plastic wire Germany

...On our modern extrusion systems, we coat wires, wire ropes, fiberglass rods, and other types of cables. Our portfolio includes plastics (e.g., PP, PVC, PA) as well as all RAL colors.

...The plastic-coated wire bending part is used in the car seat frame and serves as a connecting element.

... can detect even the smallest objects from 1.6 mm at a distance of 70 mm. Its standardized two-wire interface also ensures reliable data transmission and easy integration into a PLC. Temperature range: 0 °C ... 710 °C Spectral range: 7.9 µm Optical resolution (90% energy): 45:1 Response time (90% signal): 150 ms Weight: 1020 g Power supply: 8-36 V DC...

... hot-dip galvanized plastic-coated The material table provides detailed information on materials for our welded mesh. Delivery forms: Roll goods: 20 mm to 2000 mm width – up to 500 m length (limited by weight) Cut pieces, panels, and fixed dimensions: flat-laying and ready for installation with open or closed edges Wire diameter: d = 0.40 – 2.0 mm Mesh widths: MW = 3.50 mm – 100 mm as square mesh...

...NORPLAST® PVC-CU 384 AS is an antistatic suction and transport hose. It’s heavy, has a smooth interior and a grounding wire. Electrical and surface resistance is approx. 10⁹ Ohm...

... in increased spring forces and reduced torsional stresses in the multi-wire spring compared to a single-wire spring at large spring deflections. The tensile stresses in the wire cross-section significantly weaken the spring-destroying torsional stresses, thereby increasing damping. The key advantages: • Ability to absorb high impact speeds and peak loads • Capability to handle high load frequencies • High damping properties • Optimization of damping and guiding properties and lifespan through plastic coating...

...Abrasion-resistant electrically conductive spiral hose Type 519 Highly abrasion-resistant rubber spiral suction and pressure hose. Made from electrically conductive rubber quality. Also suitable for use as a suction and pressure excavator hose. Temperature range: from -40°C to +70°C (short-term up to +90°C) Inner core: NK/BR compound, black, highly abrasion-resistant Outer cover: Synthetic rubber, black, highly abrasion-resistant, weather-resistant, good ozone resistance Reinforcements: High tear-resistant multi-layer rayon cord reinforcements, steel wire spiral, copper wire...

...Brake ventilation hoses with visible or concealed wire spiral. The inside is coated with neoprene or silicone, depending on the version. Due to the wire spiral, the hoses are very flexible and can be laid very well even with larger hose diameters.

...Plastic cable ducts are suitable as cable pulling ducts, telecommunications distribution boxes, and underground distributors, and they are a durable and highly flexible alternative to concrete ducts.

...Additional varieties are available upon request. Specifications: - Mesh sizes from 10 - 80 mm - Wire thicknesses from 1.2 - 3.4 mm in galvanized and heavily galvanized versions, plastic-coated or plastic-covered up to 4.2 mm. - Braid widths from 0.30 m to 3.00 m possible - Braids can also be produced in stainless steel...

...Universally usable wire-actuated encoder with measuring lengths of max. 12000mm, robust design as well as precise and safe wire guidance; prepared for the attachment of various types of rotary encoders with 58mm standard flange. Robust design. Easy mounting. Measurement lengths up to max. 12000 mm. Incremental or absolute encoder. Housing made of aluminum and plastic. High flexibility thanks to free choice of rotary encoders with 58 mm standard flange. Various wire types.

... - Simple installation with VA or plastic supports SWS consists of a 5 mm supporting rod, flexible yet stable, with open guide rings where the cable can be easily inserted. It allows for guiding cables and flexible tubes up to 16 mm – in straight sections or corners. The supporting rods are secured with screwable plastic mounting washers or with VA supports that can, for example, be welded to the machine body.

...• For securing rebar with binding wire from the roll • Fast, reliable, and cost-effective twisting and cutting of the wire in one operation • Cutting edges additionally induction hardened • Handles coated with plastic • Made of tool steel, forged, oil-hardened Length in millimeters: 250 Weight in grams: 395...

...Available in various material combinations. As roll goods or as pre-packaged bundles. Custom materials and configurations available upon request. Seal wire Plastic / Iron Seal wire Iron / Galvanized Iron Seal wire Plastic / Plastic-coated Iron Wire Seal wire Plastic / Copper...

The Werkzeugbau Kröger GmbH is a continuously expanding company founded in 1998 by Hans-Jürgen Kröger. Our entire product range in new construction includes: - Standard injection molding tools / multi-component injection molding tools - Stack injection molding tools / multi-cavity injection molding tools - Tandem injection molding tools / prototype injection molding tools Design, programming,...

...Plastic welding wires from European production in many different materials, colors, and shapes. Small quantities and custom designs are also no problem. For your individual offer, feel free to contact us.

...Stainless steel wire rope with PA 12 plastic coating...

The company HStronic is the specialist in connection technology, spacer bolts, fastening technology, and electronic components. The product portfolio of HStronic GmbH also includes accessories for mechanical engineering as well as control cabinet construction. Ranging from standard solutions to custom-made products. Our sales team is happy to advise you on-site.

KROG - QUALITY SINCE 1920. For 100 years, we have been offering a versatile and high-quality range of storage and operational equipment. We have specialized in certain areas with high-quality and functional products: LABELING. MARKING. VISUALIZING. In the context of Lean Production, 5S workplace design, and the Kanban method, labeling plays a significant role in production, assembly, and storag...

... MANGANIN®, which are encapsulated in small plastic cylinder housings. Prior to trimming, the resistance bodies are exposed to a meticulous artificial aging procedure. This special process and trimming to approximately half of the nominal tolerance guarantee long-term stability of < 0.02% over the course of years. FEATURES: — TC ≤ 10 ppm/K —Class ± 0.02 % or ± 0.05 % —Production range from...

...Also available as ATEX-suitable, antistatic, electrically conductive GRP (glass-reinforced plastic) gratings, particularly slip-resistant version (R13). With assembly or cutting to size if required. Suitable for roofs, chemical plants, warehouses, airports, water treatment, electricity, port facilities, railways and shipbuilding. Optionally with installation service.

...Use: Connectors for thermocouples and resistance thermometers measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic • Contacts of original thermocouple material pins and spring-loaded inserts for reliable contact • Easy wire connection through sandwich...

... green RAL 6005, fir green RAL 6009, olive green RAL 6014, stone gray RAL 7030. Optionally, a horizontal, continuous steel tube 41.5 mm can be mounted at the top of the mesh using a top rail holder, with corrosion protection similar to the posts. The mesh is then attached to this tube. Mesh: Galvanized wire mesh, plastic-coated in the same color as the posts. The wire mesh is attached to the ks...

...Joining methods for plastic containers, tubs, and piping with certified, tested plastic welders The following plastic welding methods are employed at Rauch OHG: - Hot gas welding: with and without the addition of welding wire - Extrusion welding of sheets for galvanic containers - Heating element welding: where the connecting parts or surfaces are joined together using a heating element at the...

... construction phase. Our production facilities are equipped with the latest machinery, including CNC machining centers, CNC spark erosion machines, and CNC wire erosion machines. We provide detailed advice on selecting the appropriate materials and offer options for cost reduction. If desired, we can assist you during the design phase and accompany you all the way to series delivery and beyond.

...When, some 60 years ago conductive plastic potentiometers were first introduced onto the market, it was apparent that although the winding jumps which were a feature of wire-wound potentiometers had been overcome, absolute smoothness of the output voltage could not be achieved. Following some basic reserach by. h. Wormser 4, 5, 6 , the term "smoothness" was included in the standard issued by the...

...The silver anodised aluminium frame profile highlights your advertising content. Due to its simple construction and appearance, the display can be integrated into any interior and at any location. The combination with corner connectors in the same colour creates a uniform appearance. Wire systems are attached to the base frame, to which the acrylic pockets are attached. The U-pockets allow a quick change of contents by simply pushing them in. The display is delivered pre-assembled and includes a plastic hammer.

...Franke slim bearings of the type LSA convince by their smooth running, extremely compact installation space, simple mounting and favourable price. Slim bearings of type LSA consist of an inner and outer race with hardened and profiled raceways and a plastic cage with retained balls. The rolling elements rest against the raceways at two points each, thus maintaining the 4-point system. The...

...Height safety device with rescue lifting mechanism, aluminum housing, steel cable 15m. Robust height safety devices with webbing or galvanized steel cable, lightweight due to the plastic housing, also available with aluminum housing and swivel suspension. The height safety devices have been tested in edge fall scenarios.

... simplifies your design and manufacturing process. The uniform radial spring force leads to controlled hinge movement and consistent hinge quality over time. This controlled hinge movement is achieved with larger tolerances and lower molding costs compared to using a solid pin or cut wire.