Results for

Manufacturer Producer - Electric-electronic profile

188 Companies

9 Products

KMC GROUP - MEKO METAL

Turkey

MEKO Metal, a leader in steel profile production since 1969, has grown from a 10, 000 sqmtr facility to a 100, 000 sqmtr powerhouse in Torbalı-Izmir under the KMC Group since 2011. Our collaboration integrates unique commercial and technical expertise, resulting in an annual production capacity of 150, 000 tons, consistently aligned with global technological advancements. Aspiring to secure a spot among the top 3 global companies for special profiles, MEKO Metal has witnessed a steady rise in export volume. Specializing in open, welded, and stainless steel profiles, our offerings cater to a wide array of industries, including automotive, furniture, domestic appliances, steel goods, decoration, heating & cooling, air conditioning, civil works & steel construction, scaffolding profiles, heated towel racks, solar energy systems, and agricultural irrigation & greenhouse. Our key sectors: •Standard Tubes and Profiles •Special Profiles •Automotive Profiles •Solar Energy Systems Profiles •Solar Energy Ground Mounting Systems •Solar Energy Roof Mounting Systems •Civil Works & Steel Constructions •Profiles for Agriculture and Greenhouse •Profiles for Electric & Electronics •HVAC Profiles •Stainless Steel Profiles Roll-forming offers a cost advantage over aluminum by replacing crucial production parts that traditionally require aluminum with roll-formed steels. We specialize in in-house design and production of molds, tools, rolls, and other essential components. Contact us for more !

All the products for "electric-electronic profile"

Animal Shelter Curtain Profile

Website See all products
OBERLAUSITZER ELEKTRO-SCHALTGERÄTE GMBH

Germany

Oberlausitzer Elektro-Schaltgeräte GmbH was founded in 1992 and today employs approx. 30 people. While switchgear assembly was dominant at the beginning, the production of customer-specific low-voltage switchgear and controls increasingly determine the profile of the company today. Today, the highest expectations and requirements are placed on electrical switchgear and control systems in all areas. Quality, safety and reliability are basic requirements that electrical and electronic systems must meet. Oberlausitzer Elektro-Schaltgeräte GmbH Weißenberg specialises in this. We have many years of experience and the greatest professional competence in all our working areas. Flexibly and at short notice, with components from leading manufacturers and using modern technologies, our qualified employees plan, design and manufacture electric control cabinets, controls and power distribution systems with the aim of always offering our customers the best quality and high benefit.

Website
SLS KUNSTSTOFFVERARBEITUNGS GMBH & CO. KG

Germany

SLS is your reliable partner when it comes to the production of hollow or solid profiles. We can offer you an extensive range of high-quality profiles made with professional expertise. Here is a selection of what we can offer: – Standard profiles – Special profile solutions – From 20 g/m to 4000 g/m – Different colours and thermoplastics – Hard, soft or rigid and soft compounds for co-extrusion applications. Profiles requiring great stability can be manufactured with fibreglass or carbon fibre on request. SLS can also cater for special requirements for the electronics industry with materials with conductive or anti-static properties. Our customers come from the following industries: Window and façade construction, metal engineering, mechanical engineering, electrical industry, packaging and furniture industry, insulation and the DIY sector. There are (almost) no limits to the design of customised products. Together with you, we work on your ideas and develop tailor-made solutions. We look forward to your challenges

Website
SEIFERT ELECTRONIC GMBH

Germany

Seifert electronic manufactures customised heat sinks to reliably dissipate heat from electrical components. As a high-performance partner to a wide range of industries, we now offer a variety of profiles, ranging from standard heat sinks to individually machined special profiles. Seifert electronic has made a name for itself over the years with heat sinks made of extruded aluminium profiles. Our team of more than 50 employees keeps a cool head when faced with any challenge and ensures that our customers' electronics do not overheat. In addition to a large catalogue ranging from small PC board heat sinks to high-performance heat sinks and finned profile heat sinks for forced cooling, we produce our heat sinks in almost all desired dimensions and precisely tailored for a wide variety of applications. Our cooling systems are always individual, dependable and economical. If you can't find what you are looking for in our range, we are happy to work together with you to develop a custom-made solution that is precisely tailored to your cooling application. Our free profiles and technical support help to achieve the maximum possible heat dissipation.

Website See all products
MAGBAT-EUROPE

Belgium

MAGBAT-Europe specializes in the development and production of electro permanent magnets on battery power. Our magnets have the great advantage that they can be used autonomously, independently of the main power supply. The powerful, built-in battery, provides a short current pulse through which the magnet inverts (magnetize). This status remains active until a subsequent flow pulse (demagnetisation). Because the magnetic force is independent from the electrical power, but generated by permanent magnets, our magnets are 100% safe. The low energy consumption is our engagement for a “GREEN” world. Operation is done by means of built-in electronic pushbuttons or radio remote control. Electro permanent magnets are used for the manipulation of single steel parts such as steel blocks, steel plates, cylindrical pieces and profiles. In addition, they are the ideal solution for mobile applications where no power supply is available (forklift etc.) Beside our standard product range, we also develop, produce and deliver tailor-made solutions. All our magnets are supplied with a multi-language manual and CE-certificate of conformity. Despite the fact that our magnets are maintenance-free, our service department is ready to provide you with the necessary support when needed.

See all products

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

CABLE CONNECT S.R.O.

Slovakia

Cable Connect provides expert knowledge of its employees for creating products and solutions for complex projects and has long-term experience as technological units used as final or semi products, cable assemblies and wire harness supplier for manufacturers and OEMs Manufacturing technologies and processesAutomated single wires processing: Wires cutting, stripping, crimping (AWG11 to 32) Single crimp Double crimp Crimp with installed seal Wire tinning Wire marking by printing (BK, WH) Automated cutting and stripping operations: Wires of different cross-sections (AWG11 to 32) Flat cables with different pitch Round profile cables (up to  22mm) Crimping and pressing: Semi-automated machines for crimping and pressing Processing of large range of electric and electronic components of different well-known suppliers (TE connectivity, JST, Molex, Stocko, Lumberg, Hirose, ITT Canon…) Stripping: Stripping wires of different cross-sections Flat cable stripping with different pitch Bandaging: ....
VISAN VIDA SANAYI

Turkey

Visan Vida Industry started its activities in Istanbul, Turkey in 2013. Our factory, which is established on a total area of 5000m2 with 3.500m2 closed area, 1500m2 open area and raw material warehouse, has an annual production capacity of 1.5 Billion Pieces. It provides services in the supply of screws and fasteners to companies from many different sectors, primarily White Goods, Electrical Appliances, Electrical and Electronic products. As a product item, we manufacture products up to 100mm in length with a min Ø2 max Ø8 dimensions. Screws in all head shapes (Pan Head, Countersunk Head, Raised Countersunk Head, Hex Washer Head, Button Head Etc. PZ-PH-TX-SW Recess Types) and All Thread Types (Metric, Sheet Metal, Chipboard, Plastic, Plastic 30°, HiLo, Braked, Grooved), rivets, eye rivets, pins, stepped pins etc. We manufacture our products from iron, steel, stainless steel, brass and copper materials. In our own laboratory; We perform Hardness Test, Salt Spray Test, Tensile Test, Profile Projection, Recess depth and all other measurement determination processes. We are coating Black, Yellow, White, Geomet, Galvanized coating types in accordance with 48H, 72H, 120H and 720H corrosion resistance. Tufloc and Loctite types can be made as Screw Locking types. It offers its customers free of charge raw material, heat treatment, coating and material output quality reports for all shipped products.
DOGUS ALUMINIUM

Turkey

We are an entegrated aluminium profile company which produces all aluminium profiles for various industrial sectors. There are 3 extrusion presses in our current facility. In our molding room, modern machines such as wire melting and CNC milling. We have two static paint units. The capacity of these facilities is 4800 tons / year. We have modern and qualified anodizing unit. The annual capacity of our anodizing facility is 3800 tons / year. We are specialized in aluminium products. We provide extruded aluminium profiles for various sectors such as; Standard profiles (roundtube , rectangular, U profiles, T profiles, flat bars, angle profiles etc.) Furniture, Decoration, Construction, Automotive, Heating, Ventilation, Air conditioning and electric-electronic sectors.

See all products
IHSANGAZI INTEGRATED WOOD INDUSTRY

Turkey

Altim Aluminium has been established in 2003 and has been conducting its services in Aluminium profile production since November 2003. Our company has been rendering services for many companies and sectors in line with the customer requests with its personnel experienced in aluminium extrusion and its 900 and 1460 ton press machines. The production range consists mainly of automotive sector, electric-electronic industries, machinery and equipment manufacturing, Chemistry and Food industry, architectural applications (Facade systems, doors, windows, accessories and various constructions), construction sector, (dilatations, HVAC), advertising sector and furniture manufacturing.
SAINT ANNS SHEET METAL COMPANY LTD

United Kingdom

The Saint Anns Sheet Metal Company manufactures a wide range of sheet metal components in many different types of materials (including colour coated): Laser profiling using the latest TRUMPF 3030 WITH INTEGRATED SHEET LOADER AND UNLOADER CNC punching with Amada 255CNC bending using Amada, Trumpf and Promicam press brakes.Welding - mig welding, tig welding and spotweldThread and nut inserting Production tox jointing and more Sheet Metal Processes As specialist CNC sheet metal engineers to the electronics industry we have years of experience in the fabrication of instrument enclosures for a wide range of applications such as computing, communications, defence, sport, electronics and scientific apparatus.Panels and enclosures include architectural components, panels for standard and bespoke machinery and shelving systems.Fascias are applied to a wide range of products such as lifts, reception desks, process control systems and much more.Sheet metal products manufactured for specific industries include: Enclosures Bespoke PC Enclosures , Cable Management metalwork, Fruit Machine parts, Automotive Brackets & metalwork, Refrigeration metalwork, Catering Equipment metal work, Transformers Electrical enclosures, Electronic enclosures Computer security enclosures, Refrigeration metalwork, Computer rack enclosures, Audio front panels, Audio enclosures, Power supply enclosures and much more

SHENZHEN PROMOSTAR HARDWARE CO.,LTD

Germany

ShenZhen PromoStar Hardware Co., Ltd is a company who specialize in Metal CNC machining parts, CNC turning parts, CNC milling parts, stamping parts, sheet metal parts, welding products for all kinds of industry. The materials we used to worked were stainless steel, aluminium, titanium, brass, copper, carbon steel, POM, PEEK and so on. The headquater of Promostar located at ShenZhen, China with a 2000² meter workplant.Since 2016, Promostar has an office in Meerbusch, Germany. Since 2021 lunched a 3000² meter workplant in Jiangxi China. We can meet all industry demands, such as : Austronautic, Optik, Sensor, Electronic, Automotive, LED lighting, furniture, machinery & equipments, medicial equipments, plastic & moulds lines and so on. We can reach the tolerance within +/-0.002mm. The material we are using can be reached the standard cetifications from ROHS, REACH. Promostar invested a lot on the machines and worker technologies and we have a strong human resources department. All our team have more than 8 years relationship. We work on team. PromoStar is getting a good credit around the world. Please do not hesitate to contact us for more information !

All the products for "electric-electronic profile"

Machining rhombic knurled.

E-cigarette shell aluminum processing.

Website See all products
LIVA GROUP ELECTRIC ELECTRONIC CONSTRUCTION

Turkey

Liva Group is the leading manufacturer and implementer of lightning rod systems in Turkey, based in Izmir. With our knowledgeable and expert team, we operate out of our 4000 m2 closed area and 2500 m2 open area facilities, producing 97% of our products in-house. Our range of products includes lightning protection systems, active lightning rods, Franklin rods, Faraday cage-type lightning protection systems, equipotential bars and lightning protection equipment, and thermo-welding powders and molds. Since our establishment in 2000, we have offered consultancy, project design, undertaking, and engineering services related to Electrical Systems, Security Systems, and Automation. Our history dates back to 2004 when we acquired our legal entity as LIVA GROUP LTD. In our first year of operation, we focused on implementing application projects and created an AR-GE and Design Department to produce for the electricity sector. We subsequently registered our brand as LIVA for our products with the Turkish Patent Institute Trademark Department Chairmanship. We take pride in our extensive portfolio of Liva-branded products that have received approvals/documents from relevant institutions. Our vision is to continue advancing and innovating while delivering exceptional service and product quality. For more information about our products and services, please visit our website or contact us directly.

All the products for "electric-electronic profile"

B TYPE PARAFUDR MODEL NO: LG B 12.5 275 RM/4P

B TYPE PARAFUDR MODEL NO: LG B 50 RM/3+N

Website See all products

SEACOMP

United States

SEACOMP is a design and manufacturing partner for electronics in the consumer, medical, and industrial spaces. We take your innovative idea from concept to a physical product that can be distributed worldwide. Our focus is bringing your new product to life through our proven NPI (new product introduction) process: - design engineering and design for manufacturing (DFM) - production preparation and setting up your supply chain - scaling to volume production - optimizing your production processes and supply chain Founded in 1989, our services have transformed over the years to who we are today: your design and electronics manufacturing partner. As a global company, we offer sales and distribution within Europe, design engineering at our U.S. headquarters and a wholly-owned ISO13485 certified facility in China. We plan to open a Mexico facility in 2023. Developing an electronic product is a long process with many individual decisions that must all come together. A wrong decision can have an undesirable cascading effect putting your product launch at risk. Simplify your product development journey by partnering with SEACOMP: we guide you through the entire process from engineering to supply chain set up and everything in between. With SEACOMP, you’ll have design and manufacturing expertise on your side so that you can focus on growing your business. We know the challenges that come with developing a new product and exist today to help you successfully launch your device.

All the products for "electric-electronic profile"

Turnkey Electronics Manufacturing

Website See all products
PRÜFREX INNOVATIVE POWER PRODUCTS GMBH

Germany

PRUFREX has mastered the development, production and assembly process all the way to the completion of installation-ready electronics components. As a manufacturer of electronic control units and digital ignition systems, we have the whole EMS context covered at the highest level. Coil winding technology, circuit board assembly, component assembly, testing and potting – PRUFREX performs the whole production process under one roof. 100% functionality tests, for example ICT/FCT, accompany the production process and ensure minimal return rates. Manufacturing is located in Germany and the USA. Whether conventional manufacturing, or semi-automated or fully automated production: With us, you can count on the highest quality as well as economic efficiency. One of our special strengths here is the PX ROBUST DESIGN. We can bring competitive product improvements into production quickly, economically and tailor-made for your application. The best engineering department in the competitive environment with more than 1, 000 successful development projects form the foundations on which PRUFREX develops its forward-looking market solutions. We are a development partner coming from the standardised, highly integrated Small Engine sector. Our highly adaptable modular engineering is closely integrated with in-house production.

All the products for "electric-electronic profile"

Flying probe test

Inline AOI

Test equipment construction

Dispensing technology

Potting components

Website See all products
SHENZHEN TENKING TECHNOLOGY CO., LTD.

China

Shenzhen Tenking Tech has always adhered to the principle of "quality first, unique products, continuous creation" and has become a leading manufacturer and enjoys a high reputation in the electronics industry. Time and experience have also brought us to embrace a global view of the development of consumer electronics. With 14 years of export experience, we are grown up to 4 production lines and over 200 workers in 2022. We have been winning numerous clients' trust and support, still providing OEM/ODM services for well-known brands for customers in over 70 countries. Advantages of ODM and OEM: 1. Well-equipped 2800 square meters assembly workshop, 4 production lines & 150, 000 units/month capacity to ensure all received orders on time delivery. 2. The 1200 square meters injection workshop makes ODM faster, cheaper, and safer. 3. Professional R&D and engineering teams make your ideas a reality. 4. 100% inspection of finished products to ensure that the product quality achieves perfect performance. 5. Long-term relationship with UPS / DHL courier makes the shipping cost to Europe competitive and on-time delivery. Do not hesitate to contact us for more information !

All the products for "electric-electronic profile"

CC12

WCC22

CH05

Website See all products
MAGNESCALE EUROPE GMBH

Germany

Magnescale Co., Ltd. is a globally leading manufacturer of high-precision length measuring systems, angle measuring systems and measuring sensors based in Japan. Magnescale was founded as Sony Magnescale in 1969 and has been part of the DMGMORI Group since 2010. MAGNESCALE™, DIGIRULER™, SmartSCALE™ and DIGITAL GAUGE™ are measuring systems with a magnetic operating principle. As a result, they are extremely insensitive to contamination, while providing a high level of precision and reliability. These length and angle measuring systems are therefore typically used for speed and position control in machine tools. Thanks to their robustness, our measuring sensors are mainly used for quality control in assembly and production plants for series production, e.g. in the automotive industry. LASERSCALE™ measuring systems work according to an interferometric laser operating principle, which generates a very high signal quality. This helps to achieve very high resolutions in the single-digit picometer range. These measuring systems are primarily used in semiconductor production and in measuring machines. Outside of Japan, Magnescale Co., Ltd. has sales companies in Germany (Wernau, near Stuttgart) and in the USA (Irvine, California) and is also supported globally by a large network of distributors and retailers.

All the products for "electric-electronic profile"

DK812S Digital Gauge

DK830S Digital Gauge

LY72 Digital Multifunction Display

LY71 Digital Multifunction Display

Website See all products
CORONEX ELECTRONIC GMBH

Germany

Coronex Electronic GmbH has been one of the leading EMS service providers in the Rhine–Ruhr region for 45 years. We offer a complete service, from the initial idea right up to the tested and audited products, with the greatest possible flexibility, speed and quality. At every point in the product life cycle, from the first template through series production right up to logistics and repair services, we are your capable partner. In addition to manufacturing, we undertake extensive auditing and testing procedures (including AOI, X-rays, in-circuit, function and climatic tests, flying probe, boundary scan, etc.). With our fully automatic high bay storage comprising 2600 europallets, we offer all imaginable logistics solutions. Our company is certified in accordance with DIN EN ISO 9001: 2015 and has ATEX approval in accordance with DIN EN 80079-34 for areas at risk of explosion. Due to the high degree of automation, we offer "Made in Germany" products at very competitive prices.

Website
THERMA THERMOFÜHLER GMBH

Germany

Good by tradition – innovative measuring technology from Therma. Welcome to Therma Thermofühler GmbH, your innovative and experienced partner in all aspects of temperature measurement. For over 30 years, we have been highly regarded for our professional expertise, our high-quality products, and our impressive service and delivery capabilities. Benefit from our experience, our insistence on the utmost precision and our comprehensive understanding of temperature measurement. One of the focal points is developing and producing of special parts. Individual products for temperature measurement of any given measuring task are developed and manufactured in-house. Our very short development and delivery times are a great strength in implementation. We look forward to your next project.

All the products for "electric-electronic profile"

Extension

VLM thermocouple extension | Teflon | Type K

Website See all products
FEINMETALL GMBH

Germany

FEINMETALL GmbH. Precise and sophisticated contact solutions are an important success factor particularly for testing electric and electronic components and products. Feinmetall offers comprehensive contact solutions for the electronics, automotive and semiconductor industries, thereby providing an important contribution for your quality management. Both of the company's product groups, namely test probes for contacting printed circuit boards or cable harnesses, as well as probe cards for the semiconductor test, complement each other perfectly, resulting in unique skills in cutting-edge precision. For over 50 years, Feinmetall has been a reliable partner in the international high-tech industry. The company is therefore represented worldwide with sites in the USA, Czech Republic, Tunisia, Mexico, Singapore, Taiwan and China, as well as headquarters in Germany.

All the products for "electric-electronic profile"

Contact Probes for PCB Test

Kelvin Probes

Fine Pitch Probes

ViProbe Probe Cards

Test Connectors

Website See all products
NEWSUN PV TECHNOLOGY CO.,LTD

China

NEWSUN PV TECHNOLOGY CO., LTD (NSPV) integrates design, development, production, sales as the modern management of enterprises. Product line includes PV solar system(connector, solar BIPV junction box, PV cable, installation accessories, controller, distribution box & combiner box, etc.); Protection system(earth-fault protection, diode connector, solar inline fuse connector, circuit breaker, etc.) and system optimization, which are mostly meet the standards of TUV, ETL, CE.Products cover the fields of PV system application, solar street light, solar hybrid street lighting and others, and Energy Performance Contracting (EPC). Solar energy has a great potential as a zero emission, zero consumption, and clean, safe, environmentally friendly, renewable energy. NSPV strives to make contribution to energy saving, low carbon emission, environmental protection, continuously pushes forward to the development of green renewable energy. We aim at quality, innovation, faithfulness, cooperation, mutual benefit and social accountability. Our eternal principle is to provide the superior, economic, safe, reliable technology and competitive products. We make every effort to “Green Energy” and “World Environment “and dedicate to create a better future for human beings.

All the products for "electric-electronic profile"

Surge Protective Device SPD DC

Plastic Solar junction box with solar cable connectors 1500V

Screw barrier terminal block connector

Surge Protective Device SPD AC

MCCB Moulded Case Circuit Breaker 4P

Website See all products

BMR GMBH

Germany

Rudolf M. Brittling founded BMR, which is based in Schwabach in Bavaria, in 1978. The initial focus of the business was on manufacturing products for Triumpf Adler office suppliers and the Lehmann-Eisenbahnen model railways. At the same time, the company set up its electronics manufacturing and developed its own electronic control systems. In 1988, BMR took over a big share of switch manufacturing at the Sasse group, providing itself with a second pillar of work. At this time, the production range included pump control systems for lubricating heavy good vehicles and battery chargers, for example. The incorporation of the frequency converter product area in 1990 was of crucial importance. Today, BMR GmbH is a specialist in the manufacture of static frequency converters for motor spindles in the power range of 100 VA to 3.5 kVA and for speeds of up to 150, 000 rpm and more, as well as for high and low voltage types. The company is the market leader in the low voltage range and serves customers not only in Germany and Europe but across the whole world.

Website
PEEKCHINA CO., LTD.

China

PEEKChina as a 15 years Chinese thermoplastic Polyetheretherketone manufacturer who is only focusing on PEEK material. Production of engineering plastic PEEK semi-finished and finished products. Materials can be Pure PEEK 1000, PEEK CF30, PEEK GF30 and PEEK MOD. For the semi-finished products, we cooperated with Jilin University and launched 15 lines of profile continuous extrusion production, which include PEEK Pipe, PEEK Sheet, PEEK Rod, PEEK Film, and PEEK Parts are both in machining process and injection molding. As well, we are researching with Xi’an Jiaotong University on PEEK 3D filaments and printers. From 2015, we became involved with long term implantable medical PEEK. Our medical PEEK has been certified by a lot of laboratories and colleges, it complies with ASTM F2026 and FDA/SGS certified, more and more medical device manufacturers and implantable material consumers choose us. As a Chinese top new material PEEK innovator, we spend 20% of our income on technical research. Our main customers are from USA, Europe, North America and Korea. ONLY IN PEEK, YOUR BEST CHOICE. ONLY IN PEEK, THE MOST PROFESSIONAL. CHINESE TOP SUPPLIER FOR PEEK PROFILES & PARTS.

All the products for "electric-electronic profile"

Polyetheretherketone (PEEK) Film for Electronics

PEEK Electronic Circuit Board

Website See all products
NOVELIS DEUTSCHLAND GMBH OHLER® - FLEXROHRE

Germany

Novelis is the leading manufacturer of flat-rolled aluminium products and the world's largest recycling company for aluminium. In close collaboration with our customers, we offer innovative solutions for manufacturers of drinks cans, automobiles and special products. Thanks to the global manufacturing and recycling capacities of our integrated network of modern roller and recycling facilities in North and South America, Europe and Asia, Novelis supplies consistently high-quality products all over the world. Our business activities focus on sustainability. This also influences our partnerships with stakeholders in the aluminium sector. The increasing use of lightweight, practical and always recyclable aluminium opens up new opportunities for us to help our customers to achieve their sustainability goals and to supply them with environmentally-friendly products in the expected quality.

All the products for "electric-electronic profile"

Novelis Advanz™ 6CM – s300

Novelis Advanz™ 6F – e170

Novelis Advanz™ 6HS – e600

Novelis Advanz™ 6HS – s600

Novelis Advanz™ 6HS – s615

Website See all products
BÜHNEN GMBH & CO. KG

Germany

BÜHNEN is a company whose success story stretches back to 1922. Our approach of presenting ourselves as a provider of hotmelt adhesives and devices with a comprehensive consultancy service has stood the test and is forward-looking. We then went on very early to focus on the connection technology of the future – adhesion. We support our customers with selecting devices and hotmelt adhesives, thereby laying the foundation for a successful and reliable bonding process. That applies both to the automated and to the manual application of hotmelt adhesives. In particular, our extended competence in hand-guided application technology is an important part of our range for many customers. These applications are used primarily when automated application is feasible only with difficulty or not feasible at all, due to complexity, spatial conditions or small quantities. This is exactly when it is important to have a partner by your side who contributes to secure adhesion through their knowledge. BÜHNEN is successful in Germany and the surrounding European markets, such as Poland, the Czech Republic, Austria, Slovakia, Hungary, the Netherlands and Belgium. All these aspects in combination with a highly modern product range and our 24-hour delivery service are the factors that make us a valuable partner for our customers.

All the products for "electric-electronic profile"

HB 20 BS Surface application head

HB 11 Micro application head

Website See all products
ROVIMEX BATTERY AND ENERGY TECHNOLOGIES

Turkey

Welcome to ROVIMEX BATTERY AND ENERGY TECHNOLOGIES, the premier destination for cutting-edge energy solutions tailored for electronics and the mobile phone sector in Turkey. At ROVIMEX, we lead the charge in battery and energy technology, boasting state-of-the-art production facilities and unwavering adherence to stringent international quality standards, including ISO, QC testing approval, and RoHS certification. Our products consistently surpass industry benchmarks, delivering unparalleled performance and reliability. Explore Our Product Categories: •Mobile Phone Batteries •Tablet Batteries •Rechargeable Batteries •High-Capacity Power Banks Backed by certifications like ISO, QC testing approval, and RoHS compliance, our commitment to quality is unwavering, ensuring that every product exceeds expectations and delivers exceptional performance. With a comprehensive 12-month warranty accompanying each purchase, you can trust in the reliability and durability of our offerings, providing you with peace of mind and confidence in your investment. Our cutting-edge lithium-ion polymer technology powers our batteries, delivering unmatched performance, longevity, and reliability, making them the ideal choice for your mobile devices. Our extensive portfolio of mobile batteries seamlessly integrates with leading brands such as iPhone, LG, Apple, Asus, Alcatel, Blackberry, Xiaomi, Samsung, and more, ensuring optimal compatibility and performance. Contact us for more !

All the products for "electric-electronic profile"

Qsuperior 861DE Hot Air Station 1200Watt

CD-2BQF Station Soldering Iron JBC

QSuperior 202D Soldering Iron with ESD Station

Rovimex3 Multifunctional Headlamp

Website See all products
MICROCONTROL GMBH & CO. KG - SYSTEMHAUS FÜR AUTOMATISIERUNG

Germany

For over 25 years, MicroControl has been a leader in CAN bus applications for industries such as mechanical engineering, automotive engineering and medical technology. We provide high-quality solutions for converting analogue data into digital data, support Industry 4.0 and provide custom-made hardware and software solutions. From "1.I/O modules" to training courses, we are your partner for innovative automation technology. Visit our website for more information. Our "µCAN modules" form the link for networking analogue and digital I/O signals via the CAN bus. They offer a wider temperature range, better resolution, a wider supply voltage and high degrees of protection. With our FDready system, we facilitate quicker data transmission rates without additional investments. 2. Controls Our µMIC.200 family offers forward-looking control technology for IoT gateways, small control systems and top-hat rail PCs. Easy to program with Node-RED or in C/C++, they provide a wide range of digital communication interfaces and are Industry 4.0-ready. 3. CANopen/CANopen FD and J1939 protocol stacks Our protocol stacks accelerate software development while providing security, increased speed and efficiency. Thanks to our modular system, they can be perfectly adapted to requirements. 4. Hardware and software advice and development 5. Training in BUS technology Our exclusive training offers include practical workshops.

Website See all products
KAMAT GMBH & CO. KG

Germany

Efficient high-pressure technology for the very highest demands – KAMAT is your expert for industrial high-pressure applications. Achieve maximum efficiency and quality in your industrial applications with KAMAT high-pressure technology. Our outstanding Triplex and Quintuplex high-pressure pumps, power units, complex pump systems and high-quality high-pressure accessories are the ideal solution for your jetting, hydraulic and process engineering requirements. Since 1974, KAMAT has stood for experience and expertise in the production of high-pressure technology – Made in Germany. We provide you with tailor-made solutions that can be adjusted to meet your individual needs. As a medium-sized, second-generation family company, we are proud to develop and produce tailor-made high-pressure solutions for the international market. Overcome your industrial challenges with our high-pressure technology at your side. Discover the impressive performance of KAMAT today and let us help you achieve your goals.

All the products for "electric-electronic profile"

High-Pressure Triplex Plunger Pump K25000-3G

High-Pressure Triplex Plunger Pump K18000-3G

Website See all products
SOLID SEMECS B.V.

Netherlands

Semecs, member of SERO Group, is specialized in the assembly of printed circuits boards on an industrial scale, from 5.000 to 500.000 pieces. Our products are mainly destined to the automotive, medical and industry markets. Based in the Netherlands, our company's production plant is located in Slovakia with subsidiaries in Germany and Denmark, enabling to serve our customers all around Europe. We are proud to be ISO 9001, ISO 14001 and ISO 45001 certified. Moreover, we are fully certified for PCB assembly in the Automotive market (IATF 16949) and the Medical market (ISO 13485) as well. We have also recently been rewarded with the ISO 27001 certificate. We strive to keep up with the highest quality standards, and carry out all necessary testing. We deliver a wide range of services, including product design and prototyping, manufacturing and distribution. We also deliver a comprehensive after-sales service to ensure our customers' satisfaction, which helps us to constantly improve. Our state-of-the-art production lines are organized to allow maximum flexibility. Because Semecs is member of the SERO Group, we can react quickly and ensure that your order is always arranged down to the last detail. Can you settle for PCB assembly? Or would you prefer Exceptional PCB assembly? Because there’s a world of difference between the two. If you require any further information, feel free to visit our site or contact us.

Website
SOOCHOW ADVANCE INDUSTRIES CO., LTD.

China

Soochow Advance Industries Co., Ltd., is a China-based provider of precision CNC engineering services. With sliding head multi-axis CNC lathes (Star, Citizen, Tsugami), we are capable of machining precision complex parts requiring turning, milling, drilling, tapping, broaching etc a single setup. Our CNC machining centers (Robdrill, Doosan, Haas) provide us with expanded capabilities. Our CNC processing facilities is complimented by a range of manual lathes with secondary metal processing capabilities including: threading, thread rolling, slotting, reaming, knurling, grinding, burnishing, shaving, trimming, laser marking etc. We specialize in manufacturing custom tight-tolerance electro mechanical parts & accessories, including OEM special parts, micro small parts, machinery parts, machine elements, non-standard fasteners, machine screws, bespoke bolts & nuts, customized pipe & tube fittings, inserts, studs, threaded rods, shafts, pins, stand-offs, spacers, bushings, specialty hardware, electronic hardware, hardware assemblies etc. Over these years, we have been exporting a wide range of cnc machined (turned, milled) parts & components regularly to many countries, say, USA, Germany, UK, Japan etc. Our machining quality has been well received by a lot of overseas customers. We are trying best to provide a cost effective supply solution for you. Welcome to our website www.sai-parts.com for more information.

All the products for "electric-electronic profile"

Knuckle Flanged Housing Car Parts

Locating Rod, Bespoke Mechanical Components

CNC Turned Brass Components

Special Machine Parts

Plastic Parts POM Bearing Bushing

Website See all products
SICHUAN ODOT AUTOMATION

China

As a national high-tech enterprise, ODOT is specializing in industrial communication product R&D, industrial automation control system design, integration and technical services since 2003. Our product has verification of EMC compliance "CE" BY SGS and Quality Management system ISO9001: 2015. We are also a member of PROFIBUS &PROFINET Association (PIChina), EtherCAT Technology Association, CC-Link, OPC, CCIA, Industrial Internet Alliance. In 2013, we built the first product is ODOT-DPM01, a modbus-rtu to Profibus-DP gateway and in response to market demands we have developed an all-encompassing automation data solution from Controller IIOT, Cloud to Sensors and Actuators to IO system and via the most popular fieldbuses and ETHERNET standards. ODOT Automation has successfully provided professional field data collection solutions for several industries such as Auto and New Energy, Textile, Automobile, Food and Beverages, Hydro power station etc. With our expertise the site real-time data could be smoothly transmitted to the upper-level management MES and ERP, so that the smart manufacturing could be implemented and the real-time data of MES could show the first-hand data of the production site. In 2021, Our first PLC based on Codesys was test successful, and in 2022 it will be ready in the market. We have built a long-term relationship and trust with our customers. We are always happy to provide value added services to beyond customer requirements and expections.

All the products for "electric-electronic profile"

CN-8021 CANopen IO network adapter

CN-8021 CANopen IO network adapter

Website See all products