carbon products Italy

...Sheets produced with top-quality materials and advanced technologies. Made entirely from bidirectional carbon twill 3k and 6k, processed at controlled temperature and pressure. Max temperature 120°C. UV-resistant epoxy resin, does not yellow over time. Panels are glossy finished on both sides. Manufactured directly by TR Compositi in ITALY. NOT Chinese products!!! Ideal for mechanical parts, drone frames and modeling, automotive and motorcycle accessories, dashboards for boats and ultralights, DIY, etc.

... B1.20.1) and socketweld, as well as SWAGE NIPPLES that are available in all standardised variants threaded, BW, plainend, eccentric. This family of standard products is available in carbon steel, stainless steel, duplex and superduplex stainless steel, nickel alloys, copper alloys, titanium and others. The material can be certified NSF 61, NACE, PED, and Norsok.

...Outdoor storage, suitable for storing a small cistern with a capacity of 1100 liters. Made of 12/10 thick carbon sheet, painted in polyester for outdoor use. The deposit is equipped with lateral ventilation grilles, openeable top, hinged doors, handle with lock equipped with double key and watertight collection tank. Comes with safety stickers. It is the user's responsibility to verify that the products intended to be stored and moved are compatible with the construction material and any painting of the deposit. Stackable cisterns:n. 1 Tank capacity:1100 lt Dimensions (LxPxH):mm. 1350x1660x1810...

...Painting of protective, decorative and anti-carbonation finish, for walls, façades, concrete products, plaster, masonry, natural stones, porous supports in general. Specific for painting industrial works and infrastructure artefacts: bridges, viaducts, large prefabricated, etc. The surfaces of application should be clean, free of any soiling, crumbling and non-adhering parts, or non-absorbent, dust...

...Graphite-carbon elements and anti-friction materials. The company EL.TE. Segmentitalia Sas is the ideal partner for this type of materials. In thirty years of activity, it has always prioritized the excellent quality of the raw materials used to manufacture all its products. Chemical, petrochemical, and mechanical industries require, for their needs, sealing rings and mechanical seals made from...

...Single block ball valve class 800 in carbon steel ASTM A105 with white zinc plating, full passage, F/F ISO 7/1 or F/F NPT threading, Fire safe, anti-static device. Temperature limits: -20° to +160° Vacuum: 10-2 torr...

... increasing demand for seats and insert rings made from thermoplastic and elastomeric materials, capable of providing high performance in terms of mechanical strength, elasticity, thermal resistance, workability, and resistance to substances such as methane, carbon dioxide, hydrogen sulfide, superheated steam, and sulfur-containing hydrocarbons. The production of these components requires extreme care and precision, respecting details such as chamfers, bands, roughness, groove depths, and angles.

... for blades, cuticle pushers, comedone extractors, pliers, tweezers, scissors...) and carbon (micro motor and turbine burs). It has an optimal capacity of 3 liters and a 3-color LED digital display that clearly indicates the operating status. The external structure made of resin is durable and easy to clean, complete with a lid with a viewing window for Reference:SGAF112...

...Bioutleniania Biodisc System. Compact and modular solution, minimal energy consumption. This is the most commonly used series of single-piece devices. The tank can be made, by choice, from treated and painted carbon steel or from AISI 304 stainless steel. The cover in both cases is made of fiberglass-reinforced polyester. Noteworthy is the ease of installation (limited engineering work, factory...

...Carbon black is the reinforcing filler primarily used in rubber compounds, and it is essential for imparting the necessary durability and strength to these products, along with significantly improved performance. In this sector, carbon black is used to provide color, opacity, UV protection, electrical properties, thermal conductivity, and also reinforcement. We offer special blacks of various...

...The radiant panels [RHTP] are special versions of heat exchangers designed to heat objects or products through radiation. Made with carbon steel or stainless steel tubes and longitudinally finned, they contain fluids at high temperatures flowing inside. The DAV FLAT are ideal for all applications where it is necessary to transfer heat statically without air flows, such as in industrial ovens.

...Airlaid cloths, dry paper, size 30x33 cm available in two different grammages: light 55 g/m² or heavy 60 g/m². Why choose dry paper cloths? Because by using air instead of water in the paper production process, you get a thick, absorbent cloth. Airlaid cloths are pleasant to the touch, thick enough and very resistant. The airlaid was created to replace cloth products, offering the hygiene advantage that a disposable product can guarantee. 50 pieces per pack, perforated pack for easy opening.

...The Carbon Footprint, also known as the climate footprint, is a measure used to quantify the extent of greenhouse gas emissions in the atmosphere from a product or an organization. Understanding the magnitude of the carbon footprint of a business organization or the products it produces allows for increased chances of success and profit, benefiting both the corporate identity and the environment...

...Carbon Residue Cleaner. A blend of powerful solvents that dissolve crystallized and hard carbon deposits that typically form inside and outside the engine, causing poor performance. Sprayed at the base of common rail injectors, it facilitates their removal from the engine head. It dissolves carbon deposits inside the turbine, the EGR valve, and the throttle bodies of diesel intake ducts.

...VTKFUL is a leading company in Italy and abroad in the production of soot reducers for wood-fired ovens. Our products are designed to effectively reduce carbon particulate (soot) and unburned materials present in the emissions from wood-fired ovens, ensuring a healthier and safer working environment. Efficiency: Our reducers offer a high reduction efficiency, exceeding 98%, in compliance with...

We are formulators and producers of water-based industrial detergents. Our products are not generic items from a pre-filled catalog, but detergents tailored to the specific production cycle of our clients, starting from established bases. This is to achieve maximum effectiveness with the minimum possible labeling. We supply companies of all sizes, both in Italy and abroad, across various sectors:...

...supply and installation of accessories prototyping custom processing in composite materials refitting of vessels, creation of anti-slip surfaces, production of synthetic rubber flooring with a teak effect (CER-DECK) Authorized Jotun osmosis center. carbon-clear coatings TL Compositi collaborates with major companies in the metal and lightweight alloys carpentry sector in the nautical field and relies on important design and engineering firms in the nautical sector, thus providing complete technical solutions for clients and customization.

... collecting tank where, special deflectors shall reset the speed preventing the ascent. The contaminant is removed drenandolo continuously or in time through the discharge valve. Uses: • For the protection of installations in which circulates industrial or domestic water. • For the protection of closed or open circuits of hot and cold water, cooling systems (in particular of the spray nozzles and the evaporating bodies). • For protection of the gland, the labyrinth seals and clutch rings Carbon mechanical seals for pumps and turbines.

...Tecno Impianti has designed and manufactured the new wet wire drawing machine Mod. TS310-2. It is an evolution of the model TI-310, which was one of the most successful products in the history of Tecno Impianti Srl. This machine can be used for drawing of low carbon wire, galvanized wire, welding wire. It is available also in the 4-cones version, named TS310-4. We can supply production lines complete with uncoiler, coppering baths, spooler. Our sales offices is at your disposal for any additional info you might need.

...The ECAIA carafe is a mineral water ionizer in the form of a carafe. Unlike an electric water ionizer, it does not require any electrical power. Activated carbon particles first cleanse the water of pollutants. Using special ceramics, the water is mineral ionized. Additionally, a small plaque at the bottom of the carafe ensures the correct energetic quality. The end product is harmoniously energized, clean, alkaline, ionized, and antioxidant ECAIA water. More at http://sanusbusiness.com/deu/products/carafe...

...Since dry ice is solid carbon dioxide at -78.5°C, special precautions must be taken. For this reason, it is often not accepted by couriers or airlines. Super Gel -16°C contains a safe and non-toxic salt gel designed to slowly release an extreme temperature for days.

...Thanks to our products, it is possible to manage the storage of hazardous substances in compliance with current regulations. The containers can be made with different structures and materials: carbon steel containers, polyurethane insulated panel containers, and containers with certified EI 120 or REI 120 panels. Carbon steel containers can be painted externally upon request. The certified EI / REI 120 containers are produced with walls made of EI / REI 120 certified panels insulated with mineral wool.

... treatment, the injectors, intake valves (indirect injection), and combustion chamber are cleaned of dirt and carbon deposits by feeding the vehicle specific additives instead of petrol or diesel, all without removing the injectors or disassembling any engine components. The AIR INTAKE treatment is performed by vaporizing specific detergents into the vehicle's air intake, effectively removing dirt and carbonaceous and oily deposits from the air intake system, thereby restoring the engine's proper operation.

... conformity of our products. SELO: CHINA STAMP Mandatory certification for the production and sale of pressure equipment in China, ensuring access to the Chinese market. In particular, we present a complete range of tanks, both vertical and horizontal, with capacities ranging from 0.5 to 100,000 liters and more. The pressure range is from 0.5 Bar G. to 100 Bar G. and more, depending on the capacity...

...The accumulation table is a piece of equipment designed to facilitate the accumulation, storage, and alignment of parts. It is made with a structure in A304 stainless steel or painted carbon steel, depending on the customer's specifications. The structure is equipped with a series of modular belts that, with the help of appropriately sized side rails, allow for the movement of products. It is a...

...AND COCKTAIL BARS. USABLE WITH 4KG BIBS - CANS - SILOS - CUSTOMIZABLE, WITH ACCOMMODATION INSIDE THE MACHINE. ELECTRONIC CALIBRATION, AUTOMATIC WASHING, WATER CONNECTION OR CAN WITH ACTIVATED CARBON FILTER LOCATED INSIDE THE MACHINE. PRODUCT LABELS BACKLIT AND EASILY REPLACEABLE. STAND-BY WITH MAINTAINED OPERATING TEMPERATURE. DISPENSING COUNTERS - INTERNAL BUTTON PANEL FOR MAINTENANCE/PROGRAMMING. MULTILINGUAL LCD DISPLAY WITH TEMPERATURE INDICATOR, DATE, SERVICES, AND ACCESSORIES. OPTIONAL: MANAGEMENT SOFTWARE...

...Supply, installation, and maintenance of FRP products NDT inspections, assessments, and checks for composite materials...

...GRAFSHIELD ™ industrial high-temperature hard and soft felts control radiant heat, thermal conductivity, and convective heat with compact, lightweight, and durable insulation components. They are specifically designed to help customers improve their performance and profitability by reducing their energy and maintenance costs. The consistency of the products and the consistently high quality ensure that our customers always receive the absolute best insulation materials for their needs.

...We create verandas with top-quality products featuring thermal break profiles. - Double glazing from 18 mm up to 40 mm with argon gas and profiles no longer made of aluminum but of carbon, improving thermal performance. -...

Metallurgica Locatelli spa, a steelworks operating in the field of metallurgy and metalworking for the processing of wire, common steels, and drawn iron and steel, has over time specialized in the drawing of low carbon steel wires, offering a wide range of drawn products: black and white annealed wires, helical wires, eyelet wires, galvanized wires, metal wires, hot and cold drawn metal; shiny...