heat exchanger tubes

...The product range includes heat exchanger tubes as seamless drawn smooth tubes in various copper alloys across all relevant dimensions.

...Fine Tubes leads the manufacture of precision tubes required in the fabrication of shell and tube heat exchangers. Our heat exchanger tubes are used for the cooling, heating, or re-heating of fluids, gases, or air in a diverse range of industries. Alloys Fine Tubes heat exchanger products are produced as seamless, welded or welded redrawn tubes in the following materials nickel alloys, stainless steels, duplex, super duplex. Please note that we have a minimum order value of £10,000.

... THROUGH THE TUBES, OTHER FLUID FLOWS OUTSIDE THE TUBES BUT INSIDE THE SHELL AS PARALLEL OR ACROSS THE TUBES. SO, HEAT IS TRANSFERRED OVER TUBE SURFACES. IT CAN BE PRODUCED AS COPPER TUBE, BAFON TUBE(CU-NI), STAINLESS STEEL AND STEEL.

... extreme temperatures and pressures, making them ideal for use in heat exchanger systems that require consistent and safe performance. Whether in the chemical industry, energy generation, or other sensitive areas – our safety heat exchanger pipes provide the reliability you can count on. Each pipe is precisely processed and tested to the highest quality standards to ensure maximum safety and efficiency.

... coefficients on the primary and secondary sides of the heat exchanger, such as in a water/water heat exchanger. The compact finned tube design is the right choice when the heat transfer coefficients of the media used differ significantly, for example, when cooling oil with water. Low and high finned tubes represent a hybrid form of the two previously mentioned options and allow for further optimizations.

... rapid temperature exchange between the liquids is achieved in a very small space. No cleaning or maintenance required Another advantage is the encapsulation of both liquids from environmental influences. There is practically no cleaning or maintenance effort due to pollution from the environment. The coaxial heat exchanger also does not require any seals that require maintenance...

As Mekanik Boru Endüstriyel Sistemler Sanayi ve Ticaret A.Ş, we would be pleased to fulfill your requests regarding the following product groups with delivery. - Water, Gas, Boiler, Natural Gas, Fire, Construction, Ship Pipes - Spiral Welded Steel Pipes, Inner Epoxy and Outer Epoxy & Polyethylene Coated, in desired thicknesses and lengths. - PE Coated Steel Pipes, - Certified Steel Drawn - Seamle...

...Finned tube heat exchangers [FTHE] have tubes with transverse fins to enhance exchange efficiency by increasing the effective heat transfer area between the tubes and the surrounding fluid, which is usually a gas such as air or process gas, while gases, water, steam, or oil can flow inside the tubes.

...With our decades of experience, we are specialists in the production of counterflow heat exchangers, parallel flow heat exchangers, and coil heat exchangers in various designs. Heat Exchangers ACB manufactures and repairs a wide range of heat exchangers, such as plate heat exchangers, copper coil heat exchangers, evaporators, gas preheaters, shell and tube heat exchangers, U-tube heat exchangers, recuperators, economizers, finned tube heat exchangers, oval tube finned heat exchangers, and much more. You can receive our heat exchangers with rolled or welded tubes.

...Tranter manufactures heat exchangers for the following applications: - Power plants - District heating - District cooling - Thermal storage - Flue gas cleaning - Heating, ventilation, air conditioning / HVAC - Marine - Chemical - Geothermal Tranter heat exchangers have one thing in common - heat transfer through plates instead of tubes. A turbulent flow at low flow rates generates high heat...

...We manufacture bundle heat exchangers for use in our own facilities as well as in external facilities. In addition to heat exchangers with metallic tubes, we also produce heat exchangers with carbon tubes for highly corrosive liquids and gases. These are individually installed with sealing rings in rubber-coated steel tube plates, allowing each tube to expand freely. This eliminates the need for sealing the lower tube plates with a packing gland, which would have to accommodate the expansion of the entire tube bundle.

...Bundle Heat Exchanger Construction Features • Removable tube bundle • Materials: Inner tubes: CuNi10Fe Water chamber: Red brass, seawater resistant • Exchange areas from 0.15 m² to 5.79 m² • Inner tube dimensions: 6 x 0.5 mm • Tube side 4-way Conditions • Design pressures: Shell side: 16 bar Tube side: 10 bar • Design temperatures: -10/120°C • Without type testing and without CE marking • Acceptance according to PED 2014/98/EU...

...The Barriquand Shell & Twist® heat exchanger is specially designed to address various issues related to fouling, thermal performance, and mechanical fatigue. - Vortex effect that limits fouling at the wall - Improved internal and external heat transfer coefficients - Limited internal fouling of the tubes - Optimized cleaning phases (CIP) - Reduced mechanical fatigue, with the shapes given to the tubes allowing for a "bump-to-bump" contact, resulting in a rigid bundle without baffles and unsupported straight tube lengths.

...The spiral tube heat exchanger essentially consists of a shell and a spiral tube bundle. The ribbed tubes are integrated into a spiral within the shell, creating a long thermal path. Spiral-shaped ribbed tubes generate high turbulence, which helps reduce fouling. The bundle tubes can expand optimally. Flow rate: 1-300 m³/h Operating pressure: 16-40 bar Connections: 1¼"-DN 150 Recommended max. temperature difference: 150°C Materials: 1.4401 / Titanium...

...The spiral tube heat exchanger essentially consists of a shell and a spiral tube bundle. The tubes are bent in a spiral shape and are installed as a spiral tube bundle within the shell. The heat exchangers are made entirely of stainless steel. Due to the robust fully welded design, pressures of up to 120 bar are permissible. High temperature loads of up to 400°C are possible. High temperature...

...Schräder offers not only exhaust gas heat exchangers but also the SWT, a heat exchanger specifically designed for flue gases with smooth tubes. This allows for the optimal utilization of the high condensation heat from the flue gases. The aligned arrangement of the register tubes ensures an extremely low flow resistance. As a result, the installation of an additional smoke extractor is often unnecessary. Generously designed access openings facilitate easy cleaning of the register: it does not need to be removed from the SWT housing. High-quality stainless steel V4A guarantees a long service life.

...Air-Cooled Condensers - Single Pipe Heat Exchangers - Cooling Systems for Your Requirements MODEL DESIGNATION MASH, ALEX, A-PIPE About this Product Air-cooled condensers are manufactured as products of various designs and custom configurations. The air-cooled condenser is part of the cooling systems. In direct dry cooling, steam from the steam turbine flows through air-cooled finned tubes. The condensate does not come into contact with the cooling air.

...Our rectangular heat exchangers can be designed with smooth, finned, or louvered tubes. They are particularly used in heat recovery for flue gas, exhaust gas, and air applications.

...Exchanger for fluid processing...

... flows through the tubes under the influence of gravity. Heat is transferred from the jacket side through the tube wall, causing the more volatile fraction to evaporate from the liquid film. Figure 1 shows a falling film evaporator as a co-current apparatus, where vapors and liquid flow from the lower part of the evaporator into an evaporation vessel. Material: Stainless steel, carbon steel, titanium, Hastelloy...

...The shell and tube heat exchangers from N-thalpie GmbH are a commonly used type of heat exchanger employed in various industrial processes to transfer heat between two fluids. They consist of a bundle of tubes arranged within a shell. The operation of a shell and tube heat exchanger is based on the principle of direct heat exchange between the two fluids flowing through the tubes and the shell. One fluid flows through the tubes while the other fluid circulates around the shell.

...The special feature of the heat exchanger models is the use of S-helical mixing elements in the product space tubes. These prevent fouling on the inner wall of the tubes by continuously mixing and re-layering the product mass. This effect occurs even at low Reynolds numbers. There are various ways to integrate helical type mixing element chains into the product space tubes: - Inserted...

...The CSB steam boiler enables future-proof low emissions in accordance with the MCPD Directive (EU) 2015/2193. — Large performance range from 300 to 23,600 kg/h for pressures from 0.5 to 16 bar available — High efficiency thanks to integrated economizer and helical heat exchanger tubes — Flexibly usable with various fuels and as multi-fuel combustion (oil, natural gas, biogas, up to 20% hydrogen...

... mm Operating temperature 200°C to + 600°C Operating pressure 3.0 BAR The FLEXIBLE COMPACT TRANSFLUID heat exchanger has been developed to provide maximum exchange surface in minimal space and with reduced weight. Its principle is to allow the heat transfer or refrigerant fluid to circulate at high speed to optimize the exchange coefficient, with almost no pressure loss, through the winding. Reference: D13200...

... exchanger tubes are designed for heat transfer and are generally used in heating, cooling, ventilation, condensation, and evaporation processes. HOLLOW BARS (HB). These are thick-walled seamless tubes made of stainless steel used for mechanical purposes.

...Pure media must remain uncontaminated. That’s why we manufacture the DTS heat exchanger for these media. DTS stands for Double-Tubesheet, which is the key design feature. This design prevents contamination of one medium by another due to a leaking weld. If a weld is defective, the respective medium will visibly leak out without contaminating the other medium. The heat exchanger tubes are seamless...

...The heat exchanger is a component in which an exchange of thermal energy takes place between two fluids at different temperatures. In general, exchangers are open systems that operate without exchange of work, i.e. they present a constant flow of matter and a constant temperature distribution in steady state conditions. For this sector, our company deals with the production and sale of copper and...

...Refra heat exchangers for liquid can be designed and manufactured to fully meet customer needs. Super flexible options allow Refra engineers to select the optimal circuit arrangement for required capacities, providing the best possible unit performance. The coils can be designed using various diameter smooth copper tubes which extends the power selection options. Assembled with aluminum or copper fins and aluminum, galvanized or stainless steel frame with Aqua-Aero anti corrosion protection. Coils are suited for small to high capacity commercial or industrial refrigeration systems.

...The flat tube heat exchanger features oblong tubes that provide lower pressure drop, reduced dead space, and greater exchange efficiency compared to exchangers with circular tubes.

... refractory lined, and typically have tubes that can handle dirtier gasses than in the power generation industry.Applications that would use a watertube waste heat boiler are typically refinery processes such as: -Fluidized Catalytic Cracking,-Coke Calcining,-Sulphur Recovery...