zinc galvanizing Germany

...Reduced zinc consumption Improved galvanizing quality Shorter immersion times No disposal of the flux solution Reduced zinc residues in the flux...

...Galvanizing, passivation, and more...

... immediately after electrolytic galvanizing. This results in a colourless, uniform, highly lubricious layer with a dry film thickness of 0.50 - 3.00 µm, which can of course also be supplied in any desired colour. ZPL offers the following advantages: Further improvement of corrosion protection Excellent sliding properties, preventing zinc abrasion in the tool Reduced tool wear Longer tool life Oil-free processing is made possible Coating and printable layer with "Anti Finger Print" properties...

...Galvanizing combines high corrosion protection with a variety of aesthetics. RELIABLE PROTECTION: GALVANIZED COATING IN A SHINY FINISH. Galvanizing combines high corrosion protection with a variety of aesthetics. Galvanic zinc plating with additional passivation and sealing enhances surface durability and has been successfully used in many technical fields for decades. Our production also...

...A maximum level of corrosion protection and decorative effect is achieved cost-effectively through zinc coatings. A post-treatment through chromating further enhances durability, with options available in transparent, blue, yellow, black, and olive layers. As Cr(VI)-free alternatives, we offer the transparent, blue, and thick-layer passivation.

... trapezoidal meshes • Bending and welding of loops • Stainless steel pickling and passivation, stainless steel electropolishing • Hot-dip galvanizing Galfan wire: according to EN 10244-2 Stainless steel wire: 1.4301, 1.4404, 1.4571 Bare wire: according to EN 10016 or EN 10025...

...Bolts with threaded pins according to drawing or e.g. DIN 1445 / 1438 made from all common stainless steels (1.4305; 1.4301; 1.4401) and free-cutting steels with or without all common surface coatings such as galvanizing or zinc flake coatings.

...In galvanic zinc plating, the workpieces are immersed in a zinc electrolyte. The workpiece to be galvanized is hung as the cathode in the solution. A highly pure zinc electrode is used as the anode. In galvanic zinc plating, the zinc deposition is proportional to the strength and duration of the current flow, resulting in a layer thickness distribution across the entire workpiece, depending on the geometry of the workpiece.

...Galvanized coating available as drum and rack goods up to 3m in length Passivations (Cr6-free) available in blue, transparent, yellow, and black One process, two advantages: Thanks to Reinmuth Galvanik's expertise in zinc coating, your components are protected from corrosion and aesthetically pleasing.

...With galvanic zinc plating, we achieve effective corrosion protection. Galvanic zinc plating is used in various applications. We can process the parts as drum and rack goods in fully automated systems. Maximum rack size 3000 x 1300 x 400...

...All types of axles, rods, tubes, shafts, plates, as well as all geometrically complex shaped items and assemblies. A fully automated rack system coats components up to the dimensions of 2000 x 1000 x 300 mm, alkaline zinc, blue and yellow passivated (Chromium 6-free). A fully automated rack system manufactures rack parts up to the dimensions of 2000 x 1000 x 300 mm, acid zinc, blue, yellow, and thick-layer passivated, sealed. (Chromium 6-free)...

...Corrosion protection. Dip process in hot-dip galvanizing: degreasing bath, rinsing bath, pickling bath, flux bath, drying oven, zinc bath, water bath. Hot-dip galvanizing is a reliable protection for steel found everywhere. In vehicle and machine construction or in the field of street equipment, this process is used for its corrosion-preventing properties. In architecture or metal design, it is...

... important property, since the risk of damage is lower. The process is related to the conventional alkaline zinc method, but has excellent durability even without post-treatment. This process is suitable for both barrel and rack goods." ...

... and steel receive a coating that protects them from corrosion. This does not create a pure layer of zinc, but rather various alloys of iron and zinc. Only the surface has a pure zinc alloy. In the case of electro-galvanizing, a coating of pure zinc results in a smooth surface without any structures. The galvanizing processes are suitable for both small and large parts and ensure protection against corrosion, transport, and assembly.

...Galvanizing on a contract basis / We galvanize iron, steel, castings, as well as zinc die castings as frame or drum goods.

...Zinc has a variety of special properties: Galvanized coatings sustainably protect iron and steel from rust. They provide an effective and efficient protection against corrosion.

...Paint for cold galvanizing, quick-drying and suitable for all small repairs. Restores the appearance of new shiny metal. PACKAGING UNIT: Box with 12 spray cans VOLUME: 500 ml PRODUCT TYPE: Zinc paint...

... serial zinc flake coating without additional oven drying. Achieves 720 - 1440 hours of salt spray resistance (C 4, C 5 I/M) according to DIN EN ISO 9227 and 12944. Complies with standard No. LN1461 for repairing hot-dip galvanized sheets. The zinc spray is also suitable as a primer for cold galvanizing due to its properties. It is free from lead, chrome, and cadmium. Weldable, laserable, and can be coated with almost all paints.

...Galvanizing is a cost-effective and efficient method for functional and decorative corrosion protection. The very high quality of the coating ensures good bending and edge strength. The following passivations are optionally available – in accordance with the End-of-Life Vehicles Directive (Directive 2000/53/EC) and the WEEE Directive (Directive 2002/95/EC): - Thin-layer passivation (IMDS No.: 900924) - Colorless passivation - Thick-layer passivation (IMDS No.: 900896) With the different passivations, an improvement in corrosion resistance is possible.

...To improve productivity and workplace safety, Unitechnik Automatisierungs GmbH has developed a method for the automatic skimming of slag at galvanizing plants. In this method, slag is continuously skimmed from the surface of the zinc bath and temporarily stored in a special container. Depending on the fill level, the container is emptied and the slag is recycled. For this purpose, Unitechnik has...

...Galvanizing, Anodizing, Zinc Coating, Painting, Powder Coating Our range of surface treatment and finishing includes the entire spectrum such as galvanizing, anodizing, zinc coating, painting, powder coating, as well as polishing or grinding. We also offer our surface processing services for third-party workpieces.

...We stock over 25,000 items in our extensive standard parts warehouse, covering more than 2,500 square meters. The range of materials includes automatic steel, high-strength materials with strengths from 8.8 to 12.9, stainless steels, brass, and plastics. Surface treatments such as galvanic zinc plating, hot-dip galvanizing, nickel plating, zinc coating with thick-layer passivation, and zinc...

... stainless steel • Surface treatments / anodizing, hard coating, painting, powder coating, galvanizing (zinc, tin, and decorative surfaces) • Engraving • Assembly of components • Cable assembly • Order picking and packaging We see ourselves as "problem solvers," coordinating all necessary steps that may involve multiple specialized service providers, ultimately bringing everything back together. You define your product requirements - we take care of the rest. Trust us - we know what needs to be done.

...Galvanizing, Zinc-Iron Alloy, Zinc-Nickel Alloy, Copper Plating, Nickel Plating, Chrome Plating, Tin Plating, Measurements, Iron Phosphating, Zinc Phosphating, Manganese Phosphating Electropolishing of Stainless Steel, various passivations, various sealants and emulsions...

Aalberts surface treatment: Corrosion and wear protection through highly functional surface designs. Comprehensive product portfolio, 60 years of experience, proprietary process technology, operating worldwide.

... all our materials can be found in our comprehensive material table. Stamped and Bent Parts Designs • According to customer drawing or sample Stamped and Bent Parts Surface Treatments • Gold plating, silver plating, nickel plating, tin plating, galvanizing, chrome plating, Delta Tone, Delta Seal, zinc lamella coating, phosphating, Molykote coating, Glisscoat, dyeing, painting, powder coating, shot blasting, glass bead blasting...

...For subsequent corrosion protection or to influence physical, electrical, or chemical properties, we offer a wide range of surface treatments. Galvanizing, zinc coating, phosphating, chromating, anodizing, chemical nickel plating, or painting, we have the right partner at hand. Powder coating is even carried out in our affiliated sister company.

... thick layer black passivation; various sealings) • Copper • Nickel • Tin (matte and shiny) • Silver • Hard silver • Tampon galvanizing • Hydrogen embrittlement relief (tempering) • Mass finishing • Salt spray test Quality Management for Multi-Spindle Turned Parts For the production of multi-spindle turned parts, we maintain a very high quality standard, which is linked to our certifications...

... thicknesses from 1.30 to 8.00 mm and material widths from 5.00 to 40.00 mm allow for applications in a wide range of industries. We manufacture our rectangular nuts from materials such as steel, stainless steel, or brass, depending on the need, in flat or alternatively in profiled designs, either raw or with various surface finishes. For this, we use common galvanic coatings, thermal galvanizing (TZN), as well as zinc flake coatings.

...Surface protection plays a crucial role in metal processing and usage. In addition to corrosion protection against external influences, the external appearance of the product is also enhanced. Here, BCK employs various technologies to achieve the desired result: galvanizing with zinc or zinc alloys, powder coatings, KTL priming, protective films, or painting of the respective component or workpiece.