tests on materials Italy

... field. Laboratory tests In collaboration with the Civil Engineering Department (DICATA) of the University of Brescia a set of laboratory tests were carried on masonry samples in order to check the capacity of the injection anchors with sock in terms of adherence and mechanical interlocking with the substrate. The execution, during the research activity, of a great number of tests has lead to the definition of parameters that are fundamental for the design of injected anchors with sock, as the bond strength at the steel barinjected grout interface an at the injected groutsubstrate interface.

...ME-FDE SEALERS WITH DOUBLE MOTORIZED PULSE SEALING BAR AND TEMPERATURE CONTROL The new bench sealers with double impulse sealing bar and temperature control, allow the optimal sealing of any type of envelopes and sealable bags. The high pressure exerted by the motorized descent of the bars (0.7 Kg./cm2) allows perfect sealing even on very thick materials. The double active motorized sealing...

... durability tests and test for product quality control during the various processing phases. On request we can issue the relevant certificates in compliance with national and CE regulations. PASSAGE DIAMETER:22 mm Passage...

... tests on the surface to be treated so as to verify the optimal operating conditions. Due to the high alkalinity of Consilex Idrocon WV, it is essential to handle the product with care, wearing glasses, a mask, protective gloves and waterproof overalls. Consilex Idrocon WV is to be applied in accordance with the porosity of the substrate. Perform preliminary tests. Plastic can 5 kg - Plastic can 10 kg...

...have non-standard dimensions, and can be produced in small quantities. Prototyping, functional and assembly tests, and rapid delivery are all available. Different materials:+ 50 Fixed Dimensions:+ 500 Special Dimensions:possible Quality:High...

... BS6920 and FIRE TEST REPORT F180. Product suitable for use on laminated and/or solid wooden supports. These types of supports can be very heterogeneous in structure, type, and composition. It is recommended to conduct on-site tests to assess the load-bearing capacity of the fixing point. Ease of penetration into porosities and hollow areas. Allows for secure fastening without expansion and therefore without stress on the base material, and is resistant to acids and solvents, adapting to repairs and applications on all support materials.

...The patented door stop is an innovation set to revolutionize the market in this sector. It is the only door stop that works equally well on the door's strike plate, the frame, or double doors, featuring millimeter adjustments ranging from 0 to 124 mm, thanks to the inclusion of special extensions. The construction materials have been extensively tested by specialized laboratories, as has the operating mechanism. The rigor of the tests allows us to offer you a durable and reliable product. A product by Tecnometalsystem.

...The production facility specialized in industrial painting operates on metal and plastic materials, performing both liquid and powder coatings. The application of paint is carried out according to the specifications provided by the client; we also offer solutions for selecting the appropriate paint based on the type of material. The process is certified and set up in strict compliance with the...

...natural flavors, antioxidant, enhancer, aroma. The company operates in compliance with national and European regulations, under a self-control regime and in accordance with the principles of the HACCP system. The company implements cleaning and disinfection procedures, pest control, and hygiene checks, and conducts microbiological and chemical tests on raw materials, semi-finished products, finished products, and samples during processing. The fresh product received is blast-frozen at -20°C and kept at that temperature for at least 24 hours to address any potential hygiene-related deficiencies.

... environment. Powder painting, electrophoresis or sanding: our mission is achieving excellence in our work through advanced technologies and careful choice of materials. This great care and commitment allows us to pass on the savings resulting from quality and durability to our customers.

...It is a company that has been on the market for over 45 years and specializes in electrical/electronic and mechanical assemblies, lamp panels, etc., and is also capable of designing and conducting tests according to customer specifications. Our strengths are the experience and professionalism of our staff, and we also have multiple equipment for soldering boards and producing wiring. We have...

Our company has been operating in the field of brakes and clutches since 1921. We produce friction materials for every application: industrial, agricultural, and transportation sectors. Our product range includes asbestos-free products, steel, metallic, and sintered materials. We can carry out processing based on drawings or samples and conduct projects and technical tests. The high technical...

Ultrasonics - Radiography - Magnetoscopy - Penetrant liquids - Induced currents Mechanical tests - Metallurgy - Metallography - Material analysis - STAFF TRAINING n.s.pnd a reality in NDT Serving companies Our NDT was established in 2004, providing companies with a range of services and solutions necessary to compete in the European market. Our goal is to ensure better competitiveness for companies by bringing innovation and quality through the offering of cutting-edge services and solutions, thanks to qualified personnel.

... tests, ensuring reliable long-term performance. Durability and robustness are the features you can count on. Our professional support team is ready to answer your questions, ensuring that your machines are always performing at their best. We offer various customization options to tailor the machines to your specific needs, guaranteeing a completely personalized coffee experience. Our global presence is a testament to the excellence of our coffee machines, widely used in the best venues and cafes around the world.

... specific needs and forge the best performing raw materials with the most adequate, and cost effective production process, to satisfy each specific application at best. CISME products are the result of careful and meticulous tests, and provide original alternatives for many production processes. CISME is constantly working in partnership with a network of raw material suppliers selected on the basis...

... for the development, selection, and use of high-performance composite materials and applications. The modern instrumentation of the laboratories has allowed for the execution of multiple tests on raw materials and finished products, ensuring Client Companies a systematic control over entire productions. The research activities carried out by the Center aim to offer companies that use and transform...

... type of product allow companies and suppliers to benefit from integrated analytical services (chemical, microbiological analyses), consulting, and targeted personalized research focus on individual issues.

... printers made with new and certified spare parts, produced within the European community. While common regenerated toners are processed by cutting corners on raw materials to compete with compatible toners imported from China, all components present in KRAKEN® toner cartridges, including chips and drums when applicable, are always replaced. Each KRAKEN® toner cartridge must pass up to twenty-five processing steps before it can be sold, including the challenging print test.

... in isolated and conditioned environments, ensure the proper preservation of the product during both the processing and storage phases. To achieve its objectives, Falco relies on a specialized laboratory in food chemistry and technology supported by a highly specialized staff, which constantly monitors, through chemical-physical and microbiological tests, both the raw materials entering the production process and the finished products. In compliance with current regulations, the laboratory ensures product quality and control over the production process.

Design and proprietary know-how: low-cost biological systems for wastewater treatment and organic solids from agri-food industries. Design and consulting for mini and micro wind power plants. Laboratory tests on digestates, optimization of anaerobic digestion plants. Sale of laboratory instruments for optimizing biogas plants. Professional training courses in renewable energy: design and...

... the lab and on-site, as well as certification of the results obtained: analysis and control of steels, light alloys, and composite materials; analysis of metals, penetrants, components, building materials, fabrics, and water; hardness, resilience, tensile, compression, bending, and flexural tests; environmental analyses; surveys and assessments; in the naval field, testing the integrity of large...

The company CON. GEO s.r.l. is engaged in the activity of geognostic investigations, geotechnical laboratory analyses and tests, on-site investigations, geophysical surveys, tests, controls, monitoring, and non-destructive testing on structures and construction materials.

Glove Brk operates in the sector of sales and supply of personal protective equipment and medical devices. Specifically, we have the necessary know-how to source and provide disposable gloves of all types and brands, gowns and disposable materials in non-woven fabric and other materials, surgical masks and FFP2 and FFP3 masks, rapid COVID-19 tests of all types and brands, and much more. Over the...

... milestones related to the development of sustainable growth. DERMAKIM products are in continuous evolution to enhance our knowledge and to achieve significant progress in terms of quality and safety. Laboratory tests and experimental tests are conducted to evaluate the performance of our chemical products and to ensure their functionality in the tanning process.

... market (0.5 ml/m3). - Fully AUTOMATED systems; simply set the volume of the rooms to be treated and the concentration ml/m3 of the disinfectant used. - Top Performance; QUALITY OF THE DRY FOG certified by laboratory tests (≥ 90% of particles dispersed with a size ≤ 5 µ). - Disinfectant devices and products registered and CERTIFIED by the Ministry of Health. - Possibility to SCHEDULE the automatic start of cycles, even remotely. - Extreme SPEED; depending on the chosen device, we can treat from 2000 to 6000 m3 in just 45 minutes.

... daily production, ensures our clients an enormous quickness between the phases of quotation, management, and delivery of the treated material. Furthermore, our seriousness in executing controls on all treated materials allows us to guarantee, even with the issuance of treatment certificates, the perfect success in treating our clients' materials. The diversification of treatments carried out by...

...The company specializes in alkaline electrolytic zinc plating in barrel systems for small metal parts in general, static alkaline electrolytic zinc plating with inline pickling, maximum dimensions m/m 400 x 1000 x 3000, thick alkaline electrolytic copper plating on carburizing materials, electrolytic nickel plating of small metal parts made of iron and brass, natural and black anodic oxidation...

Chemical and microbiological analyses, sound level measurement, water analysis, waste, air emissions - Toxicological tests on cosmetics, in vitro tests, tissues, medical devices, quality control, technical consulting, research...

... partnerships, Adda Ecologica can now rely on high-quality raw materials, always updated information obtained through research and field tests, as well as leading technical analyses and consultations in various industrial sectors. Adda Ecologica is capable of producing custom chemical products, belonging to the cleaning and lubrication sectors, flocculants, and additives for wood processing.

... of the production processes used and the materials. Completing the product range is the high-quality, breathable, coagulated microfiber LedraTM, which has been highly valued in footwear production for years, along with various coated products and special heat-adhesive materials for bonding fabrics and leathers. Characteristic of the industry, in addition to the experience of the founding partners...