hardened sheet metal

...12.271 Type: Bystronic Punch – RFA Angle: 85° Height: 175.00 mm Resistance: Max 50 T/m Steel: 1.2312 Hardened Radius: R1.00...

...Embossing dies, also known as double embossing dies, with upper and lower parts for raised or recessed embossing of sheets. The thickness of the sheet to be embossed is of great importance for the production of these embossing dies. Based on these specifications, the movement play between the upper and lower die is designed. The parts are appropriately hardened and delivered in a ready-to-use condition. For manufacturing, we take the specifications from your drawings, sketches, or data.

...• Cutting edges • Cutting edge hardness 56-58 HRC • Cutting edge additionally induction hardened • Adjustable screw joint • Plastic-coated handle • Made of tool steel, forged, oil-hardened Length in millimeters: 250 Weight in grams: 390...

... < 0.015 mm Hardened and ground shafts and gears Clearly arranged control panel with a large lever for easy speed selection Transmission via hardened and ground gears, lubricated by oil bath Handwheel with adjustable micrometric feed Distance between centers: 1,000 mm Height of centers: 205 mm Machinable diameter over the bed: 580 mm Spindle bore: 52 mm Spindle Morse taper: CM 6 Tailstock Morse...

...STAINLESS STEEL 1.4301, 1.4401, 1.4541, 1.4845, 1.4016 quality matte, glossy or satin-finished stainless steel sheets CONSTRUCTION STEEL AND CARBON STEEL S 235 JR, S 355 JR, Strenx 700, Strenx 960, Strenx 1100, Hardox 400, Hardox 500, Hardox 600 Water-hardened spring steel (CK 45, CK 67, CK 75) Dry-hardened spring steel (CK 45, CK 67, CK 75) and 1.4310 stainless steel spring steel ALUMINUM Almg3 5754, 5083, 6061, 7075 aluminum sheet series Copper and brass sheet plates...

...Hot-rolled and acid-cleaned sheet metal is refined through special processes. By means of reversing or tandem rolling, it achieves the desired thickness. At this stage, the sheet is hardened but can be shaped through continuous or batch annealing. Tempering is used to improve the mechanical properties. Quality control is ensured through testing, and the tempered sheet is shipped according to...

...With full or partial thread and scraping groove Thread: Full thread, partial thread Thread end shape: C, F, R Dimension range: ST 2.2 mm to 6.3 mm Lengths: up to 70 mm Groove: Scraping groove Head design: according to DIN, ISO or customer drawing Grades: Hardened or tempered Surfaces: Galvanically zinc-coated, zinc flake, inorganic surfaces, phosphating...

... the classic treatment of reinforcing bar passivation, preparatory to the pouring of castable mortar UNNECESSARY, provided that not too much time passes between the white metal cleaning operations and the castings of pourable mortar, at the risk of new oxidative processes being triggered. Thus, only in the event that long exposure times are foreseen between the bar-cleaning operations and the...

... possible for the assembly of the individual parts. Various surface coats for the individual parts can be supplied as well as finished bearings: brass which is uncoated or nickel plated; steel and stainless steel which is uncoated, zinc plated or nickel plated. All bearings are available lubricated or unlubricated. Structure DLG100 axial ball bearings consist of sheet metal housing, two hardened rings as well as hardened precision balls. Due to their structure, we refer to them as an encapsulated, full ball design.

...The 4 Roll Plate Bending Machine is one of the hydraulic roller machines used in the industry for bending thin or thick sheet metal plates at the desired inclination. This machine is ideal for forming full circle, semicircle, conical, oval, and radius shapes. Design and Structure Equipped with an advanced design, the 4 Roll Plate Bending Machine has a sturdy frame and hydraulic safety chuck that allows easy removal of part roller settings from the control panel. Furthermore, all rollers are hardened, which increases the durability and longevity of the machine.

... and other objects into the bearing! The brake is double hardened for the plate. Exceptional design in which the brake does not rest on the bottom of the container! The wheels can be used for both metal and plastic containers. The mounting plate is standard - 110 x 140 mm, with a bolt spacing of 80 x 105 mm.

...Sheet metal processing from prototype / single part through pre-series to small series. We flexibly manufacture your sheet metal parts and precision sheet metal parts from steel, hardened steel, stainless steel, and aluminum up to a size of 3 x 1.5m with a pressing force of up to 200 tons. Laser processing: up to large format 3 x 1.5m Bending / edge bending: up to a component length of 3.1m and up to 200 tons of pressing force.

... allows for the production of cooling channels and other holes with the smallest tolerances and the highest precision. This is applied, among other things, in electrode arms or connection pieces. Another advantage is the processing of hardened steel and carbide components with our CNC wire EDM machines.

... and to the right * Head rotation locks at 45° – 0° – 45° * Vise with anti-burr device * Electric pump * Chip breaker * Head locks * Vertically hardened and ground slide * Rod lock up to 1 m * Rod support up to 1 m * Operation key * Operating manual for use and individual representation of spare parts * Frame made of sheet metal * Function: Starting the cutting cycle via start push...

... Reference: 9247 Total Length: 250 mm Jaw Length: 30 mm Jaw Material: High-quality CR-MO steel Hardened Jaws: Induction hardened HRC 60-62 Cutting Capacity in Steel: 1.2 mm Cutting Capacity in AISI-304 Stainless Steel: 0.7 mm Cutting Capacity in HRC-40 Stainless Steel: 0.6 mm...

...Cast iron table and foot bases Large table facilitating the command of sheet metal by operator Cutting lever made of low carbon steel for the purposes of flexibility and stability Mechanical pressure system which prevents sliding of sheet metal during cutting operation Mono-block lower knife made of air hardened steel (spk-2080) Front set-square appropriate for angle sheet metal cutting and millimeter set-square appropriate for vertical cutting...

...round, 3.0255, rolled, work-hardened, re-annealed, 1/2 hard, EN 573/EN 485 - Shape: perforated sheet material: EN AW-1050 (Al99,5), 3.0255 Type of manufacture: rolled Condition: work-hardened, re-annealed, 1/2 hard Surface finish: Mill-finish Standard: EN 573/EN 485 eClass 9.1: 35020503 UNSPSC 11.2: 30102506 Dimensions: Thickness (mm): 1.5 Length (mm): 2,500 Width (mm): 1,250 Hole...

... side rolls - Hydraulic balancing system - Compliant with CE standards - Hydraulically operated upper roll cover - Induction-hardened shafts - Mobile electric control panel - Conical opening and closing via the control panel - The status of the lower rolls is easily readable with two digital displays - User manual...

...This nail is ideal for fastening sheet metal to stone, concrete, and masonry. The domed head provides an attractive appearance. Domed head, salt bath tempered, galvanized, 90° bending angle Application area Fastening sheets and cladding directly into stone, concrete, hardwood, frame, and masonry. Note Please wear safety glasses. Head shape: Domed head Thread type: None Hardened: Yes Surface: Blue galvanized Material: Steel Packaging type: Box...

...The Modellrange ECONOMIC is made of durable sheet steel. It comes with adjustable media consumption, a blast media collection bin and a sieve to separate blast media from contaminations. The cabinet has two lateral openings with sealing sliders for rod materials. A perforated metal plate with enforcements. The system has a sectional door that opens the complete workspace. The Cabinet comes with...

...250 sheet metal screws 5.5 x 50 mm - hardened steel, galvanically zinc-coated - Philips - PH3 - DIN 7982 / ISO 7050, with tip for optimal screwing behavior, good corrosion resistance due to galvanization...

... The benefits of the RIVORM® HR clinch nut one nut for all sheet metals up to 4.5 mm cost-saving due to fewer variants high-strength, press-hardened and hot-stamped steels very good torsional strength regardless of metal strength high pull-out force The benefits of the RIVORM® TR rivet for fitting ties and springs fully automated processing possible in the subsequent composite tool can be applied universally for different assembly jobs, such as fastening electrical control units, or other plastic parts, simply by clipping them in...

...The 4-roll plate bending machine allows for initial feeding - bending - final feeding in a single pass. Fully hydraulic machine for reduced maintenance and high efficiency. Hardened and ground rolls. Positioner for automatic production of circular or polycentric shells, step-by-step management with fixed rotation speeds, clamping, and sheet metal bending; storage memory of 100 programs with 30 steps each. Bending without flat parts, even on small diameters. Automatic shoulder opening.

Five reasons to choose BASEDO STEEL: Know-how: We understand the specific situation of steel processing companies. No matter how high your requirements are; and no matter how diverse the materials and dimensions are: We take care of it. Exotic materials are particularly no problem for us. Service: In our modern warehouse in Düsseldorf, we have numerous materials on site. With our high-performanc...

...Precisinox is a company specialized in the trade of stainless steel items. The firm, located in Ciserano, in the province of Bergamo, offers a wide selection of products such as thin stainless steel strips, tempered stainless steel strips, raw strips, carbon strips, and wire for springs. It also carries out sheet metal shearing, cutting, and edging work both for its own account and for third parties. Precisinox is a specialized dealer of Alleima/Sandvik.

...Hardened and Ground Press Brake Tooling manufactured to a high specification. Standard Euro Tooling on Next Day Delivery. Special Tools Designed & Manufactured. Press Brake Tooling manufactured to your specification up to 10 metres long. Press Brake Tool Refurbishment...

... tolerances through our pinch pass line for annealed and hardened & tempered materials. This enables us to meet all your needs. Our customers come from various sectors and industries, including automotive, white goods, construction, and electronics. We supply steel for clutches, washers, machining & press production connections and welding parts, fasteners, fine blanking stamped components, shims for...

...and texts. Our technology is also in demand in non-ferrous metal processing (copper, brass, etc.). We cut cleanly, precisely, and without exposing the materials to thermal effects, thereby preventing deformations, porous, and hardened cutting edges.

... welding, bending, and cutting. Musal Metal also provides professional services in both supply and workshop operations for the special alloy steel type Hardox 500, ensuring high technical standards. Hardox sheet is not just any product. Therefore, it is neither correct nor efficient for an ordinary company or personnel to process this special steel sheet. Weldox steel is also a special type of steel used in heavy industry that requires advanced technology. Our company always has Weldox steel available, and you can also receive workshop services whenever you need.

Welcome to Poppler Tools! We supply new punches and dies for press brakes in all designs and materials as per your requirements. We also manufacture copy parts or partial pieces, which can be adjusted or completed to fit a set. We provide surfaces that are planed, ground, or hardened. New shear blades and grinding work We also supply new shear blades for hydraulic sheet metal shears. The...