rubber steel Italy

Euromask®, a brand of Finishing Group, is a leader in the production and distribution of professional masking systems for all surface treatments. For over 25 years, Euromask® has been distributing its wide range of caps, covers, hooks for painting, tapes, and labels, tubes, and special printed products worldwide. Speed, flexibility, and professionalism are the key words to Euromask®'s success: - 8...

...An alternative to water jet cutting, particularly effective and competitive for the rapid execution of productions and prototypes, maximizing material optimization, with the ability to cut graphite as well as steel sheets and plastic materials. No special equipment is required; just the design of the part in dwg or dxf format is sufficient.

... central support. This solution allows to have a greater flow rate that reaches up to 90 Kg/m. Features:Free rubber-coated conveyors D30 P40 Orderable length (mm) :500 - 1000 - 1500 - 2000 Main structure :heavy duty metal frames Rollers :ball bearing steel, rubber coated Rollers diameter (mm) :32 Rollers pitch (mm) :37,5 Orderable width (mm) :500 - 650 - 800 - 1000 Load capacity (Kg/m) :75 - 60 - 45 - 90 Adjustable supports :2 (650-850 mm)...

...Flexible and extendable stainless steel tube for domestic gas kitchens. Insulating coating with anti-corrosive sheath, self-extinguishing, non-toxic. FL284/5 FF: 500/1000 mm G 1/2” FF FL284/5 MF: 500/1000 mm G 1/2” MF FL284/7 FF: 750/1500 mm G 1/2” FF FL284/7 MF: 750/1500 mm G 1/2” MF FL284/10 FF: 1000/2000 mm G 1/2” FF FL284/10 MF: 1000/2000 mm G 1/2” MF...

...In recent years, the world of industrial supplies has undergone significant changes in the choice of materials for many applications. Thermoplastic materials are now preferred over metals (steel, iron, and aluminum) due to their lightness, rigidity, and corrosion resistance, not to mention their cost-effectiveness. Given the versatility of thermoplastic and elastomeric materials and the...

... rollers or with scraping rubber rings are mounted. The flexibility of garland sets enables their adaptation to the material to be transported, facilitates transportation, reduces impacts on the rollers, and limits any lateral slipping of the rubber matting. The diagrams and Table 90 show the shapes of mountings of garland sets envisaged in TECNORULLI’s production programme. Other shapes may be considered on request.

... external bayonet filling necks with a 38 mm passage. The G2 filling cap has numerous applications in the construction and agriculture sectors, including rubber-tired loaders, tractors, excavators, earth-moving machines, trucks, gardening machines, motor pumps, sprayers, and irrigators. The careful selection of raw materials and the adoption of innovative production processes are the primary guarantees of quality and long-term reliability of our product.

...Syntech HAG Iniettore This rubber and steel injectors are to be inserted in line with the damage, cracks, loose foundations, joints, cavities and so on, then waterproofed through the use of Syntech HAG Eco and Syntech HAG Flex hydro-expansive polyurethane resins, specifically for immediately stopping water infiltration. Equipped with a “flat head” with non-return valve, it is used in conjunction...

...Rubber Crawler Undercarriage G5 - Rubber Crawler Undercarriages...

...Professional wall-mounted hose reel in stainless steel complete with 10 meters of blue rubber hose 1/2".

...The Bumper-car pavilion consist of a delimited steel platform and a roof structure where electrically operated vehicles are individually operated by the passengers. Each car have a capacity of 2 passengers and is equipped with inflated rubber bumper ali around the perimeter. The power is supplied to the car through the steel pavement and an apposite ceiling steel net fixed to the roof structure...

... three levels and are equipped with a blue rubber closure. The maximum load capacity is 200 kg. The trolley is equipped with anti-thread wheels that ensure easy maneuverability in the department, reducing the physical effort of operators. Additionally, the trolley can be customized to meet specific needs. The bag holder is provided in a kit for assembly to optimize logistics worldwide. In summary, the bag trolley is a comprehensive and efficient solution for managing bags in leather goods workshops. Product Sheet PB_Z_K_01cm154x71x189 Load Capacity: 200 kg Dimensions: cm 154 x 71 x 189...

...Round-tipped chisel Steel blade Rubber handle Size: 140mm SKU:40814MF...

...Errecinque designs and manufactures a significant number of rubber components, most of which are produced through injection molding. Various materials are used based on the technical characteristics required and the needs of the customer. Components are also produced using co-molded metallic materials, such as steel, aluminum, and brass. Errecinque has 11 vertical presses and 3 horizontal presses, with a range from 20 to 600 tons. Upon request, it is also possible to imprint a custom brand on the component.

... core from Tedeschi Gomma are used as check valves for sewage pump priming systems, as floats inside vent pipes for water supply systems, as floats for air suction closure for tank filling, as floats for sanitary fixtures in milking systems, and as floats for overflow valves. Tedeschi Gomma produces rubber balls with a steel core. The steel core balls are used as valves for piston wine pumps.

...• Black EPDM rubber • Antistatic • Cover 3+1: 3 mm on the pulley side – for better grip and increased durability • Abrasion resistant: ISO 4649 < 100 mm3 • Polyester chain • Polyamide fabric • -20°C to +150°C Steel industry, foundries, cement plants, agri-food industry. Suitable for transporting hot products.

...Controller with a 2.8-inch color graphic display, capacitive buttons, and an IP65 front with a continuous surface. Monocoque construction. Internal and external construction in AISI 304 stainless steel. Adjustable rubber feet. Door seal resistant to minimum temperature reach. Cell profiles and door profiles resistant to minimum temperature reach. Technical compartment located under the cell...

...Food-grade rubber hoses are ideal for the suction and delivery of liquids, nutrient compounds, hot water, and steam. They have precise and certified characteristics. Typically, they are used in the F&B sector.

...Stainless steel clamps, pre-assembled, M8 - M10 Maximum diameter: 250 mm With or without rubber.

...6 WECK Flacon® 540 ml bottles with glass lids and rubber seals (clips not included). Reference: 5764308 Capacity: 540 ml Opening: 60 Sold in packs of 6 units. Lid and seal provided. Stainless steel clips not included. Height in mm: 184 Capacity in grams: approximately 500g depending on the product's density. Where to find your WECK jars in Spain? WECK glass jars with stainless steel clip closures...

...6 glass jars Weck Fête® 560 ml with glass lids and rubber rings (clips not included) Reference: 5901223 Capacity: 560 ml Opening: 80 mm Sold by 6. Provided rubber rings and lid. Clips in stainless steel not included. Height in mm: 88 Capacity in grams: 480gr. according to type of product. The jars for preserve WECK® are made of thick glass to resist boiling and sterilization. The lids being out...

Bitec S.r.l. specializes in technologies used in both clean and wastewater. It operates in the Water Supply sector, Primary Water Treatment, Wastewater Treatment, Sewage Pumping, Industrial Plant Engineering, and Irrigation. The company is structured into four distinct lines of activity: - Construction and production based on its own know-how and marketing, under its own brand "BITEC", of machines...

... of thick glass to withstand boiling and sterilization. Since the lids are made of glass, they cannot rust. Their advantage: they can be used and reused over and over again! The Weck ® connections are made of natural rubber. When your preserves are done and properly sterilized, the tongue of the connection bends forward. This is the natural visual indicator that your WECK ® preserves have been properly sterilized. All jars in the WECK ® series...

...Monolithic load-bearing structure made of galvanized steel, and upon request, in stainless steel. Closing devices, integrated into the structure, with adjustable force spring, rotating on ball bearings or self-lubricating bushings. Flexible panels made of transparent abrasion-resistant PVC, suitable for use at low temperatures (down to -35°C). Execution with rubber or colored PVC skirting...

... functions Shimano 7-Speed Gear Triple Chainring Front LED Light Numbered aluminum alloy frame Weight 22 kg including battery Adjustable and cushioned front forks Puncture-proof tires 27 × 2.10” Wheels: 27’’ with stainless steel spokes Carrying capacity 150 kg Easily adjustable seat post Rear kickstand Grips: Professional rubber Customizable colors for free (frame, wheels, and pedals)...

... sand pump, with an internal lining made of highly wear-resistant alloy, powered by an electric motor and trapezoidal belts, and a discharge pipe for the hydrocyclone made of special anti-abrasive rubber; - hydrocyclone composed of a cylindrical body with an inlet cone, vortex finder tube, and water discharge tube, conical body in interchangeable bolted sectors, discharge nozzle made of highly wear-resistant alloy, and collection box for hydrocyclone outlet.

...Our cassette washing tunnel is entirely made of AISI304 stainless steel. The high-pressure nozzle lines are adjustable in power, positioned at 360° to ensure optimal washing from dirt, sand, and product residues. The cover casing with rubber curtains allows for control over the washing phase and the positioning of the boxes; it can be manually adjusted in height and width using the appropriate...

... effort. They are supplied with battery and charger. Main features: Particularly solid structure, entirely in stainless steel. Electric devices for starting and stopping, controlled by software, located in the central body. Dc engine. Dry-type battery without maintenance. Battery charger with automatic removal when fully charged. Up / down control push-button panel. Battery charge display. Ergonomic handle. Loading surface in hard, non-deformable plastic. Small size. Handy and easy to manage. Pivoting rubber wheels. The rear wheels are equipped with a parking brake.

... equipped with sanitary drains, vent valves with PTFE seals, ¼” GAS connections, and rubber hose fittings: The housings are made entirely of AISI 316 L stainless steel with a mirror finish. Standard seals are made of silicone. Other materials for seals can be provided upon request. 5″ – FA01X05 – 225 mm 10″ – FA01X10 – 350 mm 20″ – FA01X20 – 600 mm 30″ – FA01X30 – 850 mm 40″ – FA01X40 – 1100 mm...

... – 842 mt Power: 2.2 – 45 Kw Pump body and motor support: micro-cast AISI 304 stainless steel Suction grid, shaft, pump body: AISI 304 stainless steel Impellers and diffusers: self-lubricating polyacetal Integrated check valve in AISI 304 Upper bearing made of anti-sand nitrile rubber Flow rates: 0 – 1000 lt/min Head: 0 – 842 mt Power: 2.2 – 45 Kw...