tin bronze Germany

...Alloy: CuSn4 (CW450K) / CuSn6 (CW452K) / CuSn8 (CW453K) Standard: EN 1652 / EN 1654 Condition: HV / Rm according to customer requirements Delivery form: Foil, sheets, strips, wire, cut pieces Surfaces: Mill finish, electroplated (full surface or selective, nickel-plated, tin-plated, etc.)...

...The essential characteristics of this PVD coating are a coefficient of friction of 0,4 and a max. coating hardness of 2.600 HV. The low thermal conductivity effects a very good thermal insulation that increases the possible cutting speed. TiN coating is a all-round coating that has a big rang of applications. However it shouldn’t be used for cutting brass, bronze, copper or austenitic stainless steel.

...Sliding elements made of solid tin bronze (CuSn8) with lubrication reservoirs that serve as lubricant storage. The lubrication reservoirs allow for larger quantities of lubricant to be stored, resulting in longer maintenance intervals. These sliding bearings are only suitable for grease lubrication. Type of lubrication: Grease lubrication Temperature range: -40 to +150 °C Max. sliding speed: 2.5...

...Massive sliding bearings made of tin bronze with diamond-shaped lubrication pockets, suitable for oil or grease lubrication, low maintenance, ready for installation Bunded bush and cylinder bush AMBz®09 made of tin bronze CuSn8/CuSn8P | DIN ISO 3547 ADVANTAGES: ♦ cost-effective alternative to turned sliding bearings ♦ low maintenance ♦ ready for installation ♦ RoHS compliant ♦ REACH compliant...

... technical details, please visit the product page on our website! Support material/Carrier material:Steel tin-plated Intermediate layer:Sintered bronze Sliding layer:PTFE Static load:≤ 250 N/mm² Dynamic load:≤ 140 N/mm² Sliding speed:≤ 2,5 m/s Friction value:0,02 up to 0,18 µ Temperature strain:– 200 up to + 280 °C Max. PV-value:1,8 N/mm² x m/s Housing Ø:H7 Bushing inner ø after mounting:H9 Shaft tolerance:f7...

... round bars, flat bars, pipes Cast Tin Bronze and Red Brass: CuSN7ZnPb, CuSN12Ni in round bars, hexagonal bars, square bars, flat bars, pipes Cast Aluminum Bronze according to DIN 1714: CuAl10Ni3Fe2, CuAl10Fe5Ni5, CuAl11Fe6Ni6 in round bars, square bars, hexagonal bars, flat bars, pipes, sheets Low-Alloy Copper Wrought Alloys: CuBe2, CuCo2Be, CuCo1Ni1Be, CuCrZr, CuNi2Si, CuTeP in round bars, square bars, hexagonal bars, flat bars, sheets Gray Cast Iron and Ductile Iron: GGC 25 and GGGC 40/50 in round bars, square bars...

... specially alloyed steel. We produce complex forms and assembly parts with a strip thickness of 0.15 to 3.00 mm and with a strip width of up to 120 mm; the strip thickness will be dependent on the material. Strip materials: Carbon steels, Stainless steels, Cold-rolled strips, Slit strips. Non-ferrous strips: Brass, Copper,Bronze,Special alloys such as K55 or K75. Strip coatings: Tin-plated, Galvanised, Silver-plated, Gold-plated, Painted, Partial coatings, Special coatings on request.

...Zinc-containing bronze alloys, such as red brass, are made from the metals copper and zinc, and may also contain tin, lead, and nickel. The color spectrum ranges from gold-red (high copper content) to a light yellow (high zinc content). The common alloys have a maximum zinc content of 45 percent and are considered particularly resistant to cavitation and wear. Their excellent emergency running and sliding properties also make red brass frequently used in hydraulic systems – for example, in sliding bearings, shells, bushings, or gears.

...Main products: High-precision tin phosphor bronze strips, copper strips, brass strips and white zinc copper strips Product characteristics: Good yield strength and fatigue strength, good elastic properties, excellent processing and bending properties, good ductility, durability and corrosion resistance Applications: Electrical and electronic devices, communication technology, electrical network, hardware, construction industry, home appliances Production capacity: 104,000 tons Honorary titles: Zhejiang Famous Brand Product, China's Top 5 Copper Strip Company ...

... the surface. These surfaces complement the existing production and storage program of the Designfactory. The areas of application are very versatile: elevator construction, facade and metal construction, shop fitting, decorative interior design, lighting industry, etc. Colors: • gold • brass • champagne • bronze • copper • mocha • blue • anthracite • black • (additional colors available upon customer request) Base / Variants: • mirror/high-gloss polished • glass bead/ceramic/diamond blasted • perforated sheets (including inner holes) • ground (K 80-1200) (grinding pattern longitudinal and...

...Material: Bronze-Copper alloy; Solder material: Tin; Our services: Soft soldering...

... Wire cooper without lines, containing impurity, contain Copper quantity for 96% (minimum content 94%). Shall not contain excessive lead and tin change of copper wire, welding of copper, brass and bronze line, excessive oil, prohibition and nonmetal,crisp, burning line, utterly margin of fine copper and excessive sexual yarn. Need appropriate means to remove dirt. Birch Shall consist of clean, untinned, uncoated, unalloyed copper wire and cable, not smaller than No. 16 B & S wire gauge, free of burnt wire which is brittle...

...We coat wooden profile strips, extruded aluminum profiles, and plastic profiles with copper, bronze, tin bronze, steel, corten steel, brass, silver, gold, and stainless steel.

... Internally manufactured colorings: Old colorings (copper/brass/tin old) White bronze black coloring Other surfaces available upon request Copper: Intermediate layer for chemical/physical reasons, decorative application Nickel: Corrosion/wear/diffusion protection Black nickel: Corrosion resistant, galvanically deposited black tone (appearance) Tin: matt (solderability) - glossy (appearance)...

...EDEN-TiN coatings are decorative titanium nitride coatings on stainless steel surfaces. Various color options are available, such as: • TiN-Gold • TiN-Rose Gold • TiN-Bronze • TiN-Brass • TiN-Black • TiN-Red • TiN-Blue...

...Medals for Sports, Events, and Honors large and small quantities, any shape and any color For all occasions, small and large delivery quantities available, Gold, Silver, Brass, Bronze, Copper, Tin, Glass, shiny or patinated, with loop or in a gift box, also enamelled with epoxy resin, customized to your specifications. We are also happy to develop your designs.

...Recycling and Trading of Non-Ferrous Metals such as copper, brass, red brass, bronze, aluminum and its alloys, magnesium, lead, zinc, and tin. As the value of these metals is subject to significant fluctuations on the stock market, we continuously monitor the current prices and take this into account in both purchasing and selling. Through proper processing, they can be reused almost indefinitely as secondary raw materials.

... goods are possible. We can offer you the following surface coatings: • Zinc blue chromating (Cr-VI-free) • Thick layer passivation (Cr-VI-free) • Yellow chromating, sealing) • Zinc-nickel (transparent thick layer black passivation; various sealings) • Copper • Nickel • Tin (matte and shiny) • Silver • Hard silver • Tampon galvanizing • Hydrogen embrittlement relief (tempering) • Vibratory...

...Our stamping department manufactures stamped strips and parts for a wide range of technical applications. We focus on optimal material usage and select the best manufacturing process and suitable machine for your project. We process all common materials such as: aluminum, bronze, brass, copper, stainless steel, spring steel, cold rolled strip, hot rolled strip... Subsequent surface finishing (e.g., zinc, tin, gold, silver, etc.) or finishing of stamped strips with subsequent separation completes our stamping portfolio. We also offer post-processing services, such as welding pins, in-house.

...Filigree stamped and bent parts of the highest quality is our specialty. Constant quality control of the stamped parts is one of our most important principles. From steel: • rust-resistant spring band steel (1.4310, 1.4404, 1.4301, etc.) • cold strips (ST01/02, etc.) • hot strips • untempered spring band steel • hardened spring band steel (C60 / C67 / C75 / C100) From non-ferrous metals: • beryllium • copper • brass • tin bronze • nickel silver • titanium • nickel • tombak • zinc • and more - please inquire From aluminum: • raw • anodized...

...The most well-known copper alloys are brass (copper-zinc), bronze (copper-tin), copper-nickel, and nickel silver (copper-nickel-zinc). Copper and copper alloys form a central foundation of modern life. They provide us with electricity and clean water, and they make a significant contribution to sustainable development. For centuries, copper has been intertwined with the history of human progress. Its important functions are evident in our homes, in transportation, in industry – essentially throughout the entire infrastructure.

... press capacity from 250 kN to 2800 kN. With the assistance of our actual manufacturing site we nearly handle every kind of requested material. For instance: Copper Cu Bronze CuSn Brass CuZn Steel DD, DC Coated strip material Chrome-nickel-steel X10CrNi / 1.4310 with a stability from 600 to 2.200 N/mm² Stainless steel X5CrNi / 1.4301 Aluminium AL The material can be already galvanised, tin-plated, silver-plated or gold-plated. Just tell us what you need. We come along with the solution.

... to order fire-refined tin-plated strips made of copper, tombak, brass, and bronze. We also have no issues with refined surfaces made of gold, tin, silver, nickel, and copper, regardless of whether you want selectively, unilaterally, or fully refined strips. We work with widths ranging from 0.1 to 530mm and thicknesses from 0.06 to 4.0mm on our two production facilities.

... coatings from a single source, including: Hard Anodizing, Zinc Plating, Tin Plating, Cadmium Plating, Copper Plating, Nickel Plating, Electroless Nickel Plating, Electroplating on Aluminium, Silver Plating, White Bronze Plating, Phosphating, Tin Nickel Plating, Brushplating.

...aluminum, stainless steel, iron, gold, silver, tin. Special equipment/finish: patina, individual texture, brushed, stained, polished, ground in one stroke, raw waxed, high-gloss, silk matte, matte. RGO Concrete: We coat all paintable substrates with a thin (from approx. 1.5 mm) layer of concrete or slate. Different surface structures from fine to coarse are always possible. This is not a...

... had previously been entrusted with the management of the company as operations manager. We galvanize products for a long-standing customer base from the fields of electrical, electromechanical, and precision engineering industries, as well as automotive and medical technology. We specialize in bulk and rack goods and refine Turning- Milling- Stamping- and Laser parts in gold, silver, white bronze, nickel, tin, and copper.

On modern slitting lines, we cut strips from brass, copper, tin bronze, and aluminum. Processing of painted materials is also possible. Upon request, we can cut your material free of grease or with narrowed band saw and width tolerances well below DIN standards. Best quality and reliability. Certified according to ISO 9001. Our extensive Wieland stock, a high-quality machine park, and an...

...valve construction, control and regulation technology, and the music industry. We deliver the parts according to your requirements, for example as bulk goods, individually packaged, as stamping strips, with various surface treatments such as KTL-coated, with pad printing, partially or fully gold-plated, silver-plated, tin-plated, ground, tumbled, electropolished, brushed, degreased, or assembled...

... variety of tailored additives, we weld for example: Almost ALL stainless steels / chrome-nickel steels (1.4301, 1.4303, 1.4404, 1.4460, 1.4462, 1.4571, etc.), many tool steels (1.2311, 1.2319, 1.2343, 1.2767, etc.), nickel-based alloys (Inconel718, Inconel625, 2.4619, 3.4602, etc.), aluminum alloys (AlMg1, AlMg5, AlMg4.5Mn, AlMgSi0.5, AlMgSi1, etc.), copper alloys (Copper-tin/Bronze, Copper-beryllium, Copper-nickel, Copper-silver, etc.) as well as Stellite (Stellite 6, Stellite 12, Stellite 21, etc.).

... radiation protection and durable constructions. - Tin products: High-purity tin for electronics and the food industry. - Aluminum products: Lightweight and robust, perfect for construction and mechanical engineering. - Nickel products: Corrosion-resistant and durable for demanding applications. - Secondary metals: Recycled metals for environmentally friendly and cost-effective production. Our customers appreciate us for our reliability and the high quality of our products. We maintain close partnerships with leading suppliers worldwide to always guarantee you the best conditions and timely delivery.