lubricated applications

GGB contributes to creating a world of movement with minimal friction loss through plain bearings and surface technologies. With research and development, testing and production facilities in the USA, Germany, France, Brazil, Slovakia, and China, GGB works closely with customers worldwide on customized tribological design solutions that are efficient and environmentally friendly. GGB's engineers s...

...The small electric winch SW-E has been specifically designed for construction site use and for installations in industry and crafts. It can be carried on connecting rods and easily screwed in anywhere there is a solid, flat foundation. The installation position does not matter! The rope payout can occur in any direction. The permanently lubricated, self-locking worm gear (SW-E 05) acts as a reliable brake for lifting and pulling loads. The standard motor can be easily replaced in case of repair.

... coupling and is designed for applications requiring continuous operation. * Suitable for flow rates up to 30 m³/h * Standardly equipped with a suction basket * A suction pipe extension of up to 2000 mm is possible * Available in immersion depths of 500 - 4000 mm Features & Benefits * No medium-contacting screws * Vibration and oscillation-free operation * High service life and operational reliability * Lifetime grease-lubricated rolling bearings * Independent bearing of motor and pump * External flushing to protect the sliding bearings when handling media containing solids...

...ELKALUB LFC 4160 PH is a highly effective, corrosion-protective, and adhesive synthetic oil with a wide temperature range suitable for both cold and high-temperature applications. A special additive makes ELKALUB LFC 4160 PH more resistant to water than pure oil. The high creep ability of ELKALUB LFC 4160 PH ensures that wear-prone internal friction surfaces are well wetted and lubricated...

...The "original" quiet compressor with a noise level below 45 dB(A), JUN-AIR’s oil-lubricated compressors are the lifeline of dental surgeries worldwide, and many units are still operating after 25 years - a testament to the quality and reliability of JUN-AIR compressors. With their unique design and modern technology, they are being implemented in an increasing number of applications, including laboratories, dispensing systems, graphics, health care, door opening devices and fitness equipment.

... bearing systems for medium loads. The bearings are self-lubricating and can be used dry. If required the bearings can also be lubricated. The material iglidur® M250 is resistant to all common lubricants. The iglidur® clip bearings are the ideal solution for bearing functions with low loads. The easy mounting makes it ideal for applications with difficult bearing locations. Compressive strength...

... Balancing™ technology * - Maximum operational safety through monitoring of operating data Technology: Turbomolecular Lubrication: lubricated Number of Stages: single-stage Application: Industry, for gas Additional Features: compact, high-performance, air-cooled, water-cooled, ball bearings...

...-in for 6 mm tube  Kv-value:3.5 l/min Size:22 mm Duty cycle:100 % ED Medium:Water and filtered (5 µm), lubricated and non lubricated air  Nominal power:4.6 W Nominal voltage:24 V DC Nominal current:250 mA Returning mechanism:Spring  Ambient temperature:0 … + 55 °C Materials:Housing: PPSU, sealing: either EPDM, NBR or FKM  Valve type:Poppet valve ...

... done by means of a single-acting, internal mechanical seal which is lubricated by the mixing product or an additional fluid The agitator shaft is connected to the drive directly with a flange coupling inside the seal housing. By default, this agitator series is supplied with marine type propellers. Other mixing elements according to the mixing task upon request. Solutions correspond to those of the SPR, additionally mechanical seal in sealing housing. Other solutions for this series upon request.

... corrosion protection and good chemical resistance. They can be used in applications with water and at high temperatures. B7 = maximum value for links. Pitch = PxB1 Reference:22213 Material:Stainless steel 1.4301 Version:Pre-stretched Temperature range:-20°C to +400°C...

...The design of the Dyna Gear Economy range has been infl uenced by extremely varied applications within many industry sectors. The Dyna Gear Economy range has been developed with a dynamic servo drive solution in mind and therefore benefits from many advantages. Right angle gearbox, single-stage, ratios 5:1, 8:1, 10:1 and 15:1. The compact and rigid design ensures highest performance whilst being space and weight efficient. Lubricated for life, the gearboxes are virtually maintenance-free (when used under normal conditions). The high efficiency rating of up to 96% saves energy costs.

... life with extra-abrasive aggregates, with quick and easy replacement - Patented triple shaft seals act as one-way valve, with less grease use and no mix contamination - All gearboxes CNC manufactured in-house - Oil-bath lubricated gearboxes and bearings reduces maintenance ** Click to read more **...

...°. Available with double-row ball bearings for high load capacities: Available sizes: 18, 28, 43 Roller pins lifetime lubricated: Rolling seal: 2RS (splash-proof) Long service life due to hardened raceways: Self-aligning systems in two planes: axially up to 3.9 mm, radially up to ±2°...

... mm, endlessly connectable Material:Cassette plate, roller shoes Rail body:aluminum, anodized Raceways:NIRO steel Rollers:NIRO steel Operating temperature:-10 °C to +80 °C Maximum speed:10 m/s Maximum acceleration:40 m/s2 Mounting position:Any Lubrication:Lifetime-lubricated, maintenance-free...

...Wrapped composite sliding bearing steel / Special PTFE coated Maintenance-free dry sliding bearing | DIN 1494 / ISO 3547 TEF-MET/P is a versatile dry sliding bearing with PTFE sliding layer. Therefore, no lubrication is necessary. However, it is very well suited for lubricated applications (e.g. hydraulic oil lubrication). For technical details, please visit the product page on our website...

...This grinder, with its multi-disc motor, has a unique and patented oil-free drive. As with turbo drives, the machine needs no lubrication and is nevertheless slim and handy. It has the same durability of lubricated multi-disc motors. A double row of bearings means that this grinder is even suited to extreme applications. Operation:pneumatic Other characteristics:straight,rear exhaust...

...The EP®79 thermoplastic plain bearing offers excellent resistance to erosion, cavitation, and corrosion in humid or saline environments. With a very good performance-to-weight ratio, the EP®79 thermoplastic plain bearing provides outstanding performance in lubricated applications and has excellent dimensional stability. Compliant with European directives EVL, WEEE, and RoHS, this self-lubricating bearing is available in all dimensions and shapes, within the limits of injection molding techniques. Contact GGB to learn more and get a free quote!

... no restrictions. Reel mounted on two permanently lubricated and sealed ball bearings to reduce the torque load on the spring for smooth retraction and a longer lifespan. Large effective radial locking for easier operation. Outlet with six roller guides prevents the hose from kinking and reduces friction. Installation options: Tank, floor, ceiling, wall Fluid outlet: 1/4" BSP (M) Working pressure: 5075 psi, 350 bar, 350 bar Fluid inlet: 1/4" BSP (M) Hose length: 10 m (32.81 ft) Hose diameter: 1/4"...

...Compressed Air Hose Compressed air hose / pressure air hose, suitable for lubricated compressed air as well as service water in heavy-duty applications. Operating pressure: 20 bar Burst pressure: 80 bar Temperature range: from -30°C to +80°C Inner core: SBR/NR, black, smooth Outer cover: SBR/NR, yellow, fabric-patterned, weather-resistant...

...Our line of turbine pneumatic vibrators consists of twelve different variants of devices to meet all possible applications in the industry. This line is particularly suitable when high vibration frequencies are required. Additionally, turbine vibrators do not require the supply of lubricated air during their operation, making them the ideal choice in sterile fields such as the food industry.

...TECASINT 6062 is a highly filled grade for direct forming parts with low static friction. For lubricated and unlubricated tribological applications...

... addition to our standard program, we also offer the production of tension rollers according to drawings. Materials and bearings can be coordinated together. Applications: - Adjustment of the pre-tensioning of belt drives - Deflection of belts in multi-disc drives - Prevention of vibrations in the belt drive through tangential contact of the rollers on the belt back (recommended back fabric PAR for the belt)...

...Strapping machine. Controlled by: pedal, button, sensor. Ejection of the formed strap in empty mode, automatic placement of the strap in the arch, automatic reintroduction of the strap in case of failure, lifetime lubricated mechanics. Applications: Cardboard, box, case, etc... Production 26 pieces/min Power supply voltage 230 V - 1 Ph - 50 Hz Installed power 0.9 KW Machine dimensions L x W x H...

... 140ºC and providing ideal characteristics to accelerate the curing times of white glue (PVAc), PU, and UF adhesives. To provide a high level of detail in PVC lamination, the vacuum press is equipped with a powerful oil-lubricated vacuum pump that achieves a higher vacuum pressure than oil-free vacuum pumps. The PLC automation system, operated via a touchscreen, comes with 3 production modes: hot pressing, cold pressing, and PVC coating.

...BALL GREASE NIPPLE ACCORDING TO DIN STANDARD 3402 VARIOUS APPLICATIONS The ball grease nipple is suitable for all standard lubrication points that need to be lubricated frequently and reliably. They are often replaced today by the cone grease nipple according to DIN standard 71412 due to their high multifunctionality in various domains. TYPES In general, our ball grease nipples are manufactured...

...The bearing is also available in stainless steel with an SS finish. There are 3 possible options: by set screw UC and SB, eccentric ring SA, and by clamping sleeve type UK+H.... The primary applications are in agricultural machinery, construction equipment, conveyors, packaging machines, etc. These bearings do not support any axial displacement. All bearings are sealed and lubricated with grease (from -30°C to +100°C). For extreme series, triple sealing is possible with KPPB 3.

...Flow H Max kW 0.6 to 118 6.5 to 275 0.75 to 45.00 mc/h m kW Execution Vertical multistage pumps with suction and discharge connections of the same diameter and arranged on the same axis (in-line). Corrosion-resistant bearings lubricated by the pumped liquid. Pump with a thrust bearing and coupling sleeve allowing the use of any standard motor of type IM V1. Applications For water supply systems...

...Classic applications for this pump are industrial cleaning, blasting and process engineering. SPECIAL FEATURES - Capacity data at 100% volumetric efficiency and 20°C ambient temperature - Minimum inlet pressures depending on pumped liquid - Speed range 10-100% depending on rod force - Dynamically balanced gearbox - Splash lubricated gearbox - Standard gear ratios i = 3,00 - 3,14 - 3,39 - 3,76...

...Sliding layer made of a mixture of PTFE and polymer fibers (approximately 0.01 to 0.03 mm thick), porous layer made of sintered bronze, carrier plate made of steel, corrosion protection layer made of tin • RoHS compliant • suitable for dry and oil-lubricated applications • very good bearing performance in oil-lubricated, hydraulic high-performance applications • particularly well-suited for intermittent operation (lifting and swiveling movements) • low water absorption and reduced swelling • improved wear and friction properties in lubricated applications compared to GGT50...

... mt Power: 0.55 – 2.2 Kw Motor cover, motor housing, pump body, impeller: cast iron G20 Motor shaft: stainless steel Aisi 420 Electric cable: 10 mt in H07RN-F Asynchronous, 2 poles, lubricated with non-toxic oil, insulation class F, protection degree IP68 Flow rates: 0 – 975 lt/min Head: 0 – 19 mt Power: 0.55 – 2.2 Kw Motor shaft: stainless steel Aisi 420 Electric cable: 10 mt in H07RN-F...