high temperature lubricants

... expertise – solve almost any application problem. Special and high-performance lubricants (See application examples) High-performance silicone casting, adhesive, and sealing compounds (Also suitable for the food sector) Special products and chemical specialty products for high voltage and electronics (Dioxin-free in case of combustion) Consultation on dosing and filling technology in connection with our products and your systems...

... - T.T. Thermal Lube is an extreme temperature grease-type lubricant, which contains no metallic solids or silicone fluids - Compounded reactive polymers maintain a stable viscosity over a wide temperature range from 20°C to 320°C (68°F to 608°F) - High temperature applications to ball and roller bearings where other lubricants fail due to gum and carbon deposit formation...

...Premium high-temperature oils. Fully synthetic lubricants formulated with PAO/ester oils and special additives for extreme operating conditions in temperatures up to approx. 250 °C, non-toxic and miscible with mineral oils. Recommended for the lubrication of double belt presses, film stretching machines, timing and conveyor chains, slide rails in lacquer drying furnaces in the automotive sector or the mechanical engineering sector as well as bearings and gears at medium loads and extremely high temperatures. High performance lubricating oil:High temperature...

...Our product family HeBoCoat® includes a wide range of different boron nitride coatings based on water or ethanol. These are particularly suitable for use in high-temperature applications and are in greater demand than ever in new application areas.

... resistance to chemical attacks, especially in humid environments in conjunction with acids or alkalis. SILCAWOOL 120 fibers can also be supplied as loose wool and contain lubricants that outgas when heated. Paper made from SILCAWOOL 120 fibers contains binders that escape during heating. SILCAWOOL 120P and 130 mats are needled on both sides and have high tensile strength. The mats do not contain any organic binders. SILCAWOOL 120P and 130 fibers are processed into boards and paper.

...ELKALUB GLS 595/N2 is a high-temperature grease based on perfluoropolyether oils (PFPE). It is primarily used for lubricating guides as well as rolling and sliding bearings in the temperature range of -40 °C to +250 °C. The excellent temperature stability allows for long relubrication intervals or use as a permanent lubricant. ELKALUB GLS 595/N2 exhibits outstanding chemical resistance to acids...

... base oils and a thickener made of polytetrafluoroethylene. They are used for the long-term lubrication of roller and plain bearings that are subject to high thermal loads. Castrol Braycote Inertox high-temperature greases are used under aggressive environmental conditions and are resistant to inorganic and organic acids and alkalis, even in vacuum systems and clean rooms where a low evaporation rate of the base oil is required. Product number:1854741 Container size:1 Product group:Industry...

...Dura T Series, is a high performance hydraulic system oil which is suitable to use in wide temperature range. It can be used in all types of construction equipment and hydraulic system even under high pressure due to its special additive package in its content. It provides superior protection in hydraulic systems under extreme operating conditions. ...

... with a tendency to seize up, e.g. V2A, V4A and high-temperature steels Advantages and benefits Excellently suited for preventing seizing and binding Highly effective against corrosion affects Free of lead compounds, sulphides, chlorides and fluorides For best adhesion, clean the threads and sliding surfaces from dirt and other lubricants. Best way is to clean mechanically first and then with OKS...

...Hammer Grease is meticulously formulated using a semi-synthetic base oil and a lithium complex soap thickener, imparting excellent resistance to melting at elevated temperatures. Additionally, it features solid additives such as copper and molybdenum disulphide, complemented by a unique EP (Extreme Pressure) additive that endows it with exceptional anti-seize properties, particularly in demanding high-temperature working conditions. Available in:180 Kg, 16 Kg, 15 Kg, 14 Kg, 4 Kg, and 1 Kg Item Code:VI9-3109...

...SKF LGWA 2 is a premium quality mineral oil based, lithium complex grease with extreme pressure (EP) performance. LGWA 2 is recommended for general industrial and automotive applications, when loads or temperatures exceed the range of general purpose greases. Excellent lubrication at peak temperatures up to 220°C (430°F) for short periods Protection of wheel bearings operating under severe conditions Effective lubrication in wet conditions Good water and corrosion resistance Excellent lubrication under high loads and low speeds...

...It is red colored grease containing high quality mineral oils with calcium soap. It is developed to be used in systems in which water and moist are inevitable and it also has a wide range of application areas. It provides quick and e ective lubrication in various application areas where operating temperature is not high. • It is recommended to be used in grease lubrication processes of ball and...

...Inherently strong oxidation resistance anticipate gumming and drop accumulation at top temperatures. Because of the high natural VI of the base fluid and low pour point, the viscosity temperature behavior allows for a very wide operating temperature range. Hydraulic Oil ISO 68 is recommended where there could be accidental fluid loss into the environment or where surface water contamination should be avoided.Application areas cover industrial, forestry and abyssal and decidedly in adaptable equipment. ...

...-Ion * Battery life of 35 minutes at maximum speed * 1 battery charge empties approximately 12 x 200-liter containers Features & Benefits * BLDC motor with high efficiency up to 70% * Continuously adjustable * Long battery life * Automatic shut-off in case of overload * Advanced quick-release system * The maximum flow rate is a determined value measured with a test stand and tested with water at a medium temperature of approximately 20° C.

... dimensions. The mzr-4605 targets applications in industrial production and process technology. The pump has been designed for continuous delivery and discrete dosage of water, watery solutions, solvents, methanol, oil, lubricants, adhesives, inks and paints as well as other high viscosity liquids. Advantages High dosage precision precision CV < 1 % at low volumes High differential pressures...

... - Fuel consumption measurements - Running losses tests - Endurance tests - Climate tests - Transmission and drivetrain tests - Acoustic tests - Correlation measurements - R&D investigations - Hybrid and electric vehicle tests are met by the robots with extremely high reproducibility in the temperature range of -10°C to +50°C. As an additional application field, the AUTOPILOTS can be complemented by steering systems and thus used for free driving tests on test tracks or flat belt test benches.

...OSKAR S M-800 is especially formulated for mouldings with high exoterm temperature or preheated moulds in polyester, epoxy, aluminium or nickel. lt contains a mixture of high quality synthetic waxes and lubricants, to provide an outstanding heat resistant mould protection and easy release of finished parts. ...

... vaporization. Almasol® grease is optimal for long-term use. Its resistance to high temperatures reduces the frequency of replacement and the amount of grease lost. • A thick grease composed of rust and oxidation inhibitors that ensure optimal protection • Does not melt • Resists oxidation and evaporation • 1251 (NGLI 1) is suitable for centralized lubrication systems...

... (tropics, salt mist) - Resistant to most solvents, lubricants, and coolants - Fluoresces under UV light for easier inspection - Wide temperature range (-60 °C to +200 °C) - Can be safely soldered without the release of toxic gases - Resistant to mold and UV light The silicone can be applied with a brush, by dipping, or with a spray gun and dries at room temperature after at least 2 hours. After...

... protection for your robots. TIFFON-R is recommended for severe applications with high temperatures (up to 1200°C) or significant wet splashes (pouring – steam – water…). It is particularly suitable for Magnesium or brass. TKS-ALU is perfectly suited for the mechanics of small robots, where flexibility of the cover is desired. High temperature: Vapors Lubricants: Radiant heat Molten metal: Foundry...

...Easy-to-process, abrasion-resistant filament for printing food-compliant parts in blue The tribofilament iglidur® i151 is suitable for printing components with high wear resistance, as the material is enriched with solid lubricants. It has been specifically developed for use in the food and packaging industry: the printed components comply with food safety regulations according to FDA and EU...

...Premium heat shrink tubing fabricated from modified fluoroelastomers. Abrasion & chemical resistant to fuels, lubricants, acids and solvents at high temperatures which makes it suitable for many varied applications. Shrink Ratio 2 1 Operating Temperature range 55°C to 200°C ...

...,quantitative filling of coating, solvent, chemical raw material Features: The system uses PLC, touch screen, safe and reliable Filling nozzle and pipe use quick coupling, convenient for removing and washing Automatic 2-shift filling with high accuracy The nozzle automatically lifts when reaching the target filling amount Gross or net filling mode is available Be able to set and store...

...Antioxidant & speciality lubricant additive packages for industrial speciality applications such as H1 incidental food contact approved lubricants, 8000 hour synthetic compressor oils, ashless hydraulic oils, gear oils, automatic transmission fluids, engine oils, high temperature chain oils, vegetable oil based lubricants, EU Ecolabel compliant lubricants, Marine Environmentally Acceptable Lubricants (EAL) ...

...Application areas/qualities: BAKERY LUBRICATION OF FOOD CONVEYORS HIGH TEMPERATURE RESISTANCE FOOD RELEASE AGENT CONFECTIONERY... Morisset Oil Mill specializes in the production of custom food-grade lubricants and collaborates with numerous players in the agri-food sector, ranging from small and medium-sized artisan businesses to recognized industrial companies. We produce lubricants based on...

...You will find all lubricants for your machines and systems with us. Hydraulic oil, industrial gear oil, bed or slideway oil, compressor oil, oils for food technology Multipurpose greases, high-temperature greases, greases for food technology, PTFE greases...

...For industrial pastries and baking High-temperature food release oil. Due to its excellent oxidation resistance, FINATUROL HT prevents the formation of deposits, thereby reducing cleaning frequency. It extends the lifespan of equipment and mold coatings. FINATUROL HT significantly reduces oil consumption (up to 40%) compared to traditional release agents (vegetable or white mineral oils). Thanks...

... Material:Cassette plate, roller shoes Rail body:aluminum, not anodised Raceways:non-corrosive steel Rollers:non-corrosive bearing steel, full needled Operation range:High vacuum 10-3 to 10-7 mbar Operating temperature:-20 °C to +80 ° Maximum speed:1 m/s Maximum acceleration:5 m/s2 Mounting position:Any Lubrication:Lifetime-lubricated with high-vacuum suitable grease, maintenance-free...

...Rolled composite plain bearing | Maintenance-free | Steel / graphite bronze | With embedded solid lubricants GAP-MET®/S is a maintenance-free composite plain bearing. However, oil or grease lubrication is possible. High load capacity and strength, for all slow movement types, suitable for contaminated environments, no moisture absorption, good chemical resistance. For technical details...

... range is expanded (from -30 to +80 °C); upon request, this can even be further increased. Additionally, the new stainless steel axes can be used with lubricants that meet FDA requirements and are washable with high-pressure water. Therefore, they are recommended, for example, for adjustments of widths, heights, and lengths in packaging machines in the food industry.