Results for

Mechanical engineering design - Italy

24 Companies

219 Products

MECHANICAL ENGINEERING OF DESIGN S.R.L.

Italy
E.T.S. SISTEMI INDUSTRIALI SRL

Italy

ETS Sistemi Industriali was established in 1996, thanks to the long experiences acquired in the Services and Contracts. ETS Sistemi Industriali have developed its know-how through realization of complete system. This has contributed to acquire necessaries know-how, technologies and specialized personnel in the various fields of Industrial Engineering. Mechanical, electric and piping design. Following the national and international technical and safety normatives, ETS Sistemi Industriali has today the necessary experience for services dedicated to process monitoring, plant supervision, dedicated non distructive testing (traditional and advanced like Leak Test and Acoustic Emission Test), and to collaborate with customer for Maintenanca, Technical and Ispections Consultations, NDT Inspection Services, Piping and facilities realisation, Clean Room and Labs Maintenance etc. Our main business fields are: Naval-Shipyard, Semiconductors, Aerospace, Military.
ITALGEAR SRL

Italy

Italgear, a leading precision gear manufacturing company, operates from its 5000 m² premises. Our industrial group covers the whole production cycle for making ground and deburred cylindrical gears, spiral and hypoid drive gears and pinions. We primarily produce ground Gleason bevel gears and differential gears and make mechanical transmissions and components from start to finish. We also offer design and co-engineering services.

Website See all products
F.LLI FIORETTI S.R.L.

Italy

Mollificio F.lli Fioretti srl boasts more than 50 years' experience in designing and manufacturing springs and small mechanical parts, constantly searching for ever more sophisticated new technologies and equipment. Many sectors such as mechanical engineering, electronics, military, naval and automotive purchase the company's products and services. Trenitalia supplier.

Website
NEGRINI SRL

Italy

Negrini manufactures hydraulic and mechanical grabs, hydraulic, mechanical and radio-controlled scoop grabs, environmental clamshells, diaphragm wall grabs and dragline buckets. Our technical design office is always ready to take on the most exacting challenges and resolve technical problems by presenting and explaining the best solutions. As required, Negrini calls upon experienced engineers when solutions are needed for complex problems. Products are checked by qualified staff.

Website

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

TECNOLOGIE MECCANICHE APPLICATE S.R.L.

Italy

For many years, T.M.A. srl has been constantly deepening its knowledge in the fields of robotics, aviation, aerospace, naval and civil terrestrial engineering, while maintaining an interest in established sectors such as electromedical, ophthalmic and electronics mechanics. T.M.A.'s services are designed to create ever new projects to show the value of the company.

Website
SYNTAX S.R.L.

Italy

We are a company manufacturing special machine tools, automation and assembly machines. Our goal is to provide technical support to companies through in-depth studies using the latest technology to be applied to production systems. At an operational level, we provide turnkey systems ranging from design through to the complete system capable of satisfying all your production needs. Machine tool construction: We produce machine tools using the latest technology to fully satisfy your requirements Automation: We design and offer automation remedies for your machine tools in order to optimise production costs. Implementing tooling equipment: We can build specific equipment for existing machine tools in your production line. In parallel with the engineering service, Syntax has a service centre composed of highly specialised team of mechanical and electronic technicians.

See all products
GIESSE

Italy

GIESSE GROUP Born in 1960 for the mechanical processing of molds for thermoplastic materials and valve seats for marine engines, from the early seventies the GIESSE GROUP began to establish itself in the textile machinery sector with the design and production of innovative machines for the production of fancy yarns, in particular " chenille". Today the GIESSE GROUP is the most qualified manufacturer of machines for fancy and chenille yarns: modular, electronically controlled and highly energy efficient. The GIESSE GROUP holds international patents for mechanical and electronic components that make its machinery unique in terms of product quality, energy efficiency and reduced production and maintenance costs. A widespread network of technical and technological assistance and a rapid spare parts supply service always guarantee users maximum efficiency and production continuity. Service, consulting and training. GIESSE GROUP proposes itself not only as a supplier of machinery but also as a partner of its customers for: Technical, mechanical and electronic assistance for installed machines. Technological consultancy for the optimization of the use of machinery. Reconditioning and updating of installed machinery in order to keep them in full efficiency. Mechanical, electronic and technological training courses for updating the qualifications of the Customer's staff.R esearch and development.

See all products
GRUPPO PEDERCINI

Italy

Gruppo Pedercini is an industry leader in engineering, designing and manufacturing custom-built industrial plants such as melting, reheating, forge and treatment furnaces. Our emphasis is on R&D aiming at improving the quality, safety and ease of use of our plants. As a result of this, we basically carry out the development of new eco-sustainable and environmentally friendly products, revamping of existing plants, turnkey projects etc. We aim to add value to our customers by delivering the latest technologies and keeping them up to date. We offers complete automation services including PLC software systems, customized software, control panels, equipment board machine, electrical panels cablin, electrical panels Installation, Industrial Electrical plants, Special System plants, Electric-pneumatic-mechanical hydraulic-building designing, HMI/SCADA software, dot.net software. Our service overview: supply of spare spares, revamping of existing plants, mechanical assembly and maintenance, training courses.

See all products
RADIO ACTIVITY SRL

Italy

Founded in 2003, Radio Activity is a dynamic and flexible engineering company, specialized in the design of radio devices and applications. We are members of the DMR Association from which we received the accreditation as DMR laboratory for interoperability testing. By designing our own digital and analog radio equipment, we demonstrate our deep knowledge and solid experience in the field of communication technologies. Thanks to its vast experience and multi-disciplinary skills, our team of engineers designs, develops and continuously offers customized solutions to the Professional Mobile Radio (PMR) market. Our production is entrusted to external partners, specialized in the supply and mechanical assembly of electronic components. Our final QC and inspection is performed by our system design team, abiding by the strictest industry standards. Our First level support is provided by our local technical partners, who can quickly address and resolve any issue on-site and in-person. Our Second level support is performed by our in-house technical team, via a remote control console, to guide on-site personnel in the set-up phase, or while troubleshooting. Our devices have already been installed in more than a hundred systems worldwide, thus showcasing our capabilities in supplying the best solution in a large number of applications, ranging from a simple stand-alone repeater to a nation-wide system.

See all products

BROVEDANI GROUP SPA

Italy

Brovedani Group is a precision mechanics company located in Italy, Slovakia and Mexico, consisting of 3 companies and 7 production units. The Group has advanced manufacturing and control systems for the mass production of technologically sophisticated mechanical components with high standards of quality. The Group’s advanced engineering services develop dedicated product-processes in areas that include the design and construction of custom-built machines with integrated multiple technologies and the management of production lines for outsourced products.
GIMAT SRL

Italy

We design and build systems for conveying, batching, mixing and storing powders, granules, ground materials, and mixtures. Gimat’s engineered systems have been continually enhanced by various improvements over the years and positive feedback from the customers. They have been widely used in several industrial applications, including plastics, chemicals, food, pharmaceuticals and all industries that need to process raw materials in the form of powders or granules. Our Powder Conveyor systems can be divided into: Mechanical Conveyors, Pneumatic Conveyors, Aero Mechanical Conveyors. Mechanical conveyors are available in various types depending on their use, amongst which we have Screw Conveyors, Flexible Screw Conveyors, Shaftless Screw Conveyors and Spiral Rigid Conveyors. We also provide solutions for Powder feeders, continuous or batching units, for Powder mixers and Bulk bag dischargers and fillers.

Product recommendations

China

CNC Machining Stainless Parts in Low Volume

China

China

See more products

SAM ENGINEERING

Italy

SAM Engineering is an excellent partner to help Customers turning their ideas into actual products through the support of the most recent computer technology. The design is made through the aid of CAD and CAM, 2D and 3D systems. The operator uses the appropriate CAD or CAM system according to the project to be realized. The technical department of SAM Engineering can rely on a 3D CAD system and creates machining centre programs both with CAM system and ISO programming. SAM Engineering can count on CNC and FMS machines and a capable workforce, able to satisfy the high standards demanded today by the market. SAM Engineering is able to perform the following mechanical machining operations: Cutting, Boring, Drilling, Grinding, Heat treatments, Milling, Surface treatments. SAM Engineering is also able to lay in supplies of raw materials at competitive conditions.
ACERSO ENGINEERING SRL

Italy

Located in Brescia, Northern Italy’s mechanical manufacturing supercluster region, we specialize in mechanical design and manufacturing services for the heavy industry. We provide you with a full spectrum of mechanical engineering services ranging from the simple redrawing of out-dated and hard to read drawings up to most complex machine design from layout, to basic, to finished engineering. ACERSO ENGINEERING supply a comprehensive manufacturing service of non-standard electro-welded carpentry, high quality forgings and cast parts CNC precision machined as per customer prints and specifications. A wide range of machining processes are available such as turning, milling, boring, grinding, with thermal surface treatments and metal plating.
CAMA SRL

Italy

CAMA srl undertakes design, research and development for technological innovation in the mechanical engineering and home automation sector in general, and the transport vehicle sector in particular (motor vehicles, motorcycles, boats/ships, industrial and agricultural vehicles, trains and aircraft), with particular specialization in the field of metal profiles and seat rails and that of safety in all types of vehicles. It is involved, both directly and indirectly, on its own behalf or that of its customers, in the conceptualization, design, production and marketing of metal profiles and rails in general and particularly for transport vehicle seats. Cama realizes customized rails on specific request of the customers and by working at close contact with him, we are able to give the best solution possible. Cold profiling is a continuous sheet steel bending process at ambient temperature. It helps reduce production times and costs thanks to the capability of producing profiles in large quantities. This type of processing allows the creation of complex, tailor-made and specially designed profiles.
BRIEDA CABINS SRL

Italy

Brieda Cabins, located in Porcia near Venice, is specialized in designing, engineering and production of harbour crane cabins. The company has become a leader in this field thanks to the application of constant R&D and product innovations joint to a long tradition of quality and reliability. All aspects regarding the cabin design, including choice of materials, operative functions, mechanical loads and working environment are carefully analysed and discussed with the customer. Our Know-how have allowed us to supply cabins of high quality, with high respect of both active and passive safety and always with an excellent price/quality ratio. The planning and of the realization of our products and services are subject to the strictest qualitative controls.
DREIP ENGINEERING

Italy

DREIP ENGINEERING specialises in designing automatic and special machinery. We can complete our design work either completely independently, or in collaboration with the customer, developing all the engineering stages in line with current national and international regulations; we deal with Mechanical engineering, Mechatronics, Automation, FEM analysis and Simulation activities.
ECO MECCANICA S.R.L.

Italy

The company ECO MECCANICA S.R.L., is a Manufacturer/ Producer, which operates in the Mechanical engineering - custom work industry. It also operates in the Paper - processing machinery, machining, mechanical design, Paper - processing machinery, and plastic cutting industries. It is based in Lonate Pozzolo, Italy.
O.M.A.R.T. S.R.L.

Italy

The company O.M.A.R.T. S.R.L., is a Subcontractor, which operates in the Mechanical engineering - custom work industry. It also operates in the subcontract mechanical assembly, and mechanical design industries. It is based in Monticello Conte Otto, Italy.
SONZOGNI CAMME SPA

Italy

The company's main business activity has become the construction of station dividers with globoid cam, called Rotoblock®. The Rotoblock® is mass-manufactured, either from the product catalogue or in special versions, and is now synonymous with high pressure station dividers. Available in station or oscillating versions, it is a benchmark product in the family of cam mechanisms.

MECHANICAL COMPONENTS S.R.L.

Italy

The company MECHANICAL COMPONENTS S.R.L., which operates in the Mechanical engineering - custom work industry. It is based in Spello, Italy.
BEST MECHANICAL S.R.L.

Italy
MECHANICAL SOLUTION S.R.L.

Italy
AS MECHANICAL TECHNOLOGY S.R.L.

Italy

Find quotes for

Filters

Results for

Mechanical engineering design - Italy

Number of results

24 Companies