load indicator

...NEW SERIES OF PALLET TRUCK SCALES FP LOGISTIC ORTO 680 Weighing pallet truck suitable for the fruit and vegetable sector for handling and lifting wide pallets, with 680 mm wide forks. It is built in very thick steel with oven painting and is equipped with guide wheels and double loading wheels in polyurethane. It is supplied complete with weight indicator with waterproof STAINLESS STEEL casing...

... Class I, II, III Div. 1) LCD weight display (20 mm, 14 segments, 7 digits) with status information, backlighting Stainless steel housing, IP69K Scale connection for analog Ex platforms, e.g., Combics Ex, IU Ex, IF Ex, or Ex load cells. Also optionally available are digital IS scales (xBPI) Internal alibi memory Serial interface RS232 485 422 Various power supplies and batteries available Fieldbus Profibus DP and 4 ... 20 mA interface Display: LCD display Additional features: Stainless steel...

... suitable for all types of strain gauge sensors, whether it be a load cell, a load measuring pin, or a reaction torque sensor. The internal amplifier can handle a signal range of ±0.3 ... 5 mV/V. The Portable Display is very flexible and meets the highest specifications regarding accuracy (0.01%) and measurement frequency (1600/s). It allows for the storage of up to 16 programmable measurement ranges...

...-weight, liquid filling, batching, vessel and silo weighing, etc. Different configuration choices, a variety of combinations； Standard: ① 4-channel of 6-wire load cell interfaces; ② RS485&RS232; ③ 4 Input 8 Output transistor I/O; Option1: Modbus TCP /IP or EtherNet/IP or ProfiNet or EtherCat; Option2: 4 analog output; Option3: 1CAN interface; (Option1,2,3 can be selected at the same time) ...

... switch, the higher the speed of the impact wrench. Once release the switch, the tool stops immediately, providing more security. Fast Charger&Power Indicator: Rechargeable 20V 4000mAh Li-Ion lithium-ion battery pack allows the tool to work longer. Power Indicator reminds charger in time. Fully charged in only 1 hour with the matched Platinum Tools fast charger. Features: Compact and powerful with...

...Product line for load moment monitoring according to DIN EN 15000, EN 474, and EN 280 with safety level PLd. Display, control electronics, and sensors are designed redundantly. Safety device for all types of vehicles with extendable load booms. Effectively prevents tipping due to excessive load moments. Highest sensitivity, accuracy, and temperature neutrality. Suitable for heavy-duty environments. Standard-compliant measurement, display, and hydraulic shutdown according to Performance Level D. Direct integration into CAN bus systems with flexible configuration.

... of the force agrees as exactly as possible with the geometrical axis of the load cell that is to be measured (central loading). Measurement accuracy:< ± 0.001 % F.S. Sample rate:0.1 ... 1200/s (DC); 0.1 ... 2/s (AC) Type of sensor:Strain gauge Interfaces:USB 2.0 Indicator:± 9,999 + 3 dig. unit Sensor excitation: Strain gauge::DC: 2.5 V / 5 V (at 120 Ω only 2.5 V) Protection class:IP40 Supply...

... indicator has the advantage of allowing easy monitoring of the liquid level in the tank during refueling. We also provide versions of single fixing plates and fixing plates for electronic level indicators or to connect flexible fuel loading hoses of various diameters. The careful selection of raw materials and the adoption of rigorous production processes contribute to ensuring the quality and reliability of our product over time.

...Top-of-floor or on table weighing platforms and units of weighing platform and weight indicator with column. Dibal MA single load cell weighing platforms, for top-of-floor or on table installation, offer a great precision for weighing applications with small and medium range (from 30 kg to 600 kg). Its stainless steel plate assures its strength and durability. These platforms can be connected...

...For all CSN® heaters and heating systems we manufacture perfectly matching process controllers. Please contact us to talk about the appropriate control options. CSN® standard contactor controls consist of Enclosure Main switch Load protection Control protection Step protection Indicator light In economical heating systems the load is controlled by thyristors, thus ensuring an accurately dosed...

... quality. Choose between two different transmitter types: the ABURemote Button handheld transmitter and the ABURemote Joystick master switch transmitter. Control frequency-regulated drives with the two-stage buttons or master switches. Accelerate or decelerate to the desired speed and maintain it comfortably. The illuminated display provides information on selected settings, active cranes and trolleys, the strength of the radio signal, and the battery status. And of course, you can see if a load indicator system (LIS-SV)...

...The visual inspection of electrical systems is important for identifying a variety of issues including loose connections, corroded components, load imbalances, short circuits, and other potentially hazardous failures that typically generate heat. Overheating caused by high resistance or excessive current is the primary indicator of many problems in electrical installations. Thermal imaging allows for the visualization of thermal radiation and enables corrective action before the issue escalates into a system malfunction or a safety hazard.

...adjustable range: -31000 to +31000 Accuracy:depends on input, see data sheet Output:2 alarm relays SPST, max. load 3 A / 250 V AC and 3A / 30 V DC; Optional: Analogue 0 or 4...20 mA ou Measuring rate:(15 s for the 0…50 mV, 4…20 mA, 0…5 V and 0…10 V input types) A/D converter resolution:128000 levels, display: 62000 levels Power supply:100...240 V AC ± 10%, 50…60 Hz Display:1-row, 5-digit LED...

... play of the trapezoidal screw nut. These tables can be mounted at just one end thanks to a reinforced base, suitable for vertical or offset applications. The shaft output is threaded to attach the handwheel or knurled knob with or without a position indicator. The maximum achievable stroke is 400 mm (load recovery by the upper plate recommended for strokes > 300 mm), and any intermediate non-standard stroke can be realized. Model: 309E and 309N Screw diameter x pitch: Ø10x2 to Ø16x4 Guiding column diameter: Ø12 to Ø25 Strokes: 0 to 300 mm Maximum load capacity: 1 to 23 kg...

...Mobile test device for detection of the maximum torque (drag indicator mode) and for the detection of the power range (constant load) of motors in dental and dental surgical application area. arbitrary loading curves endurance test speed ​​measurement in aluminum case permanently installed Calibration disc and calibration will be in the trunk.

...max 1.6 times the capacity. With simple zero setting and tare function. Font size: 12 mm for all scales. Storage case can be supplied as an option. Safety: At least five times the nominal load. Zero tare. Font size for all scales: 12 mm. Storage case (optional) can be supplied. Model: KPZ 3 Capacity: various. Packaging dimensions: from 55 x 36 x 12 cm, from 6.5 kg...

...The Golstein Aslast Indicator is a simple system for signaling axle load overload. The system measures the bellows pressure or deflection on both the left and right sides and converts this into an axle load. When a preset value (for example, 80% of the permitted axle load) is reached, the LED indicator changes from green to orange. As the maximum permitted axle load is approached, the LEDs change from orange to red. Additionally, an optional buzzer can be added for an extra audible signal.

...Construction stainless steel 304 L. Electric cart with batteries 2 x (12 V – 20 Ah) + charge indicator. Mini charger 24 V 4 Amp 4 non-marking handling wheels, including 2 swivel wheels with brakes Ø 125 mm at the back, and 2 fixed Ø 80 at the front, as standard. Control box for lifting/lowering on a flexible cord. Protection class IP 65. Capacity rated for a load at 600 mm from the mast. Lifting...

... where the binding will be closed. A productive, effortless, and safe electric binder. Safety features: 2 push buttons located on each side of the machine to be activated with both hands – no risk of injury; automatic reverse of the binding cycle when the user removes their hands too quickly from both activation buttons. Indicator lights showing the stage of the binding cycle. Binding holding system...

... weight indicator, making it easy to read in all working conditions. Other models are available for food, commercial, or medical use and for explosive environments. Compliance CE Certificate Manufactured in accordance with the requirements of ISO 9001 standard Product complies with standards 2006/42/EU (Machinery Directive), EN 13155, EN 13889, EN 61010-1, EN 61000-6-2, EN 61000-6-4, EN 61326-1, EN 55011 SKU: 6697 Capacity: 2000 kg Capacity of each sensor: 1000 kg Additional information: CUSTOM MADE, REQUEST ADVICE...

...Specifications OIML R76: 2006 Type Approval Certified Wide-angle 51mm high LCD screen (with backlight) Easy to install design High speed 24 bit Delta Sigma-Analog Digital converter Programmable two-stage Capacity Kg / Lb unit conversion Counting pieces Checkweighing HI-OK-LO Live animal weighing Rechargeable internal battery Battery status indicator Connecting 8 pieces 350Ohm load...

...Features: Floor platform with 4 load sensors. Embedded installation on the ground (*). Very sturdy sandwich-type structure, with epoxy treatment. OIML R-60 class C load cells in nickel-plated steel, IP67 protection. ABS box with IP66 protection. Adjustable height feet to adapt to the surface of use. With RX indicator, LED display, and a 400 cm long cable. (*) Except for models 88 and 1010.

...BAYKON BX2nD / BX3nD / BX6nD digital LC indicator / terminal series designed for use with Baykon brand digital load cells. They are provides the industry's highest accuracy and reliable weighing in tough industrial environments. All models have European/OIML R60 Class III approval. The digital system; eliminate possible errors which can occur with standard analogue load cell scales such as...

... Optional ramps facilitate loading and unloading Shielded cable approximately 5 meters / 15 feet CE certified LCD weight display model GK An affordable weighing indicator with a full keypad and smart functions, the GK offers a user-friendly interface for quick operation. The GK housing is made of ABS plastic and features a backlit LCD screen with large digits and a capacity tracker. The GK weight indicator comes with a stand...

...White ABS soap dispenser AITANA Liquid soap dosing device with a transparent reservoir, level indicator allowing complete control of the soap load. An anti-corrosion and anti-drip valve is located in the push button.

...The wireless model can be controlled and operated from a handheld indicator.\n\nIt features a robust structure, 0.1% accuracy, and options for alkaline batteries or rechargeable batteries.\n\nCommonly used measurement units worldwide include kilograms (kg), tons (t), pounds (lb), newtons (N), and kilonewtons (kN), with capacities ranging from 1 ton to 500 tons.\n\nApplications:\n- Strain tests\n- Tensile tests\n- Force tests\n- Mining\n- Transportation & Logistics\n- Shipyards\n- Construction\n- Port Logistics"}...

...The small dimensions of the hydraulic force transducers of the model series TesT 1001 / 1011 / 1021 as well as the flat building method permit versatile applications. The small transducers were conceived for occasional control measurements, e.g. for adjusting or service work. The indicating instruments of model versions 1001 and 1011 have a diameter of 63 mm. The indicating instrument of model version 1021 can have a diameter of 63 mm or 100 mm. All model versions possess a drag indicator to display peak values. ...

...Hydraulic load cells of the HMD series are robust measuring instruments that gauge axial compressive forces with median accuracy. The force is transferred by pressure pistons analogously and via the hydraulic fluid to a manometer with a kN-indicator scale. The measuring system is autarkic so there is no need for external or supplemental power. Therefore, static and dynamic forces can be...

...Cyclic pulse generator/timer for 8 or 16 outputs (24V, load capacity 1A), with indicator lights, with 'Start/Stop' input, for 24VDC supply, optional IP65 ABS housing.

... potentiometer to adjust the output voltage ±10% for long cables. The output side tolerates continuous short circuits and prolonged no-load conditions. Product features to your advantage DIN rail mounting (DIN EN 50022). Encapsulated for installation in control cabinets. Front-side screw terminal blocks. Ambient temperature 0°C to +60°C. Self-cooling through natural convection. Protection class IP 00, protection class 1. Operating indicator via LED. Automatic shutdown at internal temperature >135°C.