steel sheets Germany

...Rillennails (also known as anchor nails or comb nails) are used where nails are subjected to pulling and shearing forces. They are driven in like any other nail, using a hammer or nail gun, but due to their grooved thread, they achieve significantly higher withdrawal values in wood compared to smooth nails. Their application is found in the fastening of steel sheets and steel sheet components (wood connectors) with wood in load-bearing structures. It is recommended to primarily use them in softwoods that are not prone to splitting. For hardwoods, we recommend the use of screw nails.

...Hot rolled steel products are rolled from casting slab and produced as a coil. We are supplying materials with thicknesses between 1-25mm and width up to 2000mm as a coil, slitted or cut to length sheets. Our stock includes hot rolled sheet materials produced according to EN 10025-2, EN 10028-2, EN 10149-2, SAE J403, ASTM A283, EN 10083-2, ASTM A1011, EN 10111, EN 10025-4, DIN 1614- 1 and others.

SpanSet secutex Sicherheitstechnik GmbH was founded in 1982 by Heinz Franke and SpanSet GmbH. Initially, the focus was primarily on developing protective coatings for textile lifting devices and lashing materials. This was also the birth of secutex, secutex as a pseudonym for "Safe Textile". Over the years, secutex has developed into one of the largest processors of compact polyurethane and is now...

...Applications: - Power transformers - Distribution transformers - Large generators Available sizes: - Thickness: Typically ranging from 0.18 mm to 0.35 mm, depending on specific application requirements. - Width: Generally available in widths from 500 mm to 1000 mm, with custom widths also available for specific designs and requirements. - Length: Can be supplied in various lengths depending on manufacturing and installation requirements, often as coils or in cut-to-length sheets.

...Components made of stainless steel 1.4571, water jet cut according to customer specifications...

... • Structural sheets • Tread plates • Perforated sheets Versions 1C: hot-rolled, heat-treated, non-pickled 1D: hot-rolled, heat-treated, pickled 2B: cold-rolled, heat-treated, pickled, cold-rolled again 2C: cold-rolled, heat-treated, non-pickled 2E: cold-rolled, heat-treated, mechanically descaled 2R: cold-rolled, bright annealed As additional services, we offer foil wrapping of sheets as well as delivery with or without paper interleaving. Furthermore, the sheets can also undergo surface treatment.

Whether for stainless steel processing, storage, further processing, or the production of stainless steel products: Linster is your partner! As a proven, modern material, stainless steel semi-finished products are indispensable in the manufacturing of technical products and systems in the food industry. The selected range of stainless steel products includes: seamless, welded stainless steel pipes...

Metall Meister Grimma GmbH is an innovative metal processing company in the heart of Saxony. The medium-sized business operates at 2 locations in Grimma (Saxony). Our core business includes the areas: Blech-Lohnfertigung Schaltschrankbau Bertriebseinrichtungen Baustromverteiler Pulverbeschichtung Schäumen From CNC sheet metal processing to welding and the assembly of complex compo...

...Stainless steel sheets in all common dimensions and materials...

...The StencilLaser SL 600 HS MicroCut is a system for cutting thin stainless steel sheets. The main applications are SMD solder paste stencils. However, other MicroCut applications such as fine filters made of stainless steel, gobos for light advertising, thin sheet machine parts, stencils for cappuccino finishing,... can also be produced with this system.

... 1500 mm width is the most common requirements and supply. Expanded Steel Sheets that are from the expansion of hot steel rolls, generally are preferred for places where the weight of the patterned sheets have to be minimized. By their lightweight characteristics, generally are used in ship building industry, walking lines, door or complete generator boxes, partition walls, ceiling coverings, pipe and cable cover system, truck haulages, fences, platforms and military structures.

...We process thin sheets, thick sheets, wear-resistant sheets, aluminum sheets, stainless steel sheets, copper sheets, brass sheets, and much more, with sheet sizes ranging from 3000 mm to 8000 mm, and thicknesses from 1 mm to 180 mm. Steel sheet constructions and aluminum constructions, as well as industrial profiles (including contour processing).

The company ShenZhen PromoStar Hardware Co.,Ltd specializes in CNC metal processing, turning, milling, stamping, and welding products for all industrial sectors. We use materials such as stainless steel, aluminum, titanium, brass, or carbon steel. We meet every industrial need, e.g.: electrical appliances, electronics, vehicle parts, LED lighting, furniture, machinery & equipment, cleaning technol...

...Cold and hot rolled stainless steel sheets | Custom cuts available via water jet, plasma, or saw on our own equipment | Sheets available up to a maximum thickness of 150 mm (depending on material) Special materials: 1.4547 | 254 SMO 1.4550 | AISI 347 1.4539 | AISI 904L 1.4435 | AISI 316L 1.4835 | 253 MA 1.4003 | UNS S 41003 1.4903 | SA387 Cl. 2 Gr. 91 1.4313 | UNS S 41500 1.4948 | AISI 304H 1.4006 | AISI 410 [...] Standard materials: 1.4301 | AISI 304 1.4571 | AISI 316Ti 1.4404 | AISI 316L 1.4541 | AISI 321 1.4462 | AISI 318LN 1.4828 | AISI 309 1.4841 | AISI 310 [...]...

...Aluminum and stainless steel sheets tailored to your needs. We provide you with the best quality sheets and coils in your desired dimensions. Thanks to our state-of-the-art service center in Möhlin, we can guarantee outstanding standards for surfaces, flatness, and just-in-time delivery. See for yourself!

...cold- and hot-rolled, heat-resistant stainless steel sheets, ferritic Surfaces 2 E, 1 C in standard sizes 1000 x 2000, 1250 x 2500, 1500 x 3000 up to max. 2000 x 6000 mm also available as cut-to-size according to drawings Coil cuts and slit strip heat-resistant steel: stainless steel sheet furnace construction: mechanical engineering...

...The maximum processable piece weight is 4 tons. Materials: • Stainless Steel Sheets in the materials: 1.4016 / 1.4301 / 1.4401 / 1.4404 / 1.4529 / 1.4539 1.4541 / 1.4571 / 1.4841 • Aluminum / Titanium / Brass Dimensions: • Longitudinal grinding up to max. 2000 x 8,000mm • Cross grinding up to max. 3000 x 8,000mm • Thicknesses: 0.5 - 50 mm Versions: • Longitudinal grinding / Cross grinding / Cross-hatch grinding / Duplex grinding / Hairline / Diagonal Grain sizes: • Ground grain 36 - 3000 • Brushed non-woven band grain 100 - 500 Special grinding: • Grinding of hot-rolled sheets up to 50 x...

...Niro Präzisionstechnik specializes in the manual mechanical processing and processing of thin stainless steel sheets up to 4 mm. Our specialty are funnels, composite shapes, reductions and transitions, for example from round to square. We only process non-rusting materials such as V2A and V4A stainless steel, titanium alloys and aluminum. Our production conditions allow the manufacture of...

...The Power Former KF 170 PD - the forming machine for stretching, compressing, reshaping, flanging, smoothing, clamping, arching (bombing), straightening, punching, notching, and clinching. The KF 170 PD is a pneumatic machine equipped with single and continuous stroke capabilities, capable of forming steel sheets up to 2 mm. When operated in single stroke mode, the KF 170 PD is ideal for...

... galvanized finishes - Hot-rolled strip sheets with trimmed edges in all common formats up to 6 x 2 m (S235 and S355) and thick plates up to 120 mm - Stainless steel sheets (also in polished), aluminum sheets (also as duet sheets), and perforated sheets in various designs.

TRANSFER Steel Service GmbH specializes in the stock trading of flat steel products. The company was founded in 1989 in Langen near Frankfurt (Main) and has been based in Constance on Lake Constance since 2008. Our main sales markets are in Europe, North Africa, the Middle East, and Southeast Asia. Together with our subsidiaries and investments across Europe, we handle around 120,000 tons per year...

Are you looking for high-quality trapezoidal and corrugated sheets for your construction project? Whether it's a private project or a construction company – we offer both corrugated sheets and trapezoidal sheets for various applications. Use the sheets, for example, as an alternative to roof tiles. They are more cost-effective while being robust and durable. Trapezoidal and corrugated sheets can ...

...Plate spreading magnets are used for separating stacked iron and steel sheets. The spreading magnets are mounted on the side of the stack of sheets, they magnetize the sheets with the same poles, which makes them repel each other. Plate spreading magnets are used both in automated equipment, where plates are handled by vacuum or magnetically, and in manual workplaces, where their help makes gripping of plates much easier.

...ELKALUB MBF 370 is a medium for temporary and long-term corrosion protection. It prevents stainless steel sheets from tarnishing under seawater influence. Due to its extreme high-pressure properties, it is very well suited for lubrication. By adding it to industrial gear oils, corrosion protection and load capacity are improved. ELKALUB MBF 370 can be removed using the H1-approved cleaner ELKALUB FLC 900 or by steam cleaning. ELKALUB MBF 370 can be applied using a brush, by dipping, or as a spray. ELKALUB MBF 370 is available as a spray (400ml), pump spray (300ml), or in bulk.

...Filter Housings Since 1972, JL Goslar has been producing steel sheets that are extensively and uniformly lead-coated using machinery. This has enabled the economical manufacturing of uniformly lead-coated filter housings with both square and round cross-sections in the highest quality. Filter systems manufactured in Goslar are in use worldwide in metallurgical and chemical plants. Due to their...

...hexagonal workbench with worktop in beech multiplex 40mm, 6x drawer cabinets R 18-24 each with 5 x drawers 2x 100, 2x 150, 1x 200 mm, drawers with full extension 100%, load capacity 100 kg 6x steel sheets without energy ramp WxDxH 2500x2165x859 mm sturdy steel construction:30 12 x 100 mm, 12 x 150 mm, 16 x 200 mm:full extension 100% load capacity 100 kg:604.488...

...Stamp mouldings for embossed or recessed stamping of aluminium or stainless steel sheets for the car industry. We produce the stamp mouldings in accordance with your data in soft or hard condition. Thanks to the high-quality structures, the movement between top and bottom dies is precisely coordinated. The design is based on your drawings or data.

... stainless steel sheets up to a width of 2000 mm - Cone bending Profile bending Flat steel up to 100 x 10 mm Angle steel up to 60 x 60 x 6 mm U-profile up to UNP 80 Welding Robot welding in the gas shielded arc welding process up to a part size of 1800 x 900 x 600 mm Manual welding by certified welders in all common welding processes...

...Stainless steel sheets for the food industry. Stamped, bent, folded, welded, pickled.

...Steel Sheets | Galvanized Aluminum Sheets | Steel Sheets for Indoor and Outdoor Use | Aluminum Balcony Cladding | Galvanized Sheets...