks and maintenance halls. Quality and safety are our top priority. We base our development and production processes on the provisions and regulations of the DGUV (German Social Accident Insurance), employers' liability insurance associations and labour law. Our fall protection systems comply with the applicable standards, such as DIN EN 795, DIN CEN/TS 16415 or DIN EN 517.

See all products
LUBCON LUBRICANTS UK LTD

United Kingdom

LUBCON LUBRICANTS UK LTD is the UK subsidiary of LUBRICANT CONSULT GmbH, a worldwide operating German lubricant manufacturer, developing, producing and distributing high-grade greases, oils, pastes and sprays for most industrial applications and manufacturing sectors. Known under the trademark “LUBCON®“ and founded in 1980, it has established an extensive network of subsidiaries and sales representatives around the globe. Efficient Technologies for Innovative Products The combination of the latest production technologies and qualification of staff enables the production of our tailor-made, economic and ecological lubricants. We operate according to the Quality Management System and attach great importance to the adherence of quality and environmental standards according to DIN EN ISO 9001 and 14001 for the protection of environmental resources. LUBCON complies with European and international standards and regulations such as REACH, RoHS, GOST, GOTS, GHS, enabling safety and transparency along the manufacturing and supply process. Engineering Services LUBCON’s extensive portfolio includes services such as laboratory analysis of lubricants and bearings, root cause failure analysis, lifetime calculations and comprehensive management of the entire lubrication process. Our focus is to provide sustainable cost-saving solutions using the right products and lubrication methods, leading to reduced consumption and downtimes and a minimised number of different lubricants on site.

All the products for "german protection"

Rapid FG 15 400 ml aerosol

See all products
KITO ARMATUREN GMBH

Germany

KITO® is a German manufacturer of safety devices for explosion protection and for vent valves for atmospheric application. KITO® devices are developed and produced for transporting and storing combustible fluids and gases since over 90 years in Braunschweig. Our products are applicable in the chemistry, petrochemical sector and pharmaceutical industry, renewable energy (bioethanol/biodiesel) as well as in the oil and gas industry. We also develop customized solutions for our customer’s installation or products. All our products correspond to the newest technical norm and safety requirements. With our world-wide network of representations we are able to provide a qualified local service for international customers. We continually update our customers as well as our maintenance partners for our devices maintenance in order to reach a long service life and a reliable function.

See all products
AGATHOR LEGAL SERVICES AND CONSULTANCY

Turkey

Agathor is a management consultancy firm with leading employees who are experienced and determined in their field. We are proud to represent international clients in wide range of public transactions and businesses. Our team has the greatest expertise to provide the highest level of accounting, auditing, consulting and legal services in English, French, German and Russian. What makes us different from others is that we take urgent action to assist you and solve problems. Clients prefer Agathor because we have the ability to put together multidisciplinary teams to tackle all challenges. We are a unique company who values highest quality service more than titles. This is why, we do not feel the need to publish the names and information of our personnel. Once you start working with Agathor, you will instantly notice our expertise by yourself. You are thinking about entering international markets but need a direction? Do you need a lawyer to start a company in your dream country? Have you decided to divorce in a country other than your home country? Did you sell goods to another country but did not get your money? Do you want to announce your new brand to the world? Have you entered the market but facing financial problems? The only team that can solve all of your problems is here. Agathor team will continue to be your invisible protection and perpetual consultant with its wide network and partners all around the world.

See all products

OPIS TECHNOLOGY GMBH

Germany

Opis Technology GmbH is a young German product design house, headquartered in Dresden. It was founded by designers and engineers with extensive industry experience. Its focus is the design of innovative and remarkable lifestyle products. There exist numerous protective cases for the iPhone, but it is a rarity to have form join function in such an impressive way as is the case with the mobile garde. Precious leather in 5 variations envelops, protects and adorns the iPhone. Business cards elegantly slide into the rear part of the protective case. In this way they are completely protected from outside influence and do not affect the overall appearance of iPhone and case. The “lop ear” corner in the front flap is more than pure adornment; even when the front flap is fully folded back it allows complete use of the camera and so affords the opportunity to take beautiful pictures. If you belong to the growing number of stressed-out smartphone users, the founders of Opis technology offer you a solution so stylishly simple you will wonder why nobody has thought of it before. Calling your friends and family with one of our telephones is a sensory experience that leaves you free to just enjoy the conversation, with nothing else to distract you or to worry about. Opis retro telephones are fully compatible with modern phone connections, and if you want to go "plug-less" they are available in mobile phone versions, too.

See all products
TOPCOD DEUTSCHLAND GMBH & CO. KG

Germany

Topcod Deutschland GmbH & Co. KG is your partner when it comes to desiccants, moisture indicators, ESD foils and VCI foils. As a German sales partner for Topcod Industry Co., we can offer you complete solutions, consisting of foil bags with desiccant and a moisture indicator that displays the current level of moisture. Optimal moisture protection for your goods. Our desiccant products are highly efficient and environmentally sustainable. They are non-toxic and food-safe, and are produced in accordance with all existing standards and regulations; including DIN55473, MIL-D-346E, IPC/JEDEC J-STD-033D, RoHS, REACH. We do not use dimethyl fumarate or cobald chloride. Topcod has over 20 years of experience in the area of desiccants, and supplies to well-known customers across the world from the Industry, Electronic Equipment, Automotive, Health, and Clothing sectors.

See all products
MEDICAL BASE MINDEN GMBH & CO KG

Germany

At Medical Base Minden, we specialise in the production and marketing of medical and personal protective equipment and medical consumables and rapid test procedures for early detection of viruses such as SARS-Covid-19, and are a German brand company. Medical Base Minden is an owner-managed family company headquartered in Minden, East Westphalia. For over five years, we have been producing and selling our range of disposable articles, hygienic clothing and industrial safety products in Europe. We are an innovative and growing company with an annual growth rate in the upper two-digit percentage range. Our products are used in hospitals, veterinarians, maintenance, gastronomy, catering and hotels, as well as in industry and trade – anywhere that hygiene, cleanliness and safety play a crucial role. We follow a clear mission statement to ensure we meet our goals: To ensure continuous improvement, develop new products that meet customer needs, create jobs in the region and to integrate sustainability, climate and environmental protection into our daily actions. This is what Medical Base Minden stands for. That is who we are. You can take our word for it!

See all products
MEDI-LAABS GMBH

Germany

Medi-Laabs GmbH offers high-quality melt-blown filter mesh and raw materials for manufacturing hygienic masks, medical masks, and FFP1, FFP2 and FFP3 half masks. The company is a German manufacturer of non-woven fabrics that are used as filter layers in protective masks, as well as a manufacturer of masks. Dr Magdalena Laabs, owner of Medi-Laabs GmbH, supplied, and started and implemented production of several dozen machines for manufacturing masks and half masks, the so-called respiratory face mask 2020. Due to the lack of filter fabric on the market and Magdalena Laabs' access to the technology of her production, she decided to introduce a special vehicle that specialised in manufacturing high-quality melt-blown non-woven fabrics. Machines working to manufacture Dr. Laabs masks can be found in Germany, Great Britain, Poland and other European countries. Further machines are in production.
METASTAL

France

Our designer bin shelters and covers are imagined and designed by our design office teams. Our products are made from galvanised steel sheets. We provide our clients with several different models. Modern and unique designs so that bin shelters become a decorative item providing a touch of elegance to the environment. We are very environmentally aware, which is why we provide bin shelters and covers with designer sheet metal which describes the type of waste to make sorting as easy as possible. The type of waste is clearly written on each metal sheet in 3 languages (French, German and English) with distinctive colours. Clients can also choose other languages if they wish. Our trilingual website offers our products to clients throughout Europe. In addition to galvanised sheet metal, we apply a layer of paint by thermolaquering to efficiently protect the steel and therefore guarantee our products for 10 years.
BORNIT-WERK ASCHENBORN GMBH

Germany

BORNIT-Werk Aschenborn GmbH is a traditional company with a history stretching back over 145 years, and is continuously expanding its business operations. The company is based in Zwickau, Germany and is active throughout the German market with a complete range of construction chemical products for protecting and restoring foundations, façades and roofs and a wide variety of products for road construction. The company was preceded by the firm "Zwickauer Dachpappen- und Asphaltfabrik" (founded in 1868 by Alwin Aschenborn), and has developed into a modern medium-sized industrial company over the course of the five family generations since. Following its nationalisation in 1972, whereupon it was renamed to "VEB Bitumen-Chemie Zwickau", BORNIT® became one of the first companies in Saxony to be re-privatised, which took place in 1990. A program of reorganisation and reorientation together with investment totalling in the millions have enabled BORNIT® to become a manufacturer of cutting-edge construction chemical products.
HYWEMA JOSEF SCHWAHLEN GMBH & CO.KG

Germany

The precision machine tool factory, Josef Schwahlen, was founded by Josef Schwahlen in 1922. Special hydraulic tools, primarily for boiler construction in shipyards, boilers and for the Deutsche Reichsbahn (Imperial German Railway) were built here until the plant was destroyed in the Second World War. After a fresh start in 1949, work resumed under the registered name of Josef Schwahlen, but was subject to severe restrictions imposed by the allies in shipbuilding in particular, which meant that production had to switch from hydraulic tools to mechanical and hydraulic lifting equipment. In 1956, the brand name HYWEMA® (Hydraulische Werkzeug -Maschinen – which stands for hydraulic machine tools) was protected Manfred Schwahlen. When Josef Schwahlen died in 1957, Manfred Schwahlen took over his father's company and continued to run it under the name HYWEMA® Josef Schwahlen in Wuppertal on a site covering approx. 28, 000 m2 with operating facilities spanning 18, 000 m2. After Manfred Schwahlen passed away in 1968, the company was registered in 1969 as HYWEMA® Josef Schwahlen GmbH&Co.. In 2004, the legal structure was changed to HYWEMA® Josef Schwahlen GmbH&Co.KG.
J. BOSCH LABORATORIES GMBH

Germany

FFP2 safety masks for pharmacies, institutions and companies. We would like to support you in distributing FFP2 masks to your customers and employees and offer you our FFP2 masks in large volumes. COVID-19 antigen rapid test, cassette VE containing 25 tests (Clungene or Bosch Laboratories brand with original manufacturer specification) Manufacturer: Hangzhou Clongene Biotech Co. Ltd., listed by the German Federal Institute for Drugs and Medical Devices. The coronavirus pandemic, which has been rampant for a few weeks now, prompted us, J. Bosch Laboratories GmbH, to start selling the crucial COVID-19 antigen rapid tests – which are currently so essential for tracing chains of infection – as early as the end of October 2020. Warehouse availability: Masks for everyday use, respiratory face masks, tested FFP2 masks, face masks with CE marking, FFP2 protective masks, protection class FFP2 (CE 2834), COVID-19 antigen rapid test.
TEDIMEX GMBH

Germany

Welcome on board! The impossible we do at once; the miraculous takes a little longer For more than 35 years under this motto, we have enjoyed the confidence of well-known shipping companies, shipyards and ship owners all over the world. Our range of services includes the entire range of high quality ship spare parts. We work together with renowned manufacturers. Even spare parts which are difficult to acquire, or custom-made products can be procured within a very short time. Our spare parts service can reach your ship in any port in the world. We look forward to developing a technically and economically perfect solution for you, too. We will also happily assist you with environmental protection measures and oil cleanup equipment. We deliver worldwide except for CIS/Russia. Please submit all requests in German or English. Our products.: Solar protection systems for ship bridges, Controls and instruments for marine equipment, Boat deck covers, Ship deck covers, Composite hoses, Loud Speakers; Rescue equipment, among many others.
FEUCHTER BEKLEIDUNGSMANAGEMENT AG

Germany

Feuchter Bekleidungsmanagement AG is a German, owner-managed company that has been manufacturing textiles for the military and authorities in Ringelai in the Bavarian Forest since 1957. We have many years of experience in processing non-woven fabrics and, in 2020, began producing high-quality type IIR medical surgical masks and FFP 2 masks in accordance with EN 149: 2001 + A1: 2009. Our FFP2 masks received CE certification at the beginning of this year. Since then, we have been supplying pharmacies, hospitals, medical supply stores, private and commercial customers, etc. With our PSA and medical lines, we offer protection against viral and bacterial infections. To enable us to guarantee 100% quality, we manufacture our masks exclusively in-house.