heat exchanger Italy

...Finned tube heat exchangers [FTHE] have tubes with transverse fins to enhance exchange efficiency by increasing the effective heat transfer area between the tubes and the surrounding fluid, which is usually a gas such as air or process gas, while gases, water, steam, or oil can flow inside the tubes.

...Before releasing the clean hot air into the atmosphere, any residual heat can be further recovered by installing a heat exchanger. This allows the plant to produce hot air, thermal oil, or steam based on the quantity and calorific value of the pollutants. The recuperative thermal oxidation process is particularly advantageous when the energy from the clean, hot gases exiting the plant can be recovered and directly integrated with the services of the client company.

... / ploughshare with toothed design / Mix Paddle / Mix Paddle with toothed design • Material of costruction: carbon steel / Hardox 450 / AISI 304 / AISI 316 / AISI 316Ti • Inspection door complete with safety electric lock • Discharge door with round profile, building the bottom side of the mixing chamber • Rotor shaft with turned and coaxial ends • Rotor shaft sealing system with packing seals and wear resistant ferrules to protect the rotor shaft, prepared for flushing with air / nitrogen • Heat exchanger on mixing chamber for heating / cooling processes...

... heat exchanger and cools down as the (colder) ambient air touches the surface of the heat exchanger. The fins serve to increase the total heat exchange surface area, allowing the device to be built as compact and efficient as possible.

... sized heat exchanger 4 stabilizers for leveling the drilling rig Control panel located in the rear part of the drilling machine Triple borehole pump: max flow rate 80 lt / 1 ', pressure up to 40 bar Overhauled and repainted Price upon request Producer:CLIVIO Template:RAP 0 Condition:Refurbished Stock number:WY22498 Guy:drilling rig...

... is the only tubular heat exchanger for the homogeneous cooling or heating of grape mash (with or without stalks), fruit pulp and other products containing suspended solids or fibres (up to 25-30%). It is therefore ideal for: • in-line chilling of white grape mash at 15°C, to prevent fermentation before pressing • instantaneous chilling of black grape mash at 25°C • black grape mash fermentation control by means of by-pass circulation. Made entirely in AISI 304 stainless steel Supplied on request with effective insulation by injected expanded polyurethane and a stainless steel cover...

...The heat exchanger is a component in which an exchange of thermal energy takes place between two fluids at different temperatures. In general, exchangers are open systems that operate without exchange of work, i.e. they present a constant flow of matter and a constant temperature distribution in steady state conditions. For this sector, our company deals with the production and sale of copper and...

...Commercial coffee machine, boiler and copper pipes, heat exchanger system or multi-boiler, heavy-duty E61 group head, digital temperature control and management (PID), graphic LCD display, LED on the sides and back, solid wood finishes, leather sides.

...IT IS A FULLY AUTOMATIC MACHINE MADE OF AISI 304 STAINLESS STEEL, WITH A LOADING BELT TO FACILITATE THE ENTRY OF THE PRODUCT AND A DRAINAGE BELT FOR COLLECTING AND CHANNELING THE OUTGOING PRODUCT. IT REQUIRES A STEAM GENERATOR. THE PRODUCT IS LOADED ONTO THE LOADING BELT, WHICH CONSTANTLY FEEDS THE BATH OF THE BLANCHER. THIS HEATS UP RAPIDLY THANKS TO A HIGH-EFFICIENCY HEAT EXCHANGER WITH MINIMAL...

...CE CERTIFICATION NO. 97/23/EC – The heat exchangers are designed, manufactured, and tested according to the European directive 97/23/EC, which regulates pressure equipment (PED). DATA PLATE – Each exchanger is equipped with a "data plate" containing its relevant characteristics; it is important to keep it for future traceability of the equipment.

...The rotating rack oven is a convection oven with forced air circulation. The rotor is a rear oven designed to minimize overall dimensions, with the burner and heat exchanger located at the back. Its versatile nature makes it suitable for producing various types of bread and pastry products, both small and medium-sized. The balanced inflow of hot air, combined with the rotation of the rack and a...

... additives after the fluid replacement. ATF Super has automatic flow recognition, so the operator does not have to worry about the direction of rotation of the oil during the oil change phase and does not have to manually reverse the hose connection. This avoids wasting time - risk of damaging the gearbox and unnecessarily leaching the floor or the operator himself. Thanks to an extensive list of metal connectors, ATF Super is able to guarantee thorough cleaning of the heat exchanger, removing all dirt (not all machines on the market are able to do this).

...The AP-Max air heater is a hot water heating system designed specifically for large spaces. The outer structure is made of polypropylene, a lightweight and chemical-resistant material, making it suitable for all environments. The heat exchanger, on the other hand, consists of copper tubes and aluminum fins, which are easy to clean and maintain. The choice of materials and the cataphoresis painting treatment of the heat exchanger make the AP-Max suitable for use in any environment, as they are resistant to corrosion and acids, and are easy to sanitize and dispose of.

...The water demineralizing Plants eliminate all the salts contained in it. Water obtained by this process, meets the needs of hospitals, chemical processing, power plants etc. They are essentially constituted by a heat exchanger containing the cationic resins and a heat exchanger containing the anionic resins. The heat exchangers can be made in: - fiberglass - Ebonized steel - Acid-resistant steel...

... stroke of the hydraulic cylinder is 500mm, while the gap between the two working tables is 600mm. The MST electro-hydraulic press is equipped with a hydraulic power unit with monitored Rexroth solenoid valves. Other standard features include the following: – Siemens CPU for setting dimensions – Cylinder adjustment with limit sensors – Automatic movement controls using dual buttons – Air/oil heat exchanger – Pressure switch – Rear protective metal mesh.

... electronic cam burners, they offer modulation from 10% to 100%, reducing waste and costs by up to 15% annually. Standard equipment includes: - Burner power interruption thermostat - Water/steam side pressure switch - Steam/smoke side block thermostat - INAIL approved safety valve - Water side level switch - Water-steam inlet heat exchanger Electrical panels equipped with PLC and 4.0 Ready touch HMI panel that allow for easy visualization and modification of all machine parameters at any time.

...using R404 as the refrigerant. – Plate heat exchanger model, mounted on a robust AISI 304 stainless steel frame. – It has the following thermal cycle: 4-40-70-82-52-16-4; – Cooling chiller – Centrifugal pump for milk – Pump for hot water circuit – Milk delivery pump for packaging – Homogenizer – Constant level barrel of 100 liters – Flow meter – Separator cleaner and skimmer – Compressor for compressed air of 30 liters – 2 autonomous cooling tanks for storing pasteurized milk of 300 liters each.

... MODEL ES150T – CAPACITY 26 MC – EVERY MODEL HAS A BURNER THAT CAN BE DIESEL, LPG, OR NATURAL GAS – CAN HAVE A DIRECT FLAME OR A HEAT EXCHANGER – PTO DRIVE, ELECTRIC DRIVE, OR DUAL – LOADING AUGER OR TRAY – STAINLESS STEEL PANELLING – ELECTRIC CONTROL PANEL – TANK FOR DIESEL – DUST COLLECTOR WITH CYCLONE AND MANY OTHER OPTIONS.

CO.ME.S is an expert in the design and production of high-quality tanks, heat exchangers, and reactors. Over the years, it has honed its craft and today is capable of producing a wide range of products that meet the specific needs of customers. From small heat exchanger constructions to large evaporators and distillation columns, CO.ME.S has the experience and expertise to deliver top-notch...

... of plate heat exchangers. By combining its technical and technological knowledge with a high-profile product, Termoleader Srl specializes in guiding the customer from the moment of technical need to the realization of a customized solution. Thanks to its targeted organization, it is able to respond quickly both in the preliminary proposal phase and in the product realization phase.

production of welding machines, long arc stud welders, short arc, thermocouples, capacitive discharge, capacitor discharge, sale and rental of Nelson and CRT Eurosaldature stud welders, after-sales service, repair, spare parts, CRT Eurosaldature, Nelson, HBS, BTH, supply of smooth studs, threaded studs, SD, pegs, anchors, construction, carpentry, patented stud welder Ri.Na., Bureau Veritas, welding certification WPQ UNI EN, insulation, diaphragm plates, floor reinforcement, beams, refractories, shipyard, furnaces, heat exchanger, bridges, metal carpentry, construction...

... continuous development of its products. Heat Exchange Alfa Laval offers a comprehensive range of heat exchanger solutions, from the simplest applications at low pressures and temperatures to the most demanding conditions, with aggressive fluids at high and variable temperatures and pressures. Centrifugal Separation Driven by the desire to harness the invention of Gustaf de Laval, the cream separator...