shaft seal Germany

...without shaft seal Robust and casted casing CARTRIDGE UNIT for fast and easy maintenance Temperature up to 120°C (higher temperatures are possible) Close coupled, single stage, back-pullout-design Universal DIN/ANSI connection Suction port DN65 Discharge port DN50 Material:Stainless Steel 1.4401 (AISI 316) Rated speed in [rpm] at 50Hz /60Hz:3000 Suction port:DN 65 Discharge port:DN 50 Voltage in [V]:400/690 V CA triphasé Protection class:IP 55 Max. flow velocity in [m/s]:côté aspiration = 1 / côté refoulement = 3 Max. temperature for in [°C]:190/optional bis 300...

...The RWD design RA is a radial shaft seal in standard execution according to DIN 3760 Type A, featuring an elastomer outer casing and an inserted tension spring. The design is suitable for sealing rotating shafts against pressureless spaces or spaces with low pressure differentials. Standard elastomer materials are NBR or FKM; other materials are available upon request.

...Shaft Seal W602 Pressure (bar): 0.5...

... for driving the dosing pump and dispenser • Sprockets on the drive shaft are connected with chains accordingly • Automatic central lubrication • 10-fold indexed rotary table with mechanical overload clutch • Jam monitoring in all inlets and outlets • Digital vacuum monitoring systems • Filling unit with rotary slide dosing unit • 15 L filling funnel (alternatively: compensator) • Thermal sealing unit (conductive) • Screwing unit with electronically controlled servo motor and lid feed • Integrated conveyor belt • Integrated PLC control Siemens S7 Functionality: fully automatic...

... * Available with electric or pneumatic drive * No lubricants, thus preventing contamination of the conveyed medium by lubricants * Optimized drum emptying * Universally resistant PTFE shaft bearing * Maintenance without special tools * Sealing modules of the seal-less (DL) pump are interchangeable...

...Shaft seal for oscillating movements; the dynamic sealing surface is shifted away from the shaft into the seal. Applications: agitators, pumps, internally cooled transport rollers, bitumen pumps. Shaft seal that can accommodate or tolerate oscillating movements; the dynamic sealing surface is shifted away from the shaft into the seal. Applications: agitators, pumps, cooled transport rollers.

...universal useclamping/release elastomer seal lightweight construction small size PRESSURE MAXIMUM 9,0 bar air vacuum TEMPERATURE MAXIMUM 90 °C air MEDIA:air, vacuum SPEED MAXIMUM:200 1/min SIZE:DN 8 (1/4") M5...

...Applications at high speed and low pressure. With O‑ring as secondary seal for sealing in the groove base. Hygienic design without undercuts. No sump formation in front of the seal. Reduced heat buildup due to special lip design. Pressureactivated seal energization. The integrated wedge prevents the sealing lip turning inside out. Very long seal life due to high abrasion resistance. Material only generates low frictional force. Sealing lip does not stick to the mating surface even after prolonged shutdown...

... in the barrel pump and significantly increases service life. The barrel pump is available in stainless steel, polypropylene, and polyvinylidene fluoride. In the stainless steel version, the F/FP 424 can also be used in explosive areas. Advantages: - No seal wear - Optimal emptying of the inner tube - High service life - Low wear on guide bearing and shaft - Long lifespan of the bearings...

...▪ Continuous, volumetric, viscosity-independent, and pulsation-free dosing ▪ Suitable for low-viscosity and self-leveling materials (e.g., dripping resins) ▪ Wear-resistant solution by avoiding material contact at the shaft seal ▪ Uninterrupted production through a material reservoir with up to 350 ml usable volume ▪ Pressure and temperature sensor including sensor holder at the pump outlet ▪...

...Designed for large diameters. Hollow shaft, max. Ø 30 mm. Counter with 5 decades and fine reading. Display can be designed for “mm” or “inch”. Magnifying function for good readability. Stainless-steel driving shaft as an option. Axial seal, dustproof and splash-proof.

...iglidur® sealing lip bearing d1 [mm]: Quick and easy-to-mount polymer bushing made of iglidur® J (JDSM) or iglidur® V400 (VDSM) with clip-on radial shaft seal ring as sealing for the rotating shaft. Seals off against dirt, dust as well as all pressure-less media. Polymer bushing with clip-on radial shaft seal ring Sealing for rotating shaft Temperature application range like iglidur® J...

...Seals are an important component in machinery and conveyor technology, used in various equipment such as pumps, motors, compressors, and other machines. They are manufactured in a wide range of profiles and sizes. From simple O-rings to shaft seals and the complex designs of housing seals, we have many seals in stock for you. Our inventory consists of the following seal categories: - Housing seals - V-rings - Shaft seals...

... seal the Uniline. The profile of the linear axis can be used with numerous commercially available fastening components. • Motor mounting with solid or hollow shaft • Strokes of over 3,000 mm • Sizes from 40 x 51.5 mm to 100 x 122.5 mm • Variants with long runner or multiple runners The linear guides of the Compact Rail product family guarantee excellent performance in terms of speed and lifespan...

...Gear Pump with Magnetic Coupling The magnetic coupling serves as both a contactless drive and a sealing solution. Magnetic drive pumps are often used when critical fluids need to be transported. This type of shaft seal ensures that the pumps are 100% safe and operate without leaks. Particularly for hazardous substances that must not enter the atmosphere, the magnetic coupling is the most suitable...

... ... +60 °C (-4 ... +140 °F) Viscosity range:0.3 – 100 (max. 1,000 *)mPas Precision CV:1% (Coefficient of variation CV) Velocity range:100 – 6,000 (min. 1 *)rpm Fluid connection:manifold assembly M2.1 Wetted parts:PEEK™; shaft ZrO2 ceramics; rotors partially stabilized ZrO2; epoxy resin; shaft seal: graphite-rein Motor:DC-motor with graphite brushes, assigned power rating 4.5 W, nominal voltage 24 V, digital magnet en Electrical connection:10-pole connector Dimensions (L x W x H):Ø 18 mm, length 90 mm Weight:approx. 65g Remarks:* depending on accessories, Customized solutions on request.

...Magnetically Coupled Unlike the standard pump, these products feature a frictionless magnetic coupling. Oil leakage from a conventional wear-prone shaft seal is eliminated in these models. Applications —Installation in analyzers —Installation in flywheels —Gas technology Value for the Customer —Saves space and is ideal for system integration —High pumping speeds with small dimensions —Low final...

...The conveyance of highly viscous products is part of our technical expertise. Feed pumps must meet the requirements for a long useful life, low maintenance and wear-free operation. We at IFA Technology live up to this claim by installing the most suitable pump in each of our systems. We use all types of pumps, from centrifugal pumps to gear pumps and piston pumps. Depending on the type of medium and its application requirements, we can design and offer you the suitable shaft seal. This includes among others packing gland seals, mechanical seals or magnetic couplings.

...When handling explosive dusts or gases, our fans are equipped with a spark protection at the impeller inlet. Both the shaft seal and the drive train comply with the requirements of the European ATEX directives.

... surfaces perpendicularity of the seal faces to the rotation axis elastic contact of the sealing surfaces existence of a lubricating film between the two sealing surfaces Usually the sealing capability of the mechanical seal against shaft or housing is obtained with the secondary seals, as O-rings, bellows or boots In conjunction with the International Organization for Standardization (ISO) and their standards (ISO 3069), the German Industrial Standard (DIN) published proposals for standard mechanical seals with DIN EN 12756 (24960).

... PRODUCT VARIANTS - as type FMD with sealing lantern and shaft seal - as type LMK with coupling and bearing lantern - as type FM - FU with built-in frequency converter for stepless speed regulation FEATURES - Three-phase motor in TMR stirrer design and reinforced bearing. - Speed range 800 - 3,000 rpm. - Express delivery possible within 24 hours (applies to stocked stirrer components)...

...All information at a glance: "Lubricant and Plant Oil Pump Viscomat 70 230 V (self-priming)" Flow rate 25 l/min Max pressure 6 bar Vane pump, providing high flow volume at high pressures Pump body made of die-cast aluminum Rotor made of sintered steel with resin vanes Seal for rotating shaft accessible from the pump side Integrated bypass line in the pump body Connection on both sides 1...

... done by means of a single-acting, internal mechanical seal which is lubricated by the mixing product or an additional fluid The agitator shaft is connected to the drive directly with a flange coupling inside the seal housing. By default, this agitator series is supplied with marine type propellers. Other mixing elements according to the mixing task upon request. Solutions correspond to those of the SPR, additionally mechanical seal in sealing housing. Other solutions for this series upon request.

...-50 to +800°C, up to 10 bar Ex-protection: Optional Sealing: Shaft packing, also compliant with TA-Luft / O-ring Sealing: Valve disc with circumferential seal, adapted to the medium Insulation: None / prepared for site-installed external insulation Materials: Steel / Stainless steel Actuation: Electric / Pneumatic / Hydraulic / Manual gearbox / Also with emergency position in case of power failure...

...The stirrer seal or stirrer passage is a key component of a pressure or vacuum reactor. It ensures the tightness at the passage of the rotating stirrer shaft. Contact us!

...The pumps of the Universal Seal Series are internally geared rotary pumps that operate based on the displacement principle. This allows for use with highly viscous media. Due to the extremely wide range of flow rates, pressure, and temperature, this series is suitable for a variety of applications and media. The selection of materials and shaft sealing types ensures application-specific pump...

...Solid and compact aluminum pressure housing with polyester powder coating Optical position indicator for screw removal Two cable entries Shaft and mount made of NAMUR-standard stainless steel Easy adjustment without tools Technical Data: BZA-LS-T2-DB Coating: Chromatic polyester powder coating (Black) Housing: Weatherproof IP67 / NEMA A4 & 4X Cable entries: 2x NPT ½" Temperature: -50 °C ~ 80 °C Terminal blocks: 8 points (0.05 – 2.5 mm²) Position indicator: 0° ~ 90° (90° freely rotatable) Closed: red Open: yellow Switch: 2x mechanical switch 2x proximity sensors Switching cycles: 30,000 Seal: NBR...

...We supply V-Seals and V-Rings in a total of 9 different variants. For shaft diameters ranging from 2.7 mm to over 4,000 mm. Standard materials available include NBR and FPM/FKM. Additional special materials such as EPDM, H-NBR, CR, MVQ, and PTFE, some of which are also available in FDA-compliant mixtures or ADI-free, are also deliverable. Our extensive inventory ensures short delivery times. Custom orders can sometimes be fulfilled on short notice.

...PTFE radial shaft seals for sealing rotating shafts, chemically resistant, suitable for use in conditions of inadequate lubrication or dry running, also for high rotational speeds. Standard: Special designs Special: Double lip opposite, same direction, negative, without housing or with protective lip.

...Robust housing made of aluminum or stainless steel - Shaft and ball bearings with shaft seal - Rotor with shaft, gearbox, and permanent magnets mounted in a pre-chamber - Sensor circuit consisting of ASICs with Hall elements and interface electronics housed in a closed main chamber - Detection of revolutions through absolute multiturn gearbox - For protection class IP 69K, the housing is...