rate controls Germany

... opening, a constant feed rate is achieved on the stroke, which also avoids the stick-slip effect. In the models up to 55 mm stroke, the tried and tested rolling diaphragm, known from ACE shock absorbers, serves as a dynamic seal, as volume compensation of the piston rod and as a reset element. Compression force min.:30 N Compression force max.:3,500 N Return Force min.:15 N Return Force max.:30 N...

...— For the comfortable ordering of steam boilers up to 4,000 t/h of steam — Attractive price-performance ratio for steam boilers with a steam flow rate of up to 4,000 kg/h — Color touchscreen for easy use and clear visualization of operating states — Flexible installation and compact design: installed on the boiler or as a wall-mounted electrical cabinet at the factory — Power electronics for fuel supply, feed water pump, purging, and desalination — Optional: fully automatic desalination and purging controlled based on conductivity...

...High-tech system for maximum process reliability. Automatic nozzle SDA 30: high-tech system for maximum process reliability The SDA 30 is an integrated system consisting of a nozzle and a control module. The nozzle is equipped with a Hall sensor that monitors and controls the position of the nozzle needle. All operational settings/adjustments (oil rate and so forth) are automated via the controller of the proprietary Eckardt control unit. This makes it possible to control up to four nozzles at the same time.

... Automatic Gas Control (AGC) features a digital timer and push-button gas controls that provide automatic or manual flame impingement modes. The Atlas HMV was designed with the user in mind. Worldwide use for qualification of automotive interior materials Stainless steel chamber with removable top Door-mounted burner with flame height adjustment and pilot ignition Stainless steel U-shaped...

...The Flow-Trigger™ is an industrial flow switch designed and calibrated to confirm minimum or maximum flow rate within a pipeline. The Flow-Trigger™ combines a fully calibrated flow orifice and an explosion proof differential pressure switch to reliably monitor gas flow within the most demanding hazardous industrial environments. The Flow-Trigger™ is designed to be suitable for use with most...

... addition, the following equally mobile modules are available: — Air supply unit — Exhaust air unit — Liquid supply station (optional) Laboratory coater system::Two additional nozzles for a maximised spray rate Air units::Comfort Equipment: Control of air supply volume via FC, control of drum pressure via FC Liquid supply station::Mobile unit Explosion protection::Machine line design for use of organic solvents (acetone, isopropanol, ethanol) Controls::Portable panel with WinCC, FDA-CFR-21 part-11 conformity due to Siemens software “Log On”...

... and the system is closed to the environment. Software The control of the FAN ci2 is realized by the FANci WINDOWS®–software that guarantees an easy handling of the analyzer system and a clearly arranged representation of the results of measurements. So the user is informed about the progress of the measurements at any time. All controls needed for the routine procedures of the FAN ci2, as recording...

...and well-thought-out detail solutions for easy operation characterize our products. Payload-optimized aluminum construction Compact dimensions, low profile Pivoting axle made of hot-dip galvanized steel Clear and ergonomic design of the controls Long service life, high profitability & cost-effectiveness Maintenance and repair-friendly Height ADT 17 approx. 3,050 mm ADT 45 approx. 2,760 mm Length ADT 17 approx. 7,750 mm ADT 45 approx. 13,900 mm Discharge flow rate* Up to 3,000 l/min *depending on the motor vehicle...

...The miniature transceiver STD-601 has been designed for industrial remote controls and telemetry applications. The module features a simple serial interface and allows the use of custom protocols. Through dedicated serial commands, transmission power, data rate, and channels can be adjusted. The STD-601 operates in the 434 MHz band and complies with the EU standard EN 300 220. Adjustable frequencies: 400 MHz (429 / 434 / 447 / 458 MHz; 434 MHz) Dimensions: 20 x 32 x 5 mm Low power consumption: 26 mA (TX - 10 mW, 3 V), 19 mA (RX) R&TTE compliant: EN 300 220...

... optimally equipped for all requirements. All production processes are subject to continuous quality controls. Your advantage as a customer Good reasons for collaboration: Your cost advantage: Offset with the compensation levy: As a corporate customer, you can offset 50% of our value creation with your compensation levy payments. Reduced VAT rate: As an end consumer, you only pay 7% VAT on our products.

... pressure generation. TECHNICAL SPECIFICATION Two-consumer control: • Medium max. 1000 mPas • Flow rate max. 50 l/min (per valve) • Pressure range max. 3500 bar • Required air pressure 6 – 8 bar • HD connection M 14×1.5 LH / M 26×1.5 • Flow divider output G 1" IG Multi-consumer control MVS 4 • Medium: 1000 mPas • Flow rate: max. 40 l/min • Pressure range: max. 1500 bar • Flow direction: from "P" to "A" • Electric: Standard 24V DC • Pneumatic: 6 bar • Other control voltages such as 220 V, 12 V, Ex or ATEX available upon request...

... cubic feet Can be custom designed to meet any delivery rate Can be custom designed for any closure size and type Clean-out door for quick changeover Lexan bin cover for clear visibility Lexan conveyor cover to keep dust out High and low level photo sensors Self-contained stainless steel control panel Controls can be integrated with capper controls Best to be combined with a rotary sorter and placed next to the capper Markets Served: Beverages, Food, Pharmaceutical, Automotive Fluids, Personal Care, Home Care, and Custom Applications Unmatched Technical Support / Application Expertise!

...The most advanced and robust ultra-high-pressure system on the market. Electrically switching 6500 bar HyperPressure pressure translator pump with ceramic pistons to minimize component wear. Maximum nozzle size: 0.254 (50 hp) / 0.381 mm (100 hp), flow rate: 2.44 (50 hp) / 5.2 l/m (100 hp), operating pressure: 6000 bar Robust pump design: with intelligent controls, monitoring systems, and...

... condition, switches off the unit Shutdown at idle after the working cycle, prevents tool damage and saves energy Robust plastic housing Controls and coupling are set back behind the front edge of the housing Flow rate: automatic adjustment to 1l/min Size L/B/H: 222 x 168 x 229mm (Handle height 40mm) Weight: ca. 6,9 kg Supplied with Hydraulic power unit 3m Remote control 3m Power charger adjustable shoulder strap instruction manual...

... Component (Y-Pb-Pr), 1x AV-Video, 1x RCA-Audio CI+ Slot (Common Interface Plus) Menu Languages: German, English, French, Spanish, Russian, Arabic, Turkish Dolby support, integrated stereo speakers Color: Black Power Supply: AC220V / DC12V Dimensions (with stand): 55.0 x 36.7 x 14.5 cm Dimensions (without stand): 55.0 x 33 x 7.5 cm VESA Standard 100x100 Energy Efficiency Class: F Ideal for camping! Delivery includes: Original packaging, 2x remote controls, 2x AAA batteries, power supply (external), user manual (DE/EN), stand feet...

Water supply, telemetry, dam management, irrigation technology, water quality, wastewater monitoring, flood warning systems, water levels, level data loggers, sensors for water quality, flow rate sensors, telemetry systems, controls, monitoring networks. Core businesses: consulting and procurement of environmental technologies in water management such as high dams, agricultural irrigation, flood warning systems, and monitoring of water quality.