plastic injection parts Italy

...Used for seals and custom rubber and silicone parts, also with metal or plastic inserts, for medium to high quantities, with the possibility of automating equipment for repetitive series.

... absence of glue. The machines and equipment used for the production of highly innovative stirrers (moulds treated to avoid the use of lubricants and without plastic waste; electrical injection presses without hydraulic oil and with low energy consumption) together with highly qualified personnel for accurate control of production, ensure high standards of quality, safety and hygiene of products in compliance with current industry legislation.

...connectors). Consolidation and repair of works subjected to environmental, dynamic, hydraulic stresses, such as tunnels, hydraulic, marine, underground works, industrial buildings. Application surfaces should be clean, free of dirt, crumbling and non-adhering parts, dust etc., and saturated with water "saturated with dry surface". An adequate roughening of the surfaces by scarifying, sandblasting...

... materials for co-injection molding are: - PP - PBT - PA - ABS - TPE - PPS - PEEK All workstations in the co-injection molding process are equipped with process controls to verify cycle stability and discard potentially defective parts if necessary: a procedure that allows us to deliver 100% verified components.

...metallization, chrome plating, and ultrasonic welding on the molded plastic parts. Ambroplast always develops each project in collaboration with the client, starting from rapid prototyping to mold construction and pricing. It is located in Albairate, in the province of Milan, at via Gorizia 20.

...followed by the manufacturing of the molds, and continues with injection molding using modern computer-controlled machinery and final chrome plating. Cutting-edge technologies ensure maximum quality and precision at every stage of the production cycle. We look forward to seeing you.

Errecinque is a leading company in the field of thermoplastic piping, injection molding of plastic and rubber parts for industry, particularly for the automotive sector. Established in 1981, the company boasts 4 production facilities in Italy, 1 in Romania in JV with Rochling Automotive, and a subsidiary with a warehouse in the USA near Detroit. Errecinque designs, develops, and manufactures...

... personnel, services, and technological innovation. We produce parts in all types of rubber: ACM, EPDM, FKM, VMQ, FVMQ, CR, HNBR, NR, NBR, NBR/PVC, SBR, and in various thermoplastic materials: ABS, PA6, PA6.6, PA6.6 glass-filled, PBT, PC, POM, TPE, TPU. We also produce overmolded items in rubber-metal, rubber-nylon, and rubber-canvas for high and low-pressure seals. Our injection, compression, and...

Since 1954, we have been present in the injection mold construction sector for plastics. Over the years, the company has evolved in processing technology, utilizing highly specialized personnel and increasingly advanced equipment. Decades of experience allow us to tackle the construction of molds for a wide range of products: from technical parts used in the electronics, automotive, and thermal...

... certified compounds, for example, for use in contact with gasoline and oils. The materials used include ACM, AEM, EPDM, FKM, VMQ, FVMQ, BR, CR, IR, NBR, HNBR, and SBR. The presses used range from 100T to 300T, both horizontal and vertical. The molding technologies include injection-compression, injection, compression, and injection-transfer. The finishing of the parts is done manually, using cryogenic...

...METECH Innovations is a company specialized in design, engineering, and manufacturing solutions with over 10 years of experience in CAD modeling, Project Management, and injection molding of plastic and silicone. Among our areas of expertise are; medical devices and prosthetics, consumer electronics, mechanical parts, sports equipment, automotive, textiles, children's products, pet products, and...

... manufacturing services, accepting orders from all over Italy, which is a fundamental rule for us. We do not overlook any product category; we create components for various sectors such as industry, automotive, medical, nautical, and advertising. We can produce plastic parts and precision small components of small and medium sizes using materials like PP, CPP, PELD, PEHD, ABS, PS, PA6, PA6.6, PA12, PPS, PMMA...

Di Candia Srl is the parent company that encompasses the following businesses: DC Di Candia Ruote: specialized production of wheels and supports for high temperatures, for the food and industrial sectors. Di Candia Srl: production of molds for thermoplastic materials and plastics, molding of thermoplastic materials and coatings for high temperatures, molding of components for the aerospace and foo...

We started our activity in 1994 as a company specialized in the design and construction of injection moulds for plastic materials. Thanks to the almost thirty-year experience, we design moulds for serial production of plastic parts mainly for the Automotive, Automotive Lighting, Household Appliances, Home Automation and Gardening sectors… and we are ready to embrace new challenges and new...

... square meters, divided between offices, production, and warehouses. It employs 27 staff members, has an excellent machine park, 3 owned vans for deliveries, and two large warehouses, one for plastic granules and one for finished products. ESSE.PI operates in various sectors, primarily low-voltage electrical materials, household appliances, and automotive, and potentially in any field that requires the molding of plastic parts. The main clients of the company include ABB, CANDY, and FIAT.

You will get high-end injection molds with fast cycle times for producing plastic packaging products like cutlery, lids, jars, containers, closure cups, etc. Best price, fast delivery times, and a project consultant from the first contact to the delivery of the mold. For you, we can conduct initial trials or production, development of your parts, and provide technical input. Send us your inquiries and let us convince you of our quality and long-term experience.

Company specializing in the production and trade of plastic tubes and cones for natural and synthetic fibers. Cylindrical perforated bobbins for dyeing and steaming. Truncated conical bobbins. Internal-use tubes with high mechanical resistance. Caps, edge covers, and deflection rings. Flanges for twisting and texturizing machines. Title markers, locators, end caps, and spring clips for caps...

...The company ER.P.U. Taglio Laser - Stampaggio Materie Plastiche is a young and dynamic business located in Premana, in the province of Lecco, specializing in various processing services. Among the services offered, the highlights include "taglio laser lamiera 2D", "stampaggio materie plastiche", "marcatura laser", and "assemblaggio conto terzi". We operate in the field of injection molding of plastics for third parties. We have two vertical presses specialized in overmolding parts with inserts. For more information, visit the website www.erpu.it or follow our Facebook page Erpu di Gianola.

...and extrude production tubes. We find suitable solutions, always seeking innovation and quality. We specialize in riveted lamp holders, composite wiring, bipolar, tripolar, and quadripolar plugs and sockets, LED lamp holders, die-cast plugs and sockets, ceiling lights, roughing diamonds, eyewear small parts, expandable eyes, and plastic small parts. We produce steel molds for injection molding.

... a specialized team, Biasin also designs and manufactures injection molds for all PP/ABS parts for batteries. The production is equipped with new injection presses guided by electronic systems for automatic regulation and statistical control of the processes. Biasin has been working for many years according to the UNI.EN.ISO 9001: 2000 certification.

... processes that finalize the finished product: assemblies, mechanical processing, pad printing, and, with the help of external partners, any surface treatment (e.g., painting, chrome plating, metallization). The company obtained its first UNI EN 29002 certification in 1995, followed by subsequent updates up to ISO 9001:2008. Tecnoplast has also received several official recognitions in the field of Quality directly from its clients, such as the Qualitas award from the New Holland group, as the best supplier of plastic parts.

... rubber - injection molds for plastic and thermoplastic materials - molding equipment: pneumatic systems for loading/unloading, automatic extraction systems for molded parts - temperature control units for injections. Mold testing: - testing of vulcanized rubber molds (EPDM, SILICONE, VITON, NATURAL) - overmolding rubber-plastic.

Eurotecnica, a company founded in 1988, produces injection molds and technical plastic components in Osimo for Automotive, White Goods, and other sectors. We specialize in mold construction and the production of parts in bi-material and bi-material + metal (co-molding), as well as in metal replacement. We consider ourselves a dynamic and professional company, suitable for clients seeking quality, flexibility, and competitive prices.

... processing on prototypes and series parts. We design and manufacture injection and compression molds, both single and multi-cavity, for the molding of rubber, plastic, thermoplastic, and silicone. Our production department is equipped with Mikron CNC machining centers that enable us to carry out continuous and simultaneous 5-axis machining with a high degree of finish and precision. We employ the most modern production techniques. Always aiming for a complete and professional service, upon request, we can provide finished parts including both thermal and galvanic treatments.

We design and manufacture injection molds. Our company, founded in 1962, produces injection molds for medium and small-sized plastic parts. We specialize in the construction of injection molds weighing up to 3000 kg. For the production of: optical groups, indicators, lighting fixtures, motorcycle instrumentation, electric motor components, lighting components, vacuum cleaner parts, coffee machine...

... components and groups for fluid filtration, boxes for hemodialysis and cardiac monitoring, Components for cardiac surgery, Valves and fluid control components, others 3- Industrial: electronic parts, household appliances and household appliances, others.

...M.P.L specializes in the design and construction of molds for aluminum, brass, zamak die casting, and plastic injection. We also offer continuous support for molds we produce, providing spare parts in a short time. Companies operating in the housing, plumbing, automotive, and electronics sectors have found in "M.P.L" an excellent collaboration and quality, with a willingness to engage in...

... various types of molds for aluminum, magnesium, zama, and plastic for presses up to 4000 tons. Among the various known technologies, we list: jetcooling system, squeeze-pin technology, various vacuum systems, and vacuum technology with hermetically sealed molds. Traditional casting systems or with a third plate. The Just Projects technical studio utilizes CATIA V5 software. Discretion and professionalism in client relations are integral parts of our work philosophy, always accompanied by a constant evolution of our know-how.

Plastic injection molds...

Company with 40 years of experience in the field of machine tools and hydraulic injection presses for the molding of thermoplastics, thermosets, and rubber. We handle the construction, regeneration, processing, and repair of mechanical parts from any Italian or foreign manufacturer. We offer spare parts for plastic molding presses both by sample and by design: bimetallic cylinders, nitrided...