heat treatment Italy

...M.E.G.A.’s forging and heattreatment division is capable of forging fittings (in a closed die) up to 4” 16 kg. The heat treatment furnaces and tanks are all certified to Norsok M650 and ASTM A991 standards and can treat any product that M.E.G.A. produces (large and small forgings, pipes and any other type of part).

... we put all the flexibility and competence that have always been the hallmark of our work. We make customised finned packs for production in batches, dedicated to the machines of our OEM customers and, in general, to data centres, air treatment units for industrial refrigeration, industrial and commercial air conditions and condensing units for refrigeration.

...Gas Nitriding – Surface treatment Quench Hardening / Tempering – Heat cooling process treatment.

...RTOs leverage the ability of a mass of inert material to accumulate heat generated by the combustion process and release it at a later stage. These systems consist of two or more inert masses that alternately function as "preheaters" and "heat recoverers" depending on the direction of airflow through them. The thermal recovery efficiency can reach up to 97%, and the heat produced from the...

... repeatable, one beside the other, without length limits. The temperature of the sealing bars is adjustable from 60 ° C to 250 ° C by a thermoregulator positioned on the caliper. The longitudinally knurled bars and coated with an anti-adhesive treatment are also suitable for welding polypropylene. Model:420 SCT seal length:mm. 420 Seal width:mm. 12 Electrical supply:220 V Power:400 W Weight:1350 g...

...KOVER increases the resistance of plants to the sudden lowering of temperature (frost), and to the excesses of summer heat that cause water loss and dehydration (summer evapotranspiration). This product is able to increase the concentration of specific elements that have a recognized anti-stress action on the inside of the plant, and it promotes the formation of a gas-permeable film...

...Heat treatment OPERATING TEMPERATURE: MAX 1200°C Standard power, size and shape or as indicated by the customer. Complete electrical BOXES with CONTROL and SAFETY systems (thermocouples). Stainless steel casing. Room insulation with technical material REFRACTORY and FIBROCERAMIC. Heating by resistive filament* SPIRAL. VIDEO: LINK...

... dehumidifying plastering cycle (despite the effectiveness of the product, which has been extensively tested over the years, pay maximum attention to the timing of realization of this preventive treatment to avoid loss of adhesion of the plastering cycle. For this kind of application we recommend using green-building treatments based on ammonium salts in aqueous solution, like Sanareg) Impregnations with...

...Slimband Infrared Thigh Band for infrared treatment. Description of the FASCIA INFRARED LIGHT SLIMBAND COSCIA - BODY WARM The Slimband is an infrared band paired with the Body Warm device or compatible weight loss equipment. This Slimband abdominal band wraps around the client's thigh and emits heat through infrared. The heat generated by the infrared penetrates deeply, allowing for a significant weight loss effect. Reference:OV9570...

...such as distension heat treatment, metallic galvanization, chrome plating and other treatments, through our partnership with qualified suppliers with whom we have established advantageous collaboration for many years.

...Nitriding is a process that allows for the surface hardening of steel through the use of nitrogen. For this treatment, Alfa T.T. has 2 furnaces available. The company also performs nitrocarburizing.

...Stainless steel incinerator for the treatment of medical, industrial, hazardous waste, agricultural waste...

Gruppo Pedercini is an industry leader in engineering, designing and manufacturing custom-built industrial plants such as melting, reheating, forge and treatment furnaces. Our emphasis is on R&D aiming at improving the quality, safety and ease of use of our plants. As a result of this, we basically carry out the development of new eco-sustainable and environmentally friendly products, revamping of...

...Rimor provides ventilation systems without transmissions using belts and pulleys, but directly coupled thanks to innovative and reliable cooling solutions for boxes and shafts (air or water) and the selection of the most suitable materials. All Rimor agitators can be made with insulated pads, in any shape and size, to prevent heat loss to the outside while offering certified "custom" solutions.

...The gas burners SIABS are made of metal fiber and feature high-efficiency infrared radiant panels specifically developed for metalworking construction sites. Areas of application: - Shipbuilding industry (drying sheet metal and curing powder coatings) - Foundries and Forging (heat treatment and maintaining temperature of molds and crucibles) - Metalworking sector (Heating of metal components) - Heat treatments for steels - All sectors where heat treatment is required...

...For many years, we have been designing radiant tubes in various profiles such as 'I', 'U', 'W', 'M', 'P', and 'double P'. The purpose of radiant tubes is to transfer heat to the material solely through radiation. Regardless of their shape, the operating principle remains the same: the combustion gases generated by the burner are channeled through the tube, allowing for heat exchange. This way...

... frizz-free effect. Step 1 - Smoothing Shampoo pH 9 - 500 ml Step 2 - Straightening Cream - 500 ml Step 3 - Intensive Mask pH 2.5 - 500 ml Step 4 - Anti-Yellow Treatment - 500 ml Step 5 - Heat Protector - 150 ml Step 6 - Illuminating Oil - 125 ml...

...Regenerative thermal oxidizers, also known as RTOs, are machines equipped with regenerative heat exchangers made of ceramic materials that allow for high thermal efficiency, thanks to their ability to quickly store and release heat. This characteristic enables the creation of systems with efficiencies of up to 96%.

...Systems for industrial refrigeration, direct expansion refrigeration units. Configured plants Compressors Condensing units Refrigeration plants Heat exchangers and ventilation Refrigeration components Air conditioners and heat pumps Installation materials Measuring and control instruments Refrigerants, oils, and glycol Refrigeration cells and accessories Rental...

..." is necessary: heat, fuel, and oxygen. Below a certain minimum concentration of oxygen (Minimum Oxygen Concentration - MOC), fires or explosions cannot propagate. FR Compressors is now a leader in the sale, maintenance, and implementation of nitrogen generators with or without compression systems.

... brands used in the industrial landscape. Specifically, we provide: • hydraulic pumps • cylinders and hydraulic power units • hydraulic valves • high and low-pressure pipes and fittings • high and low-pressure quick couplings • pressure gauges, thermometers, thermostats • pressure switches, transducers • high and low-pressure filters • heat exchangers • custom gaskets • coupling lanterns • anti-vibration joints • gasket kits • lubrication systems • electric pumps • hydraulic locks • electric motors and gear motors...

... the level of impedance (resistance), results in a localized increase in temperature that, at various degrees and intensities, achieves the therapeutic goal of improving microcirculation, reducing the fibrous adipose layer (cellulite), and most importantly, reshaping the connective fibers of the subcutaneous framework of the tissue being treated. The heat stimulates collagenogenesis, leading to an increase in the production of collagen and elastin, substances essential for youthful and smooth skin. The increase in circulation stimulates intercellular exchanges.

... Company who can support you in designing of new galvanizing plants or to improve the performance of your existing plant please do not hesitate in contacting us. Our production : • Galvanizing furnace; • Dryers; • Enclosures on the galvanizing furnaces; • Complete enclosures on pretreatment area; • Aspiration and filtering units for galvanizing fumes; • Pretreatment tanks in PP; • Heat exchangers to heat the pretreatment tanks; • Aspiration and neutralization units for acid fumes; • Heat recovery sistems; • Adjustable height jigging stations; https://www.youtube.

...The air handling unit (AHU) is a small piece of equipment for the simple treatment of air in small environments. It is usually composed of a single chilled water and hot water heat exchange coil, both for cooling and heating, or of a direct expansion coil in which the refrigerant gas circulates. Evaporation takes place in the coil itself within the rooms of use by an air filter and a low head...

... anywhere. Compared to other sterilization autoclaves from Frigojollinox, STERYCOOK can also be used like a regular cooking kettle for boiling, steaming, and simmering. The double-walled design with thermal fluid ensures even heat distribution on the walls and bottom, providing consistent temperature control. Preparing roux, soups, sauces, and more is very straightforward, thanks to the extreme ease with which the system can handle large quantities.

The company SEIT ELETTRONICA, SRL is a Manufacturer/Producer that operates in the induction heating systems, laser marking, and eyewear production machinery industry. It is based in Treviso, Italy.

...The Chemical Nickel deposit has the ability to create extremely uniform technical coatings on geometrically complex parts that cannot be treated with galvanic coatings. Its properties: - Hardness 600-1050 Hv (depending on heat treatment) - High chemical resistance; - High wear resistance. The percentage of phosphorus present affects the surface characteristics: a high content of the element...

... slightest hint of humidity or static electricity. 1. Anti-frizz shampoo, to be applied to wet hair and massaged (250 ml, 1000 ml) 2. Smoothing and detangling mask, to be applied after shampooing and massaged (250 ml, 500 ml) 3. Conditioning fluid to be applied to towel-dried hair without rinsing, which releases an immediate and reliable effect activated by the heat of the hairdryer or straightener (125 ml) Also, check out the video: https://www.youtube.com/watch?v=odhwvl1rCVo...

...degreasing and washing, 3D measurement, sampling with PPAP, tube bending, tube cutting, brazing, welding, surface treatment, and heat treatment. Contact us for more information or send us your RFQ, and we will provide you with the best offer in a few days.

...The AP-Max air heater is a hot water heating system designed specifically for large spaces. The outer structure is made of polypropylene, a lightweight and chemical-resistant material, making it suitable for all environments. The heat exchanger, on the other hand, consists of copper tubes and aluminum fins, which are easy to clean and maintain. The choice of materials and the cataphoresis painting treatment of the heat exchanger make the AP-Max suitable for use in any environment, as they are resistant to corrosion and acids, and are easy to sanitize and dispose of.