Results for

Manufacturer Producer - Connectors for the automotive industry

43 Companies

3 Products

CVEP GMBH

Germany

CVEP GmbH is your systems supplier for all vehicle electrics components and electronic equipment. CVEP GmbH has been providing its customers comprehensive advice on several product areas since 2016, on the basis of the enterprise concept, thereby familiarising their customers with technologies and designs from the areas of OEM, suppliers and trade. The variety of products we offer as a manufacturer and distributor provides many advantages for customers and saves them time when carrying out time-consuming searches for new products for their applications. All our applications and developments satisfy the quality standards in the OEM application field. All of our suppliers are certified. As manufacturers, we develop and produce complex individually customised central electrical systems, with and without intelligent control units, as well as special relays and CAN I/O modules. For this we use our modular housings, which are splash-proof and water-tight according to IP67.

Website
INNOCOSO GMBH

Germany

The name Innocoso stands for "innovative connector solutions" – our customised connection solutions. But Innocoso GmbH is more than just a professional plug manufacturer. We consider our customers' wishes and problems as our own. With all our competences in the area of connectivity, we see recognising all potential difficulties as a priority and challenge. We provide a perfect fit solution – supporting you from the concept, design, simulation and testing to the final product. In addition to our standard products, our connector specialists will support and advise you when creating your tailored products in the closest collaboration with us. Our manufacturing facility is certified according to ISO 9001 and IATF 16949. Thanks to the modern and flexible production processes, we supply extremely high-quality and reliable products in a wide range of industrial and automotive areas.

Website
STANCMETAL

Serbia

Stancmetal was founded in 1993 with location in Sevojno, as partnership company for connector production (pads, fastons) for automotive industry and household appliances. Tools for serial production were constructed thanks to clear vision and big effort of the company. During the 90s, we made cooperation with few large state-own companies, which is shown in references herewith.After ten years of successful business, the company was pre-registered as limited liability company and extended its business scope by offering services and producing tools and stamping parts as per order. The production of machines for shaping and deformation of tubes is another activity within business activities of the company. High efficiency in production and quality of products are owed to good organization and multi-year experience in electrical industry. It should be emphasized that we work exclusively with high quality raw materials. The usage of high quality brass and steel strips, as well as the adequate construction of tools, help our products to meet the requirements of DIN standard and stay competitive on the market. Open and close cooperation with our business partners is the most successful way of doing business.As we use our products to make good electro contact, our motto supports the same idea: GOOD CONTACT!

See all products
IRISO ELECTRONICS EUROPE GMBH

Germany

IRISO Electronics is one of the leading producers of floating board to board connectors worldwide. As a global company with over 4000 employees, we have been developing and producing our range of high-quality connectors since 1966. IRISO connectors are highly regarded around the world. Thanks to their reliability, market demand for IRISO connectors continues to rise in sectors including digital devices, FA/OA devices and other areas. IRISO Electronics offers a wide range of high-quality connectors for the automotive and industrial sectors. Our range of connectors includes: FPC/FFC connectors, compression connectors, B-to-B connectors, LED connectors, socket connectors, pin header connectors, interface I/O connectors, optical fibre connectors and small terminal connectors.
VERPET S.R.O.

Czech Rep.

Established in 2011, Verpet stands as a leading force in wire harnessing and cable assembly, specifically tailored to industries such as automotive, agriculture, medical devices, and railways. Rooted in our sheltered workshop, Verpet s.r.o., we specialize in creating customized cooperation activities to address the unique needs of these crucial sectors. With three strategically located, state-of-the-art workshops, our skilled team of 150 professionals excels in manual machining, visual inspections, sorting, and the precise utilization of cutting-edge tools. Verpet takes pride in our unique selling proposition—delivering low-cost, high-quality, and customized solutions across all our services. Our commitment to excellence is certified through our ISO 9001 Certification, solidifying our position as a trusted partner for top-tier solutions and services. Join us in a legacy of precision, innovation, and industry-specific excellence across automotive, agriculture, medical devices, and railways. At Verpet, we understand the intricacies of wire harnessing in your sector, simplifying complexities and crafting tailored success stories for your unique industry needs.

Website See all products

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

SITEC INDUSTRIETECHNOLOGIE GMBH

Germany

As a system partner we develop, manufacture and supply customer-specific production technology worldwide as original equipment manufacturer. Our trademark includes flexible assembly systems, laser systems and systems for electrochemical metal processing for the automotive industry, electrical engineering/electronics, medical technology and alternative energy technology. For years, SITEC systems for the automotive industry have been used to fully automatically assemble and laser process high-pressure pumps, water pumps, oil pumps, shift forks, steering systems, camshaft adjusters, stators/inverters, piston rods and components for battery systems and fuel cells such as cell connectors, battery terminals or bipolar plates. In the field of medical technology, industry-compliant systems for the assembly and, in particular, laser micromachining of membranes, implants and surgical instruments are developed and built. In parallel to mechanical and plant engineering we have been producing assemblies and components for customers in the automotive industry in certified quality according to IATF 16949 for many years. Synergy effects result from our technological competence and tailor-made mechanical and plant engineering.

Website See all products
KOVINSKI IZDELKI HRAST CNC TURNING

Slovenia

Kovinski izdelki Hrast d.o.o. is a company that can be qualified as a development supplier. When it was founded in 1985, we were based in Borjana. Since 2012, we are based in Breginj due to our increasing activity. We manufacture and supply CNC turned parts and machined components. Our skilled workforce, our precise work, our experience and the high quality of our products explains how Kovinski became a leading provider of industrial solutions. Our customers come from different fields such as automotive, electro, white goods, hydraulic, pneumatic and machine building industries. We use a wide variety of materials : stainless steel, aluminium, carbon and hardened steel or brass for example. We are also specialized in plating, heat treatment and griding. We develop products based on customer specification. Our products include sensor housings, screws, pins, shafts and connectors. We follow the manufacturing of our products from raw material to finished components, which ensures traceability. We are proud to be certified ISO 14001: 2015, ISO 9001: 2015 and IATF 16949, which helped extending our presence on the international market. To comply to this norm, we use the latest measurement equipment and methods (contact or non-contact), including CMM measurement of complex geometries.

Website See all products
ERNST BRINCK & CO. GMBH

Germany

Tubular connectors and aluminium casting direct from the manufacturer We produce our tubular connectors exclusively from high-quality marine weatherproof aluminium alloys with low weight, maximum stability and natural corrosion resistance for a wide range of applications. We would be pleased to plan your individual tubular designs, prepare layout diagrams with parts lists and deliver our tubular connectors together with tube sections, which are marked and customised to your needs. Machine and safety railings from Brinck tubular connectors are TÜV type tested according to pr EN ISO 14122-3. You can also benefit from our experience in aluminium casting and as a system supplier. For over sixty years, we have been producing customer-specific aluminium cast parts as a reliable supplier to the automotive and machinery industries. From conceptualisation to implementation in finished assemblies, we offer you our all-round support.

Website
BDA CONNECTIVITY GMBH

Germany

For over 60 years, we have been manufacturing standard and special cables which are optimised for their field of application. A new addition is our product line of high-quality indoor antennae and passive components for the telecommunications market. The "CoMeT" measuring system developed by the company plays an important role in measuring the shielding effect of cables, connectors, bushings and distribution components. Our customers operate in the electrical and electronics industry, telecommunication networks, specialised electrical wholesale, the automotive supply industry, audio and studio technology, as well as the medicine and science sectors.

See all products
METZNER MASCHINENBAU GMBH

Germany

Metzner is an internationally active, medium-sized company and one of the leading manufacturers of cutting and finishing machines for rubber and plastic processing, as well as for processing cables, stranded wires and corrugated pipes. We have thus been an expert partner for a huge variety of sectors for many years. No matter whether it's the automotive/commercial vehicle industry, medical technology, cabinet construction or telecommunications. Since 2018, we have also been impressing customers with unique automation solutions for processing high-voltage cables and automated installation of HV connector systems through our subsidiary Metzner E-Mobility. We develop both series machinery and customer-specific systems in all product areas. We plan, develop and manufacture individual solutions according to customer wishes for all applications that go beyond the functions of standard machines. Thanks to our extensive experience as a mechanical engineer, we thus create sophisticated and application-appropriate solutions that are used under challenging conditions. Metzner takes on the entire development process here, from analysis and consultation, through conception and right up to successful delivery. We present you with a few customer-specific solutions and production lines on the following pages. Discover interesting starting points for your tasks!

See all products

LEONI DRAHT GMBH

Germany

Our LEONI Business Group Wire Products & Solutions is a leading supplier of highly advanced products and solutions made out of copper and LEONI Histral® alloys bare and plated, as well as composite materials. These are developed in close cooperation with customers for electrical components applications and the cable industry. Our versatile product portfolio includes a unique choice of wires, strands, ropes, heating conductors and wire solutions for automotive manufacturers and automotive suppliers. In addition we offer engineering services and innovative products for e-mobility as well as high power connectors and solutions for 48-volt systems, high voltage batteries, electric motors and for industrial applications. Apart from that, we have not forgotten our origins, despite all these modern, high-performance materials. We still produce traditional “Lyonese wares”, such as gold and silver-plated spun threads, bouillon and pearl wires for sumptuous embroidery and woven fabrics. Highly satisfied customer needs are the focus of all our actions. Our global sales and production network, consisting of locations in Europe, China and the USA, guarantees local consultation and support around the globe.

All the products for "connectors for the automotive industry"

Round copper braid made from copper and copper alloys

Flexible, braided copper tapes

Contured, braided copper tape

See all products
TRAS MM

Germany

TRAS MM specializes in R & D, production and sales of precision connectors (Aluminum Ingots, Lead Ingots, Zinc Ingots, Zamak Ingots, Copper Scraps, Copper Wire Scrap, Aluminum Scraps, Used shipping containers (Used 20ft shipping containers and Used 40ft shipping containers) etc. Its products are used in Automotive Industries, computers Industries, telecom network equipment, industrial apparatuses, etc. The Company is armed with advanced precision mold manufacturing equipment, high-speed hardware pressing equipment, precision plastic injection equipment, automatic assembly line and inspection/testing devices. The company adheres to the business principle of "technology for development and quality for existence", and provides customers with quality products and considerate service based on its years of experience in R & D, production and management, great technical strength and the mature quality management system. QUALITY AND BEST OF SERVICES IS OUR GOAL AND SO OUR CUSTOMERS IS OUR SOLE RESPONSIBILITY.

See all products

ALBS-ALLTRONIC BALTHASAR SCHMIDT

Germany

ALPS construction elements: Components for the audio, video, HF and industrial sector. The company was founded in 1977, selling semiconductor devices for industrial customers. We specialise in ALPS construction elements: Components for the audio, video, HF and industrial sector. albs proprietary products: Audio modules, DC/DC converters for the automotive sector, charging converters, sinus converters, PLC controls, special devices. albs plastic parts: Buttons and caps for electronics, automotive and white goods manufacturers, NEU in 1 and 2k technology, including laser marking, soft-touch varnishing, metallisation. albs imported parts: Wholesale business for sockets, connectors, etc. for the consumer goods industry.
EURO CABLETECHNICS KFT

Hungary

Manufacturer of confectioned cables, mounted wires, cables with connectors, complete cable lashes and cable harnesses (also known as wire harness, cable assembly, wiring assembly and wiring loom), for the automotive industry, aeronautics, construction and mining machineries, devices or equipments, automation, robotics, computers and IT, audio industry, household appliances etc… We deliver, even one cable harness, in 24 hours anywhere in Europe, 48 hours anywhere in the World. The company offers excellent quality at competitive prices! We are looking for customers who needs confectioned cable lashes or cable harnesses, mounted wires or cables with connectors, for their own use or trade companies to resell our products. We are also looking for cable harnesses manufacturing companies who need a subcontractor to produce their own products in our company´s facility. We are an AA ranked company by Bisnode, which means that the financial risk of a business relation with us is very low!
GREMCO GMBH

Germany

We are your contact for high-quality components for high-tech cabling: from heat-shrinkable sleeves and braided sleeving to heat protection, MIL cables and the appropriate insulation. As one of the leading manufacturers of heat-shrinkable tubing and insulating sleeves for the automotive, environmental and aviation industries, we have many years of experience in complete system solutions or custom-made products. Our product range includes protection solutions for cables, pipes, tubes and components against moisture, abrasion, heat or electrical impact. Heat shrink products for the low and medium voltage range. We have also been developing high-quality protective hoses, multi-chamber and multi-lumen hoses for our partners in the medical technology sector for many years. Contact us and we will find the right components for your high-tech cabling and the corresponding cable management. Our product range as manufacturer for you: - Heat shrinkable tubing FITCOTUBE® - FITCOFLEX® fabric hoses - Insulating hoses - PTFE Liners & Teflon® Hoses - ePTFE Membranes - expanded PTFE - Wires / Cables (MIL & UL cable and wire) - Heat protection for the automotive sector and other industries - Solder and crimp connectors - Processing equipment We have been successfully active on the market for over 30 years and serve customers from various industries. The flexibility in our production enables us to respond to special customer requirements.
HS UNITED EUROPEAN CONNECTORS GMBH & CO.KG

Germany

The Schatz Group has been active since 1981, with HSUEC GmbH & Co. KG, manufacturer of connectors, standard contacts and customer-specific punched parts for the electrical and automotive industry, and with Schatz GmbH, supplier of electromagnetic assemblies for various industry branches. With our high-performance equipment and tool manufacturing and injection mould construction, we have the option of supplementing our service range for internal and external requirements at any time. The Schatz Group also comprises businesses premises in the Czech Republic, in which we carry out installation of complete assemblies and work on partial solutions for customer-specific applications. The administrative centre for the group is located in Lauterhofen, near to Nuremberg. As a modern family business, we see ourselves as an innovative partner for our customers, including in an international context.
STRONG ENERGY COMPANY

Turkey

Established in 2018, Strong Energy is a mineral and synthetic oil for the automotive and industrial sectors manufacturer from Adana, Turkey. Our production area of 20.000 m2 with a 9.000 m2 factory base provides service to the mineral and synthetic oil industry with our fully equipped modern laboratory facilities continue to reach 100% customer satisfaction. We manufacture lubricants for various industries following national and international standards such as ISO 9001: 2015, OHSAS 18001: 2007, ISO / TS 16949: 2009, and ISO 14001: 2015 quality and environmental management systems. We precisely control the quality of our products produced in our quality control laboratory. We have a broad product portfolio: •Automotive Lubricants, •Heavy Duty Engine Oils, •Lubricants for Electric Vehicles, •Agricultural Lubricants, •Motorcycle Lubricants, •Gear & Transmission oils, •Automatic Transmission, •Hydraulic Systems, •Antifreeze & Cooling, •Greases Lubricants and many more can be discovered on our website! As Strong Energy, we produce private-label products and own brands such as Route Lubricants and Rush Lubricants for many international companies in the lubricant business. We strive to gain a rightful place in the international arena by exporting to 50 countries worldwide and increasing the number of countries exported. Please do not hesitate to contact us for more information!

All the products for "connectors for the automotive industry"

0W40 CI-4SL A3

0W20 SN/CF

See all products
MAROVT D.O.O.

Slovenia

MAROVT D.O.O is a company based in Slovenia specialized in forging, machining of forged parts and production of turning parts since 1971. We pride ourselves in being are the most technologically advanced forging production in Slovenia and one of the most advanced in Europe. We produce high-precision forged parts in our own machining plant. We provide our customers with a comprehensive range of services in short deadlines at competitive prices. Among our references we can count the most prestigious leading brands in the automotive industry such as Daimler-Mercedes, Audi Group, Volkswagen Group. We also collaborate with well-renowned companies of various sectors including aviation, nautic, medicine and the military. Our production is managed in accordance with the highest quality standard IATF 16949. We work with materials such as carbon steel, all types of alloy steels and mostly stainless steel. Our processes enable forging with extreme precision. The high level of automatization and digitalisation of our production enables us to operate with high flexibility to adapt to market changes. This is possible thanks to modern software and permanent investment into up-to-date technology, enabling to us to provide our customers with fast and appropriate solutions, thus meeting all their needs. Don't hesitate to contact us for more information !

Website See all products
NOVELIS DEUTSCHLAND GMBH OHLER® - FLEXROHRE

Germany

Novelis is the leading manufacturer of flat-rolled aluminium products and the world's largest recycling company for aluminium. In close collaboration with our customers, we offer innovative solutions for manufacturers of drinks cans, automobiles and special products. Thanks to the global manufacturing and recycling capacities of our integrated network of modern roller and recycling facilities in North and South America, Europe and Asia, Novelis supplies consistently high-quality products all over the world. Our business activities focus on sustainability. This also influences our partnerships with stakeholders in the aluminium sector. The increasing use of lightweight, practical and always recyclable aluminium opens up new opportunities for us to help our customers to achieve their sustainability goals and to supply them with environmentally-friendly products in the expected quality.

All the products for "connectors for the automotive industry"

Innovation

Website See all products
OPET LUBRICANTS

Turkey

OPET Lubricants since its foundation in 1966 with the name ROM, had always been an adaptive company and evolved to its current structure after the acquisitions by Opet Petrolcülük A.Ş. in 1996, one of the most important oil and gas distribution company, and KOÇ Holding in 2002, the only Fortune 500 company from Turkey. Koç Holding incorporates industrial giants such as Tüpraş, Ford Otosan, Tofaş-Fiat and Arçelik-Beko. Globally active in many industries, Koç Holding is Turkey's biggest exporter by achieving 10% of the total exports and %43 of total automotive industry export on its own. Opet Petrolcülük A.Ş. that has become one of the most steadily growing oil company in the last decade is engaged in retail sales, commercial and industrial fuels, lubricants, storage, and international trade. Increasing its market share and network of stations each day, Opet Petrolcülük has an extensive distribution network of 1, 615 stations together with Opet and Sunpet. OEM Collaborations: Opet Lubricants offers solutions for all needs of leading automotive manufacturers and also ranks as one of the most effective solution partner for the original equipment manufacturers such as Ford Otosan, Case &New Holland, Fiat and Otokar by offering first-fill and after-sales lubricants. Opet Lubricants also produces genuine lubricants such as FMY for Ford Otosan, Agromega, Megatran and Agrofriz for Case &New Holland, Spectra for Otokar and Opar Olio for Fiat, all to be sold as spare parts.

All the products for "connectors for the automotive industry"

FULLTECH 5W-30

FULLTECH 0W-30

FULLMAX RN 5W-30

FULLMAX 5W-30

FULLMAX LE 5W-30

Website See all products

BADE UND RINSCHEID METALLWARENFABRIK GMBH

Germany

We process belt and sheet material from 0.2 to 6 mm sheet thickness. We have invested in optimised machine units especially for processing aluminium strips, but not only for this purpose. Automatic punching presses, hydraulic presses and eccentric presses with pressing forces up to 3150 kN process belts/coils up to 600 mm wide. Tight dimensional tolerances, high flatness requirements and other technically demanding quality features are produced by us and partly controlled "in line". With our cleaning systems, which use organic, CHC-free cleaning agents in an environmentally friendly manner, we are also able to meet special cleanliness requirements – based on current standards for residual dirt identification. Through responsible management, we ensure that high quality standards – based on customer requirements – are achieved. Flat structures ensure careful, target-oriented and fast implementation of our customer orders.

Website
NEWSUN PV TECHNOLOGY CO.,LTD

China

NEWSUN PV TECHNOLOGY CO., LTD (NSPV) integrates design, development, production, sales as the modern management of enterprises. Product line includes PV solar system(connector, solar BIPV junction box, PV cable, installation accessories, controller, distribution box & combiner box, etc.); Protection system(earth-fault protection, diode connector, solar inline fuse connector, circuit breaker, etc.) and system optimization, which are mostly meet the standards of TUV, ETL, CE.Products cover the fields of PV system application, solar street light, solar hybrid street lighting and others, and Energy Performance Contracting (EPC). Solar energy has a great potential as a zero emission, zero consumption, and clean, safe, environmentally friendly, renewable energy. NSPV strives to make contribution to energy saving, low carbon emission, environmental protection, continuously pushes forward to the development of green renewable energy. We aim at quality, innovation, faithfulness, cooperation, mutual benefit and social accountability. Our eternal principle is to provide the superior, economic, safe, reliable technology and competitive products. We make every effort to “Green Energy” and “World Environment “and dedicate to create a better future for human beings.

All the products for "connectors for the automotive industry"

1500VDC Solar Fuse Connector Max.100A

1000VDC Solar Panel Mount Connector

1500VDC Solar Panel Mount Connector Long Type

1500VDC Solar Panel Mount Connector Standard Type

NSPV Factory Price TUV Solar Branch Connector 1500VDC 2 To 1

Website See all products
BIZLINK ROBOTIC SOLUTIONS GERMANY GMBH

Germany

LEONI protec cable systems GmbH – Business Unit Robotic Solutions: Business Unit Robotic Solutions offers our customers wide-ranging product and manufacturing expertise, superior system competency worldwide and a comprehensive portfolio. This includes robot cables and their manufacture, hoses, energy supply systems, robot function packages, robot programming, application training as well as image processing and measuring technology systems for the industrial robotics market. LEONI Special Cables GmbH – Business Unit Automation and Drives: The product portfolio of Business Unit Automation and Drives includes bus cables, industrial Ethernet and motion control cables, as well as innovative cable systems and services for automation and drive technology. The range is completed by our own connectors and customised drag chains. Cables for shipbuilding are also part of our product range.

Website See all products
SKS METAPLAST SCHEFFER-KLUTE GMBH

Germany

SKS metaplast: Your point of contact for construction plastics, extrusion & masks. With a global reputation as an innovative manufacturer of air pumps and mudguards for the bike market, SKS is now applying its expertise in the field of plastics processing to other sectors: The automotive, sanitary, home services, construction and electrical industries. Even in the early stages of each project, we see ourselves as a competent and active service partner to help customers optimise and achieve their objectives. From the initial concept, through construction, analysis of components, selection of materials, and manufacture of prototypes, to testing of components and quality control, we are a partner who knows its trade. SKS produces high quality plastic parts with the knowledge that they can be used to save energy and raw materials and make a contribution to a sustainable quality of life. Since 2020, SKS has also been producing reliable disposable face masks in Germany.

Website
MPI EUROPE GMBH

Germany

The MPI family of companies (Managed Programs and Performance Design) is a global product design, development and manufacturing company, supplying composite engine, automotive and marine components. We design and manufacture, among others, intake manifolds, valve covers and oil pans. MPI Europe also has many years of experience in e-mobility, medical technology and consumers. Our focus in Europe is components sensitive to warpage (e.g. coolant tanks, scoops) and complex assemblies (with 2K parts and kinematics, e.g. air-conditioning systems) We use our design expertise in prototypes and series production of plastic and carbon fibre components to offer high value to low- and medium-volume OEM, Tier 1, performance and motor racing customers. We offer European and American customers a convenient logistics concept with local tool sampling, part production and project management with technical communication in German or English.

Website
ÖZTUG ENDÜSTRI VE OTOMOTIV A.S.

Germany

Vision – we create our products with our lean production management on a global platform, by manufacturing small and medium-sized plastic, rubber and wire parts, plastic injection moulding, rubber vulcanisation and CNC wire-bending processes that our company performs in the industry for research and development plans, and which provide a high level of customer satisfaction. Mission – maximisation of our technology and design skills with regards to understanding overall quality and continual improvement, in order to lead the sector by providing unbeatably effective and efficient service. In an increasingly globalised world, to guarantee consistent satisfaction for all our stakeholders as one of the leading export companies in its field with the help of a streamlined waste-free strategy. Öztug works with the following sectors: Automotive industry. Aftermarkt. Aviation. Defence industry. Construction and furniture industry.Other industries. Tool manufacturing: Plastic injection moulding tools. Rubber tools. Metal tools. Test gauges. Welding equipment. Assembly equipment. Design and construction of special-purpose machines. Tool surface polishing. Research for improving customer satisfaction with value stream analysis ( VSM – Value Stream Map )

Website
EMBRO GMBH

Germany

EMBRO GmbH is a manufacturer of electrical heating elements and surface heating elements, silicone heating mats, heating fabrics as well as flexible heating foils and heating systems, textile sensors/RFID antennas/composite applications – carbon preforms/textile electrodes and innovative textiles. We are specialised in developing and producing technical textiles with the help of plaiting/embroidery machines. During this process, conductive threads, strands, wires or heating conductors are laid on substrate material by means of computer-controlled machines. They are then fixed in place with diverse sewing and embroidering techniques and offer a durable, highly flexible incorporation. Modern CAD workstations and corresponding capacities enable us to always react quickly and most flexibly. In addition to this, there is the consistent further development of materials and production technologies, as well as close cooperation with a wide range of external partners such as research institutes.

All the products for "connectors for the automotive industry"

Seat and Interior Heaters - Heating Elements

Heating Mats for e-Mobility

Plug-and-Play ready: Various contacts

Website See all products
ETH MESSTECHNIK GMBH

Germany

Welcome to ETH-messtechnik gmbh, your leading partner for precision torque sensors and custom measurement technology solutions. Since 1987, we have stood for outstanding quality, continuous innovation and a comprehensive range of products, including torque transducers, torque measuring equipment, torque testing systems, custom sensors, elastomer couplings and electric force sensors. Our strength lies not only in the wide range of standard products we offer, but also in our ability to develop custom solutions to meet the specific requirements of our customers. We work closely with our customers to create custom test facilities that meet the most stringent of demands. We have expertise in range of industries, including mechanical engineering, the automotive industry, test benches and robotics. Precision measurement of torque in industrial applications is crucial for ensuring productivity and performance. Advanced products are not all that we offer at ETH-messtechnik, we can also provide a comprehensive consultancy service. Our experienced staff will help you select the optimum torque sensor for your application. We rely on in-house production of mechanical and electronic components to ensure the highest quality standards. You can put your trust in our decades of experience, our modern production technologies, and our dedicated service.

All the products for "connectors for the automotive industry"

Torque sensor "DRFS ¼"

Website See all products
METAL TECHNOLOGY GROUP

Bulgaria

Metal Technology Group AD is a premier consolidator of three distinguished Bulgarian foundries—ALUCOM in Pleven, OSSAM in Lovech, and CENTROMET in Vratsa. Each entity brings its own specialized knowledge and innovative production technologies to our corporate family. Established in 1997, our group has evolved from individual foundries with rich histories to a unified force in the metallurgical sector, operating with over 560 skilled employees across our locations in Pleven, Lovech, Vratsa, and our head office in Sofia. Our commitment to excellence is reflected in our expansive reach across five continents and in serving customers in more than 25 countries, delivering high-quality castings to diverse industries including automotive, aerospace, and machinery. Understanding the critical needs of global supply chains, Metal Technology Group AD not only specializes in the production of high-quality castings but also offers comprehensive services that include packaging, logistics, and transport to ensure seamless delivery from our door to yours. Our approach emphasizes a hassle-free customer experience from initial order to final delivery, aiming to facilitate a straightforward and efficient procurement process. By choosing MTG, you partner with a company that values technological advancement, continuous improvement, and the cultivation of long-term relationships with clients, ensuring that we meet your project needs with precision and reliability.

All the products for "connectors for the automotive industry"

Cover

Bearing cup

Shield

Back shield

Front shield

Website See all products
F.EE GMBH AUTOMATION

Germany

Founded in 1982, the F.EE group currently employs about 1, 100 staff and is the German market leader in the field of production and automation technology. In addition to the head office in Neunburg vorm Wald, Bavaria, the company has branches in Frankfurt and Leipzig as well as international sites in China, Great Britain, Croatia, Mexico, Spain, Turkey and the USA. With its four business divisions of Electrotech Engineering, Automation Robotics, Informatics & Systems and Energy Technology, F.EE provides highly successful, made-to-measure solutions as well as products and services tailored to specific customer requirements in the fields of automation technology, robotics, switch cabinet construction, electrical engineering, informatics and industrial software. The corporate group is renowned worldwide for its best-practice automation and production solutions. In addition to the automotive and supply industry, F.EE's customers include medium-sized companies in a wide range of sectors as well as energy providers, municipalities and power plant operators.

Website