Results for

Carbonate

42 Companies

716 Products

Product recommendations

Netherlands

Spain

Germany

Germany

See more products

SMV FORGING SRL

Italy

The company S. M. V. has been working in the sector of hot forming carbon steels, alloy and stainless steels, titanium and special alloys (nickel) since 1960. Its business supplies the automotive, farming, petrochemical, construction, and hydraulics sectors, as well as industry in general. The quality department carries out precise checks at each stage of the production cycle, including verification of the chemical analysis of materials and non-destructive testing carried out in laboratories to look for any superficial defects.

Website
PRESSVIT S.R.L.

Italy

PRESSVIT s.r.l. specializes in manufacturing special cold forged parts based on a drawing supplied by the customer or designed according to final use of the product. It produces an extensive range of screws which includes screws with pre-assembled washers – Welding screws (capacitor discharge, arc, projection welding) – Anti-theft, tamperproof, security screws – Tierods, pins, dowels, dowel pins – Screws, rivets, internally tapped bushings – Captive screws with reduced shank – Headless screws – Screws for plastic, double start, special pitch – Self-clinching screws for thin sheet metal – Self-tapping, self-forming, Trilobular self-tapping, tri-plast screws – Hammer, knurled rivets – Cross drilled, full, grooved rivets – Removal screws – Special made-to-order screws.PRESSVIT s.r.l. also supplies all standard screw products with diameters ranging from 2 mm to 16 mm.

Website
TECMA SRL

Italy

Tecma srl is a leading company in heat and thermochemical treatments: gas nitriding, Tenifer® ferritic nitrocarburizing, carbonitriding, carbocementation, bainitic hardening, martempering, hardening and return to the atmosphere, salt and vacuum baths, solubilisation followed by ageing. One of the leading technologies is the 4.5 m vertical gas nitriding installation (5000 kg), equipped with potential nitrogen measurement sensor.

Website
TEMPRACCIAIO S.R.L.

Italy

Tempracciaio s.r.l. produces low and high carbon steel strips that can be: cold or hot rolled, annealed, raw, half hard, grey, blue, yellow and white tempered. The thicknesses range from 0.10 mm to 6 mm and the width is to measure. The company's policy aims at satisfying the customers' requirements and keeping its quality and efficiency standards. La Tempracciaio s.r.l. can be found in Caronno Pertusella (VA). It sells and produces hardened and hardenable steel ribbons.
M.E.G.A. SPA

Italy

M.E.G.A. S.p.A was founded in 1962 as a specialised workshop manufacturing forged metal and steel fittings. The company steadily expanded over the years to become leader in the field of forged steel fittings for the petrochemical industry; It also specialises in the design and manufacture of self-reinforcing steel inserts (Megalet) and special connectors (Heavy-Wall fittings). Here you will find kindness, courtesy and professionalism.

All the products for "carbonate"

Seamless pipes

Branch outlet fittings

Website See all products

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

PRECISINOX - NASTRI ACCIAIO

Italy

Precisinox s.r.l. is specialised in sales of stainless steel items. We offer a vast choice of products, such as tempered stainless steel strips, thin stainless steel strips, raw metal strips, spring wire and carbon strips for various applications in general mechanics. Sheet metal shearing work, cutting, flanging, including for third parties. The Precisinox company is an Alleima/Sandvik specialist dealer

Website
OCV ITALIA

Italy

OCV Italia has two production sites in Italy, both located in Besana in the province of Brianza. They have always specialised in producing glass fibres for reinforcing plastic materials. These products are applied and have different uses in a wide range of industrial sectors: transportation, concrete reinforcement, electronics, automobile, consumer goods, sports and textiles. The company is involved in top quality production, focusing on the search for innovative technologies and applications along with energy savings and environmental protection

All the products for "carbonate"

Type 30 roving ultrablade x

Website See all products
ISEF SRL

Italy

Isef Srl is specialised in the hot moulding of common steel, alloys and stainless steel from 2 to 60 kg, and in the manufacture and machining of moulds. Sectors: petrochemical industry, automobile, industrial vehicles, electromechanical applications, railways, farm machinery. We provide precise and efficient quality control, with ISO 9001 TUV, LLOYD'S REGISTER approvals.
ITG STEEL SRL

Italy

stainless steel sheets and coils in standard and mix first & second choice , galvvanized and non-galvanized steel and round bars
DURALAR ITALIA SRL

Italy

The company DURALAR ITALIA SRL, is a Service Provider, which operates in the Steels and metals - surface treatment and coating industry. It also operates in the self-lubricating coatings, pvd coverings, PVD coating machine, and carbon coatings industries. It is based in Gardone Val Trompia, Italy.

FONTI PREALPI S.R.L.

Italy

The company FONTI PREALPI S.R.L., is a Manufacturer/ Producer, which operates in the Mineral water industry. It also operates in the Natural mineral water, Water, carbonated, carbonated beverages, Natural mineral water, and Water, carbonated industries. It is based in Almè, Italy.
BROFIND S.P.A

Italy

The company BROFIND S.P.A, is a Manufacturer/ Producer, which operates in the Air purification - equipment and systems industry. It also operates in the solvent abatement devices, activated carbons filters, heat recovery, and Recovery of solvents industries. It is based in Milano, Italy.

Product recommendations

Netherlands

Austria

Germany

Netherlands

See more products

SOLAR SPECIAL STEEL INTERNATIONAL LIMITED

Italy

The company SOLAR SPECIAL STEEL INTERNATIONAL LIMITED, is a Wholesaler, which operates in the Steel, tool industry. It also operates in the high speed steel, carbon steel, Structural Alloyed Steel, and special steels for tools industries. It is based in Milano, Italy.
ADVANCED GRAPHITE MATERIALS ITALY S.R.L.

Italy

The company ADVANCED GRAPHITE MATERIALS ITALY S.R.L., is a Manufacturer/ Producer, which operates in the Carbon by-products industry. It also operates in the graphite electrodes, and refractory graphite industries. It is based in Malonno, Italy.
CARBON GRILL SRL

Italy

The company CARBON GRILL SRL, is a Distributor, which operates in the Import-export - coal industry. It also operates in the Carbonella per barbecue, Carbonella di legna, Bricchette carbone, and Distributore carbonella industries. It is based in Nuvolento, Italy.
M.P.G.

Italy

The company M.P.G., is a Manufacturer/ Producer, which operates in the Plastics - industrial raw materials industry. It also operates in the carbonfibre spun yarns, and carbon fibre fabrics industries. It is based in Olgiate Olona, Italy.
PROJECT ONE S.R.L.

Italy

The company PROJECT ONE S.R.L., is a Manufacturer/ Producer, which operates in the Radiology equipment, scientific industry. It also operates in the radiology, and Carbon fibre industries. It is based in Sovico, Italy.
LA RETTIFICA LECCHESE S.N.C.

Italy

The company LA RETTIFICA LECCHESE S.N.C., is a Subcontractor, which operates in the Rolling mills - ferrous metals industry. It also operates in the tungsten, and carbon steel industries. It is based in Lecco, Italy.
OXYTEK

Italy

The company OXYTEK, is a Wholesaler, which operates in the Engineering - industrial contractors industry. It also operates in the systems and equipment for the handling of mineral carbon, and equipment for producing optical glass industries. It is based in Milano, Italy.
CARBOPLANT SRL TRATTAMENTO ACQUE

Italy

The company CARBOPLANT SRL TRATTAMENTO ACQUE, is a Manufacturer/ Producer, which operates in the Water treatment products industry. It also operates in the activated carbons for water filtering plants industries. It is based in Vigevano, Italy.

ARTEMA S.N.C. DI BALLERINI SERENELLA E MARRI ORIANA

Italy

The company ARTEMA S.N.C. DI BALLERINI SERENELLA E MARRI ORIANA, which operates in the Rolling mills - ferrous metals industry. It also operates in the tungsten, and carbon steel industries. It is based in Cantu', Italy.
LAMIFLEX S.P.A.

Italy

The company LAMIFLEX S.P.A., is a Service Provider, which operates in the Plastics - industrial raw materials industry. It also operates in the carbonfibre spun yarns, and carbon fibre fabrics industries. It is based in Ponte Nossa, Italy.
FARDELLI LUIGI S.R.L.

Italy

The company FARDELLI LUIGI S.R.L., is a Subcontractor, which operates in the Iron alloys industry. It also operates in the low carbon iron, and metal stamping industries. It is based in Cerete, Italy.
4F ELETTROFORNITURE SRL

Italy

The company 4F ELETTROFORNITURE SRL, is a Wholesaler, which operates in the Electricity - distribution equipment industry. It also operates in the Electrical components and parts, Carbon and graphite - electrical components, Electrical components and parts, and Carbon and graphite - electrical components industries. It is based in Sant'Angelo Lodigiano, Italy.
TOYO TANSO EUROPE S.P.A.

Italy

The company TOYO TANSO EUROPE S.P.A., is a Manufacturer/ Producer, which operates in the Engines, internal combustion - components and parts industry. It also operates in the electronic semiconductors, and carbon fibre fabrics industries. It is based in Roncello, Italy.
FONTI DI VALLIO S.P.A.

Italy
FERRARI

Italy
TECNO - PROV S.R.L.

Italy
EUROTHERMO S.P.A.

Italy
VISENTIN ANTONIO

Italy

Request for quotes

Create one request and get multiple quotes form verified suppliers.

Only relevant suppliers
Data privacy compliant
100% free

Filters

Results for

Carbonate

Number of results

42 Companies