air unit Italy

... button and emergency mushroom, at a fixed speed of 15 meters / minute - Pneumatic tail lifts and compressed air system up to the gate movement management valve. Total length (mm):935 Total width (mm):950 Maximum box width (mm):650 Minimum box width (mm):160 (on request 120 mm) Minimum box height (mm):75 Conveyor rollers width (mm):780 Conveyor roller diameter (mm):48 Feed speed (m/min):15 Installed power (kW):0.37 Maximum load (Kg):50...

... PLUS) Integrated aftercooler for cool air delivery (FIBRA PLUS) Unit ready to operate High quality air output (oil carry-over <1 PP) Compact design, extremely manoeuvrable Easy to transport, lift and load Outstanding accessibility for maintenance...

...Towed and transported atomizer with a tank capacity from 200 to 2000L and an air unit of 470, equipped with a 450mm diameter turbine, 6 outlets, 18 nozzles, with the possibility of hydraulically adjusting the upper mouths.

...The RW ax systems for industrial refrigeration of process fluids (water, water and glycol) are air-cooled: the only resource used is therefore electrical energy, a decisive advantage in contexts where water conservation is advisable (due to its cost or scarcity). The IP54 level protection for the machines (against dust and other agents) facilitates their installation in outdoor environments...

...MITA offers various configurations of industrial chillers, either air-cooled or water-cooled: all equipped with an electronic microprocessor for setting and displaying liquid temperatures at the outlet, and all suitable for Industry 4.0. Some advantages of industrial cooling units: - Autonomous air-cooled unit. - Maximum reliability and efficiency confirmed by rigorous internal testing. - Customizations and flexibility allowing for up to 80% energy savings in versions with free cooling systems.

... exposed rebar (by sandblasting or using abrasive brushes). Pour about 2/3 of the mixing water into the mixer, add Grout 6 SFR and the remaining water; continue mixing until a homogeneous, lump-free mixture is achieved. The mixing water should be about 13%-15% by weight (3.5-4.5 litres per bag). Use casting procedures that ensure the absence of discontinuities and avoid the formation of air pockets. For high anchoring sections, it is advisable to add Ghiaietto 6.10 (please refer to the appropriate technical data sheet for more information). Packaging: 25 kg bag Unit of Measure: €/kg...

...N ° 1 drilling rig, Ellettari brand, Ek 200 P model with separate control unit. Year of construction: 1999 Recently revised Power unit on wheels Diesel engine with 60 hp power Drilling unit with modular Mast rubber tracks for booms 1 m or 1.5 m long maximum pull 2000 kg Rotation head with maximum torque 700 kgm. 5 speeds Floating shaft with internal passage 40 mm Air / water / mud adduction head Excellent movements Immediately available Visible at our office Price upon request Year:1999 Condition:Refurbished Stock number:PX21943 Guy:drilling rig...

... the stem: 4 - 13 mm Wheel width: 150 / 200 mm Working wheel dimensions: 610 x 150 x 304.8 mm Working wheel speed: 20 - 45 m/sec Guide wheel dimensions: 350 x 150 x 127 mm Cycle time: 400 pcs/h Power supply: 400V 50Hz 3Ph V/Hz Air: 5 - 6 bar Dimensions (height 2000 mm): 2400 x 1600 mm Machine weight: 8500 kg...

... technology ensures high accuracy; minimum noise production; reduced power and air consumption; reduced maintenance. Cuts per minute:30 Pulling Speed:115 m/min (380 ft/min) Pulling Speed (Brushless):160 m/min (530 ft/min) Average power consumption:3 kWh...

...air renewal system implemented with the inclusion of a heat recovery unit with integrated refrigeration circuit, air distribution for exhaust and supply...

...The Win Cooler is an evaporative cooler capable of reducing temperatures in small rooms, finding applications in various fields. It is an eco-friendly and low-cost solution, operating on the principle of evaporation: warm air passes through the wet evaporative panels inside the unit and is released back into the environment cooled down. The practicality of the Win Cooler lies in the fact that it is installed outside, thus avoiding clutter in small spaces. It can also be applied in civil contexts.

...Introduced for the first time to the market in 2008, the Recube unit is now the flagship of Rimor's production. Recube is a compact ventilation unit capable of achieving excellent performance in limited spaces. It can be mounted on coating, rotogravure, flexography, and laminating machines, and allows integration with energy recovery systems, insulation systems, solvent control, flow rates, and pressure.

... equipped with 6 rolls with insert in tungsten carbide, an air-blower and a tank for collection of the scales. The lubricant dispenser Mod. DL14 has two cochleas, one vertical and one horizontal. The cold rolling cassettes Mod. CRC150-30-33 are strong-built and do not require an axial regulation of every single roll because the very close tolerances of every single components of the cassettes guarantee the auto-alignment. The vertical bullblock Mod. MV14 can work with one or two passes. The double pass is necessary to obtain the diameter 4.00 mm.

...Army containers are suitable for air, land and sea transport available in both ISO 8’6” and 8′ with side doors and/or end doors painted in different colour shades and finishing (i.e. antiinfrared) 40ft, 20ft, Bicon, Tricon and Quadcon configurations (Italian production – TAA compliant) It is possible to provide customized unit on demand.

... water condensing unit such as evaporative W-tech condensers over air condensers is simple: - Consistent performance throughout the year due to lower condensing temperatures - Higher thermal efficiency during winter/summer months - Optimum efficiency thanks to the use of recirculating water in fall with countercurrent air - Lower power consumption compared to an air unit...

... parts covered by the leaf wall: crucial for avoiding surprises from diseases and pests. As a professional product, it comes standard with an electric control unit featuring pressure adjustment and a main switch with calibrated returns and cabin control, ensuring safe operation.

... stroke of the hydraulic cylinder is 500mm, while the gap between the two working tables is 600mm. The MST electro-hydraulic press is equipped with a hydraulic power unit with monitored Rexroth solenoid valves. Other standard features include the following: – Siemens CPU for setting dimensions – Cylinder adjustment with limit sensors – Automatic movement controls using dual buttons – Air/oil heat exchanger – Pressure switch – Rear protective metal mesh.

... method to reduce the effects of moisture damage (a single unit can dry very large areas). - Does not require supplementary heat to operate. - Integrated heater regulators ensure peak performance throughout the year and help minimize operating costs. - Can be placed in indoor or outdoor environments. - Air can be directed to specific areas using flexible ducting. - Temperature control accessories are...

... cones (one per lane). After the picking phase, a pneumatically controlled mechanical system deposits the paper cones onto their respective lanes on the conveyor, located beneath the machine. The complete cycle time for inserting the paper cone is 2.5 seconds. Compressed air supply at 5 atm.

... all components necessary for correct operation of lv system. Timer for extraction of fumes before operator enters inside pressurized system atex lighting area for complete installation of air extraction unit pressurization unit complete with synthetic pre-filter, electric fan, support structure and manual shutter for regulating incoming air thermo-radiating unit integrated in pressurization unit and complete digital heat adjustment system All tecno azzurra systems can be designed and manufactured according to your specifications.

... Grips solely through its terminal parts, in this case, the tentacles of the Octopus Grip, which can be easily detached and positioned near the Robot Grips by a single operator on a vertical storage unit. This last feature of the Octopus Grip enables savings in tool change times and, above all, storage space. The system has a strong inclination towards flexibility, from which its name derives.

... oiler Customizable mechanical seals in materials and cooling types. Applications Water supply for both civil and industrial use Irrigation systems Air conditioning systems Condensate conveyance Superheated water General water treatment Marine and saline waters Series CSM Monoblock centrifugal pumps with a standardized body according to EN 733 standards, allowing complete disassembly of the motor unit without removing the pump from the piping. Standard flanging UNI 2236 PN 10. Body, cover, and impeller made of cast iron (bronze or AISI 316 available upon request)...

...even for single pieces or small batches. The selection process is carried out using programs developed in-house, based on the experiences from its own thermodynamic research laboratory, which is also internal. The company has held ARI (Air Conditioning and Refrigeration Institute, Arlington, Va, USA) certification for years. Design according to ASME, AD2000, and other calculation codes is possible, with testing conducted by notified third-party entities.

Since 2011, we have been designing and producing customized photocatalytic filters for air treatment unit manufacturers looking to expand their range with photocatalytic technology products. Photocatalytic filtration activated by titanium dioxide – TiO2 – is a remarkably simple way to reverse the contamination process, keep surfaces clean, and purify the air. A portion of the UV rays in light...

... compression pockets. The compressor is directly connected to the electric motor, creating a seamless unit capable of compressing air at just 1,500 RPM or even less, with a lifespan of over 100,000 hours. The company offers a complete design service to develop customized compressed air solutions to meet specific customer needs. Mattei also produces air treatment products, such as dryers, filters...

Siret Impianti has been active since 2003 in the sale of air conditioning, cooling, and refrigeration systems intended for residential and industrial use. Siret Impianti also handles their design, installation, repair, and maintenance.

The Domus Residence offers elegant studios, one-bedroom apartments, and penthouses for temporary use: comfortably and functionally furnished, they feature one, two, or more beds, a living area, kitchenette, and bathroom. Daily cleaning service and linen change are provided. Air conditioning is available during the summer months. Each unit is independent and equipped with an intercom and private...

Air Conditioners - Heat Pumps QUALIFIED INSTALLER...

Air Conditioning - Refrigeration...

...Frigotecnoclima is a certified company by the relevant authorities "Accredia. F gas Fer ICMQ" for carrying out installations for residential and commercial air conditioning and heating, operating in the Milan area and province. All technicians hold an F-gas certification, which is now essential for those working with fluorinated gases that have a significant impact on the harmful effects of...