high pressures Italy

... to reduce gas pressure in industrial and commercial applications, suitable for medium and high pressures. Designed to ensure high precision regulation, this device is suitable for use with non-corrosive, pre-filtered gases. HPS 100 is widely used in natural gas, manufactured gas, and LPG installations, both residential and industrial. Product information: HPS 100 is a "direct action" type regulator, membrane-operated with spring contrast. HPS 100 is a "top entry" type regulator, which facilitates...

...Errecinque designs and manufactures a significant number of specific fuel circuit pipes, suitable for diesel, gasoline, liquefied gas (LPG), and compressed natural gas (CNG), thus capable of operating at high pressures as well. The range includes smooth thermoplastic pipes, either single or multi-layered, often combined with other components primarily made of steel. Fuel pipes can be produced...

...High performance mechanical exchanger with lateral or rear inlets/outlets (prepared by the manufacturer) Accommodates the pressure gauge inside the exchange knob for pressures up to 15 bar (1500 kPa) Thanks to the special construction, the pressure gauge is protected against accidental mechanical shocks and impacts The pressure gauge fitted inside the exchanger allows the size of the oxygen bar...

... the "washing" depth desired. Usually, for an inhibition depth up to 2-3 mm, the dose of the product is equal to about 100-150 g/m². Indicatively, after a time between 2 and 24 hours, remove the delayed superficial cement paste, with pressure wash from 120 to 200 bar, displaying the surface gravel. The washing times and pressures depend on the climatic conditions in which the work is being carried...

...also when you are using materials with different thickness in the same working cicle. Machine for various applications, it allows productions with the highest quality. Adjustable time, pressure and temperature Coverings and paddings with thermical and mechanical high resistance Two working plans allow to work in alternated way without dead times THE LUNG MEMBRANE SYSTEM, AGAINST THE RIGID PLANS, ALLOW TO OBTAIN A FIVE TIMES POWERFULL PRESSURE Versione XTP: Special version for high pressures, up to 2 Kg/cm2, 230°C With reinforced structure for high pressure and high temperature...

...Peripheral volumetric pumps capable of developing high pressures relative to modest flow rates and powers. - Brass impeller - Mechanical seal in ceramic graphite - Closed self-ventilated motor - Class F insulation - Single-phase power supply 230V 50Hz with thermal protection and permanently installed capacitor - Three-phase power supply 230/400 V 50Hz with user-provided protection - Maximum water temperature: 90°C Pump body: cast iron Shaft: stainless steel AISI 416 Protection: IP44 Maximum pressure: 6-8-9 bar...

...The ability to shape the finned tube into various geometric forms allows for the creation of helical coil heat exchangers in different sizes, ideal for being integrated into machines designed to condense vapors for reinjection into the process circuit. The DAV Bullets can be made from carbon steel, stainless steel, Ni-Cr alloys, or titanium. The pairing with specific flanges enables their use in applications with extremely high pressures.

...SUITABLE FOR COUPLINGS WITH "M 9/16 HP" FITTINGS 9/16" HP X 9/16" HP (FEMALE) COD. FH409.FF-99 • Designed for pressures of 2,800 bar / 40,000 psi • AISI 316 stainless steel • Female inlets with collars and glands • Flow maximized thanks to the Ø 6.3 mm passage hole • Designed for maximum compatibility • Made in Italy...

...Hydraulic cylinders with end flanges, suitable for long strokes and high pressures. - They never tire, as they are designed for very long "strokes." Hydraulic cylinders with end flanges compliant with ISO 6020/2 standards can be used with pressures up to 210 bar and strokes up to 4 meters!!! - Operating pressure up to 210 bar - Bore sizes from 50 to 200 mm - Particularly suitable for strokes exceeding 2000 mm Conforti Hydraulics. boost your projects #cylinders #hydraulics #ConfortiHydraulics #hydrauliccylinder #conforti #Conforti #hydrauliccylinders #hydrauliccylinders #hydrauliccylinder...

PIOTTI Oleodinamica S.r.l. is a leading company in the field of hydraulics. The company manufactures valves and components for hydraulics. Founded in 1929, it boasts high competence, knowledge, and experience both technically and in production. Now in its 4th generation, the company offers a wide range of products that are continuously evolving through innovative developments, thanks to ongoing in...

Production and distribution of high-pressure hoses and fittings for hydraulics. Production of custom flexible hoses for earthmoving machines and industrial vehicles. Production of hoses for pressure washers. High-pressure fittings for hydraulics.

...COMPACT CYLINDERS FT & XT SERIES Double-acting cylinders with a solid machined body and blackened finish, made of carbon steel, characterized by reduced dimensions in relation to their hydro-mechanical features. They are primarily used for automation where high pressures are required. The variety of mounting options machined into the cylinder body allows for easy and versatile installation.

... up to 10 mm and beyond. Structure of the filter basket: - for holes from 0.5 mm (500μ) to 10 mm, perforated sheet; - for holes from 0.4 mm (400μ) to 0.05 mm (50μ), perforated sheet + Reps mesh. It is possible to replace the basket with another one that has a different filtration grade. All RIZZATO stainless steel filters are manufactured according to international standards and undergo all necessary tests to ensure the declared characteristics (operating pressures, usage temperatures, etc.).

...Cleaner with lubricant for the cleaning of the entire fuel system of all Diesel and Bio Diesel powered systems, including common rail, injector pump, and state-of-the-art high-pressure systems (with high pressures on the injectors). Ideal for vehicles equipped with a particulate filter (DPF). In the tank, it prevents and eliminates impurities, condensate water, paraffin deposits, algae, sludge, and varnish, protecting the entire fuel system from impurities and optimizing engine performance.

... providing great resistance (this is due to the mesh located in their inner part). HYDRAULIC HOSES FOR DIFFERENT PRESSURES AND FLOW RATES The RVS warehouse offers its customers a wide range of Parker-branded hydraulic flexible hoses for every condition of: • pressure • flow rate • temperature The extensive range of flexible hoses and fittings, produced in full compliance with current quality standards, guarantees high performance. At the RVS depot in Turin, you can purchase various types of flexible hoses.

... boiler allows for excellent combustion, stable temperatures, and reduced on/off cycles. The dual-stage burner perfectly adapts to fluctuations in thermal demand and helps reduce emissions during partial load operation. The integrated three-way valve ensures rapid achievement of operating temperature, maintains tight temperature control, and reduces cycle times. Capable of communicating with systems. TEMPERATURE RANGE: 25 - 80 °C HEATING CAPACITY (HIGH / LOW): 515 / 370 kW POWER SUPPLY: 400 V 3ph / 50 Hz HEIGHT (M): 1.62 LENGTH (M): 3.70 WIDTH (M): 1.20 WEIGHT (KG): 2900...

...Designed to meet filtration needs at high temperatures, high pressures, or corrosive operating applications. The FilterONE cartridges are constructed with a filter medium made of sintered microfibers in stainless steel 316L, featuring 2 layers of internal support, 1 layer of external protection, and welded ends. The special construction technology gives the FilterONE high mechanical strength...

...These pumps are designed for applications that require very high flow rates at the expense of medium/low pressures. Given their characteristics, they are widely used in agriculture, large irrigation systems, sprinkler irrigation, water movement, and so on. Flow rates: 0 – 1500 lt/min Head: 0 – 23 m Power: 0.75 – 4 kW Pump body, motor support, and impeller: G20 cast iron Shaft in AISI 416...

... connector solution includes several special features, including: All fluid or gas lines complete with dual isolation valves. Each set of valves are interlocked with the clamping mechanism to ensure ultimate safety levels. A total separation time, including valve closure, of less than 30 seconds is achievable. All components are manufactured in-house by MIB, guaranteeing the quality demanded by the indudstry for such a vital component. Engineered to interface with client’s specific riser buoy and upper turret equipment. Clamping load to suit project needs, catering for internal fluid pressures, ex...

... internally developed a series of solutions and products: - Components and controls that operate locally and remotely. - Systems for the electronic measurement of temperatures, flow rates, and pressures. - Systems for the automatic regulation of the air/gas ratio. - Actuators, solenoid valves, sealing controls. - Communication boards. - Electrical panels & PLCs. - Control panels. ESA is capable of integrating the aforementioned into automation solutions using tested and selected components.

...Zirconium Grain Fiber Disc - Circular Hole. Features and Benefits: Optimal removal at moderate pressures, combined with a long product lifespan and good surface finish. Main Applications: Deburring, weld seam removal, very hard materials. Materials to be processed: Stainless steel, steel alloys, high-temperature resistant non-ferrous materials.

Posa Tubi Flessibili has been operating for nearly 50 years in the assembly, construction, and sale of flexible hoses for low, medium, high, and very high pressures. In terms of supply, Posa Tubi operates throughout Italy, although its logistical advantages in relation to nearby Bergamo, Milan, Trento, Verona, and Vicenza make it competitive and ideal in terms of services, product availability in...

Coaxial valves are completely pressure-balanced. The fluid pressure has almost no influence on the switching behavior. The switching capacity remains constant, and the valves switch securely, regardless of whether they are under vacuum, low, or high pressure. Only the friction of the seal at maximum pressures limits the pressure stages. In the closed state (sealed), the outlet pressure can be up...

... 55 with thermal protection, dry combustion chambers made of stainless steel, double coils that are phosphated and constructed without welds, tested for pressures starting from 600 bar in standard models, and the hoses are specific for high pressures. Ease of use: the assembly and mounting methods are designed for extreme ease of maintenance. All components are easily accessible for any control needs, allowing for more timely interventions.

BULK SINCE 1999 QUALIFIED ISO 9000 MANUFACTURER OF: PROTECTIVE CASSETTES FOR TOOLS AND SUNSHADES IN GRP, BLEED VALVES, MANIFOLDS AND MONOFLANGES, DOUBLE O-RING COMPRESSION FITTINGS. EXCLUSIVELY DISTRIBUTES IN ITALY: HIP (USA) TUBES, FITTINGS, AND VALVES FOR ULTRA HIGH PRESSURES UP TO 150,000 PSI; BIS (UK) SAFETY VALVES, CHECK VALVES, FILTERS,...

... the automotive sector, trucks, work vehicles, and small boats. Our mission is to build high-quality cryogenic tanks that ensure safety and reliability over time. Our facility is also a reference point, with high expertise, for routine and extraordinary maintenance, as well as testing of cryogenic tanks. At HVM, there is an atmosphere of constant innovation in products and services that increasingly represent the high efficiency of Made in Italy.

... treatment, and various chemical reactions. Cavitation is related to the formation and rapid implosion of vapor and gas bubbles in a liquid medium: this phenomenon is usually undesirable, as the rapid implosions of the bubbles generate extremely high local pressures and temperatures, causing damage to the surfaces on which the bubbles implode. However, if cavitation is generated and controlled "on demand," as occurs in the ROTOCAV, many processes can take advantage of this phenomenon, increasing yields.

... characteristics that allow for internal diameters ranging from 2 to 40 mm, operating pressures from 5 to 1280 bar, and usage temperatures from -200°C to +260°C depending on the types, aiming to address the increasingly frequent and complex challenges posed by industrial automation.

... the years, the constant search for new solutions, the use of innovative materials and technologies, and the continuous training of personnel and machinery have made the company a leader in the "float valves and drainage equipment" sector. Today, Rizzo Aquae boasts numerous patents, including the first float for low and high pressures in the "MASTER" series. Among the latest patented creations are...

Comac offers a wide range of floor scrubbers and sweepers, machines capable of tackling any level of dirt, even on large surfaces. All Comac floor scrubbers have the option to adjust the brush pressure, and for tougher dirt, some models can achieve high pressures of up to 180 Kg for greater cleaning power. With the cylindrical brush models (referred to as scrub-sweepers), even small solid debris...