stainless steel hydraulic cylinders Germany

... the use of stainless steel make it possible to use the pressure transmitter under tough operating conditions. Measuring range:0 … ± 500 mbar / 0 ... ± 10 bar Kind of measurement:Differential pressure measurements in both directions Line pressure:Max. 100 bar Signal output:4…20 mA / 0…20 mA / 0…5 V Range of operating temperature:-25 ... +85 °C Max. overload for one side:Three times measuring range Burst pressure/ -protection:300 % over capacity Dead volume:Both sides 0.35 cm³...

...Joint head with internal or external thread. Housing made of forged C45 alloy steel, spheroidal cast iron GS400, or stainless steel 1.4401 / 1.4404 or 1.4301. Maintenance-required steel/steel bearing. Joint bearing can be re-lubricated, fixed with double-end swaging or retaining rings. Suitable for standard hydraulic cylinders, 160 bar according to ISO 6020/2. Designed for minimal connection distances with maximum stroke utilization or for double-acting hydraulic cylinders. For welding onto piston rod ends or hydraulic cylinder bases.

... (check valves, lowering brake valves) - Built-in directional valves (mechanical, electrical, proportional) - Cylinders made of stainless steel or aluminum - Cylinders painted according to customer specifications - Cylinders galvanized -...

... poles: 3 Number of switching outputs: 1 Housing material: Stainless steel 1.4305 Number of wires: 3 Electrical connection version: M8 cable connector Switching output version: PNP Switching function execution: NO contact Cable sheath material: PUR (polyurethane) Protection class (IP): IP67 Sensor surface (active): Central area Cylinder version: with C-slot (round slot) Position of the sensor surface: Surrounding area of the equipment Access for mounting, cylinder slot: lateral Version of the round slot: for round slot 3.75mm Switching frequency: 1000Hz Cable length: 0.3m Ambient temperature: -25 ... 70°C...

... includes a hydraulic unit HA 510. Required tool inserts are not included in the device's delivery. These must be selected according to the respective task. Contact us for a customized offer including. Technology: Flanging Drive: Hydraulic Design: Manual Flanging Pliers Industries: Container Construction, Apparatus Construction, Tank, Silo, Tanker Material: Steel, Stainless Steel...

... 4.5 m/s. Other speeds on request. Operating temperature range:0 °C to 66 °C Mounting:In any position Positive stop:Integrated Adjustment:Hard impact at the start of stroke, adjust the ring towards 9 or PLUS. Hard impact at the end of str Material:Steel corrosion-resistant coating; Piston rod: hardened stainless steel Damping medium:Oil, temperature stable Application field:Linear slides, Pneumatic cylinders, Swivel units, Handling modules, Machines and plants, Finishing a...

... moreover available in inch dimensions and – as special version – with a stainless steel sleeve in the spherical ball. Thereby an essentially higher tightening torque is possible than with the plastic spherical ball. Please ask us for other sizes. igubal® rod end bearings - Applications igubal® rod end bearings - Applications Temperatures Dimensional series K in A+B variants for temperatures upt to +200°C (HAT material).

...Application Miniaturized 3/2-way cartridge valve in the 8 mm Spider series. This is used as a pneumatic pilot valve or for direct control for precise dosing of gases or liquids. Benefits This very compact valve is suitable for direct mounting in a valve block. All pneumatic or hydraulic connections can be integrated into the valve block. Nominal diameter::0.5 – 1 mm Pressure range::2...8 bar Power consumption::0.55 W Medium::Compressed air Valve body::Stainless steel...

... pressure fluids - Piping with cutting ring or welded cone fittings - Drive powers up to 110 kW per motor-pump unit - Noise protection enclosures for motor-pump units and complete aggregates and - Pneumatic controls - Compact pneumatic circuit systems - Controls for compressed air emergency drives for e.g. rotary kilns, converters, etc. - Installation in stainless steel control cabinet systems for use in aggressive environments We provide systems "from a single source," including motors and cylinders as well as electronic control with wiring, including...

...Hydraulic loading shovel with 2 cylinders, connection 3/8", hoses NW10 and nut M18x1.5 House color RAL 5015 Sky Blue (other RAL colors, galvanized or made of stainless steel available at an additional cost) By tilting the bucket upwards, bulk materials can be transported without loss. Also suitable as a snow plow. Type: EKS1000 Capacity: 1000 liters Price: Price on request Own weight: 330.0 kg Load capacity (max.): 2,000 kg Width: 2,000 mm Height: 700 mm Depth: 1,800.0 mm...

...air, oil, and aggressive chemicals, in normally open and normally closed variants. - Motorized Ball Valves: Made of brass and stainless steel, ideal for irrigation, mechanical engineering, and the food industry, with precise control options. - Ball Valves: One-piece, two-piece, and three-piece variants for efficient flow control, robust and reliable. - Pressure Regulators: Pressure reducing...

... individual machine. Do not hesitate to describe your problem to us and contact us. Together, we will find a way to solve your hydraulic drive problem as well. Development, design, and manufacturing of hydraulic cylinders, stainless steel hydraulic cylinders, piston rods, cylinder tubes, and guide heads for all industries. Industries (excerpt): Industry (general and specialized mechanical...

...stainless steel, and aluminum, as well as cylinders with position measurement systems, are produced to the highest technical standards. With our computer-controlled machinery, we manufacture all cylinder sizes, from micro cylinders with a diameter of 10mm to large cylinders of 800mm. A high level of manufacturing depth and a well-stocked material warehouse guarantee you the shortest delivery...

......) • Hydraulically operated high-pressure grease pumps • Hydraulic pumps • Hydraulic units and systems • Hand pumps in steel and stainless steel • Project planning Hydraulic accumulators, pressure accumulators, hydro valves, commercial vehicle hydraulics, proportional valves, heat exchangers, pressure switches. Short stroke cylinders, clamping hydraulics, hydraulic lifts, hollow piston...

... cylinders, and much more. Experienced employees ensure compliance with your quality and deadline requirements. Of course, we are also certified according to ISO 9001:2008, Workpieces We drill cylindrical or square workpieces in solid material or pipe weighing up to 50 tons from: - Steel - Stainless steel - Aluminum - Titanium We drill individual parts, small and large series. Our technical...

For more than 20 years, nearly 800 of our customers have been convinced of the quality and precision of our hydraulic units, hydraulic cylinders, stainless steel cylinders, and hydraulic valves, among others. Enthusiastic technicians with a high standard for quality and perfection are continuously working at AGIROSSI on the further development and innovation of hydraulic and pneumatic components such as hydraulic cylinders, micro cylinders, stainless steel cylinders, and hydraulic units. And their success proves them right.

... (main business area) • Development and production of special components/solutions (main business area) • Special components (e.g., turned parts, stamped parts, cast parts, and fully assembled units) according to customer specifications and technical drawings • Coupling technology • Control technology (control valves) • Fastening technology (clamps) • Ball valves in steel or stainless steel • Lifting cylinders • Measurement technology • Throttle valves • Check valves • Control plates • Hydraulic motors and pumps...

...-Heinz Burre quickly recognized that the future lay in hydraulic controls and devices, and he oriented the company accordingly. He took on this challenge and often ventured into technical uncharted territory. He was significantly involved in the automation of machines for the textile industry. But he was also successfully active in other technical areas; for example, he developed an automatic hatch cover control for ocean-going vessels. In line with this development, the production area has steadily grown and now exceeds 5000 m².

AK REGELTECHNIK GMBH develops and produces all kinds of oil hydraulic components and power plants. The company also plans and organizes services for oil hydraulic equipment. AK REGELTECHNIK GMBH manufactures turned parts and casings, using stainless steel, machining steel, cementation steel, brass, aluminum, gray cast iron, and plastics. AK REGELTECHNIK GMBH produces according to the latest state...

...etc. Fittings / Pipes / Hoses: Fittings, connection parts, and valves for hose integration in steel, galvanized steel, brass, nickel-plated brass, and stainless steel with all types of screw threads, including non-standard ones. Hydraulic hoses, plastic hoses, and pipes in various materials and dimensions, especially TECALAN products. Handling technology: In the field of handling technology, we improve and streamline manual workstations and assembly workstations. The necessary devices and systems for this are created by us.

...sensors,\nlight barriers, reflection switches, light switches, laser switches,\nPLC controls, touch control devices, message runners,\ntemperature controllers, position switches, microswitches,\ninductive proximity switches, capacitive proximity switches,\nactuating elements, indicator lights\n\nTool Temperature Control\ntemperature control couplings, stainless steel couplings, adapters,\nblind...