plastic case Italy

...CRYSTAL PLASTIC CASE CODE:006 Variants:Neutral, With logo Colors:Crystal/Transparent, Natural/Neutral, Black, Ice, White Measures:130 x 140 x 65mm Neck pieces:50 Neck size:50X50X26...

...The security micros seals are designed to attach the tag to the garment/product, ensuring that it cannot be used before any potential return. In fact, in case of tampering/breakage, the micros seal has been specifically designed to be non-reusable (once opened, it cannot be resealed). The cord is available in nylon, natural cotton, waxed, and alternatives upon request. Available in the following sizes: mm 145 - 170 - 210 - 240 - 260 - 290 and others upon request. For use, simply insert the arrow into the body of the micros seal until you hear a click.

... with 360° rotation for use in any position; - 8 meter pipe with quick release; - Safety valve included (in case of breakage block the gas); - Practical carrying case; - Noise level 83db. Example model:RAFALE 65 Max power (kW):37-66 Supply:Propane Gas pression (bar):1.5-3.5 Gas consumption (Kg/h) :2.6–4.8 Ignition:Electronic...

... construction sites, such as for example houses without gutters, north-facing walls, etc. A/c Paint for exterior walls of mineral substrate. BA. EU VOC limit value (Directive 2004/42/EU) for this product (Cat. A/c): 75 g/l (2007); 40 g/l (2010). This product contains a maximum of 25 g/l of VOC. Medium-thick protective and decorative plastic coating, resistant to impacts, to stressful climatic cycles...

...Blades for cutter to break Blade length: 18mm or 25mm Plastic case: 10 blades...

... controlled ventilation system through valves. For the optimal operation of the endothermic engine or in case it is required by law or specific regulations, the IGP tank cap can be equipped with unidirectional valves, that allow both the expulsion of vapors generated by fuel and the air inlet into the tank; moreover, in case of tank overturning, the loss of fuel is limited by the valves of controlled...

... have been designed to comply with hygiene standards, therefore they should not be shared with other patients/clients. They come with an elastic cord and are stored in a resealable plastic case with attached instructions. Pack of 45pcs Attention: under no circumstances should they be used by the professional operating the device. Always check the integrity of the single-client glasses before allowing them to be used for a laser treatment. Reference:OV9136N...

... diameter measures 30 mm only, with shaft diameter 4 or 6 mm. The encoder E30 is housed in an ABS plastic case, with axial cable or connector outlet. The output signals can be provided in NPN open collector, push-pull or line-driver format. Supply:5Vdc or 8/24Vdc Output signals:push-pull, line driver Pulses per revolution range:2 to 12500...

...Because the structure is made of non-toxic plastic and is easily transportable: you can place it where you need it and change its location whenever you need it. The paper inserted in Paperquick is made of mixed cellulose 80/20, also in this case the towels are characterized by the high product quality typical of ERREBI PAPER items.

...Trial lens case composed of a series of 266 lenses with plastic rims, removable tray in a suitcase.

... outgoing water (1 grain = 17ppm). Specifications: Conductivity: 0-5000ppm TDS: 0-9990ppm Celsius Degrees: 0.1-80.0°C Fahrenheit Degrees: 32.0-176.0°F Accuracy: ±2% Dimensions: 15.2cm*3cm*1.4cm/5.98"*1.18"*0.55" The product requires a 3V CR2032 button battery (included in the package) Product material: plastic Case material: synthetic leather Color: white * We provide exclusively to companies in the sector such as distributors, retailers, assemblers, and manufacturers.

... steel, case-hardened and tempered to 60 HRC, and are fully ground to ensure maximum durability, precision, and balance. The Msdtn type chucks are designed with a flange connection (AF) and can mount various types of flanges with ISO-A (DIN 55026), D1 CAMLOCK (DIN 55029), etc. The opening and closing of the collets and expandable collets in the Msdtn chuck occur through hydraulic feed at the lathe spindle nose. For bar machining, the use of double cone collets type BD is recommended.

... and secure connections between the decks. Technical data ▪ Birch plywood platform, 12mm thick, with an anti-skid top layer and fireproof, water-resistant phenolic coating on both sides ▪ Aluminum frame with shock protection board for the wooden deck panel ▪ The legs are attached to the bottom deck frame and are fixed in position by a special joint ▪ At the bottom of the deck, there is a quick connection system between the decks: BETA FastLock - activated by a hexagonal key ▪ The plastic corners of the deck are removable, providing access to the guides along the frame for mounting accessories.

...The coating can vary Plastic laminate Scotch Brite steel Scratch-resistant steel RAL painted sheet metal Systems located in iron and glass structures, the glass can be transparent as in this case, or you will have the option to choose Fumè or bluish; Alternatively, for the outside we can provide you with Stop-Sol insulating glass, as on the inside if you want a mirror glass.

Roplast S.r.l. was founded in the late 1970s as an innovative business project dedicated to the production of plastic tanks; it caters to clients specialized in creating containers for the storage and transport of hazardous and corrosive liquids. The constant focus on research and development, combined with pre- and post-sales customer support, has made the company synonymous with expertise, relia...

... cutting performance. The fibreglass backing does not damage or foul the surface worked in the case of accidental contact. It provides good strength while maintaining a satisfactory degree of flexibility. Recommended applications: Deburring, removing welding seams and spots, removing scale, rust and oxidation of any kind. Work surfaces: Alloyed and unalloyed steel, aluminium, nonferrous metals and alloys, structural steel, plastic, paint, varnish, filler Minimum order quantity for articles not included in 1036 program: 200 pcs/diameter 115 160 pcs/diameter 127 80 pcs/diameter 178...

...20 button Concertina Plastic resin case with scratch resistant finish Key of G-C this diatonic model is available in yellow,light blue, red and green...

...Set of 21 pieces consisting of: 1 Ratchet with 1/2" drive complete with sockets in a practical plastic case for easy transport to any work station. The case contains: 1 Tengtools 1/2" reversible ratchet 1 universal joint 2 extensions measuring 63.5 mm and 150 mm 1 reduction adapter 1/2" - 3/8" - 16 sockets with 1/2" drive (from 10 mm to 32 mm)...

With a solid experience in the sector, Cocoon is a company specialized in the production and marketing of packaging. The company, based in Lissone, in the province of Monza and Brianza, creates corrosion and shock protection systems that comply with American military specifications MIL. The company produces packaging dedicated to the electronics sector, the naval sector, the military, and aerospac...

Senzani, founded in 1953, specializes in the construction of vertical cartoning machines, side-load, top-load, and wrap-around case packers, tray formers, and palletizers. It constantly seeks advanced technological innovations and is always willing to work with its clients to develop solutions for specific problems, drawing on a long and established experience. It boasts very important clients in various sectors who have recognized and appreciated the quality and efficiency of its machines for years.

... mm to 38 mm, with fixed-head CNC lathes up to 70 mm in diameter. A key feature of the movable spindle lathes is their ability to turn very long parts, in one specific case up to 1,300 mm on difficult materials and complex geometries. The company has an adequate metrology room to ensure consistent quality.

... head CNC lathes up to 70 mm in diameter. A key feature of the movable headstock lathes is their ability to turn very long pieces, in one specific case up to 1,300 mm on difficult materials and complex geometries. The company is equipped with an adequate metrology room to ensure consistent quality.

... on metal surfaces and porous substrates such as concrete, fiberglass, and composite materials, even directly on site and in any weather conditions. SANDBLASTING Dres-Plast offers sandblasting services for various surfaces, including metal, wood, plastic, glass, marble, and stone. Treatments can be performed at our facility or on-site, with the possibility of using advanced techniques such as wet sandblasting to reduce dust formation, micro-sandblasting, and micro-aero-abrasion, always ensuring maximum precision.

... before or after molding and will retain the shape given by the tools indefinitely. Exceptionally, in the case of glossy surfaces or those covered with special bases, it is useful to treat the contact area before starting the molding process to ensure adhesion. Rollers and molds require no maintenance and, if used correctly, can last for years without any issues. The product is packaged in plastic...

... Guida, designed and patented new cases, first in coated metal and then in plastic, creating new and elegant lines with the help of his two sons, Gaetano and Giuseppe, always using cutting-edge technology. As the demand for cases grew, the company had to expand and equip itself with automated and robotic machinery to meticulously attend to every detail and meet market demands. The company, located...

... upon request... Self-adhesive labels on sheets Self-adhesive labels on sheets, available in A4 format for inkjet or laser printers and photocopiers, as well as in custom formats according to your needs. Self-adhesive labels on continuous forms Self-adhesive labels on continuous forms, both neutral and printed, including hot stamping. Continuous ribbons, label CASE LABELS SRL...

... global market, is firmly anchored to the grandstand, completely anti-loosening, and cannot be removed in case of vandalism. - Blindo Floor is the only armored flooring, certified class 1, made with interlocking stainless steel plates. The absolute novelty of Blindo Floor lies in the special interlocking system between the plates that transforms the armored floor into a single metal sheet, impossible to lift or break into. - We are capable of creating sports and exhibition structures for various events. - Various types of postal equipment are built, based on samples or specifications: carts.

... required tolerances as per the design. We are a family-run business, consisting of 17 people, and every type of work is directly overseen by us owners on-site at the company and, when possible, at our client's location. We strive to closely monitor the projects and provide a comprehensive 360-degree service. We also collaborate with other companies, such as electricians and electronics specialists. F.M.A. service works on plastic systems, general presses, and machine tools. We have qualified personnel with years of experience, but we are focusing on young talent, as we are already doing.

Corrosion-resistant pumps made of plastic. Horizontal, vertical, self-priming, and submerged - Peristaltic pumps for acids and abrasives - Standardized, multi-stage, split-case pumps for aqueducts and boosting, with open impellers for dirty water.