zinc coating Germany

...Bolts without heads according to drawing or DIN 1443 or ISO 2340 made from all common stainless steels (1.4305; 1.4301; 1.4401) and free-cutting steels with or without all common surface coatings such as galvanizing or zinc flake coating.

..."The alkaline zinc-iron alloy coating is very commonly applied to steel and ferrous materials. It has been used successfully for many years in the automotive and electrical industries, in equipment and mechanical engineering and also in sheet metal processing. It is characterised by a higher resistance to environmental influences. In addition to the classic galvanising process, the zinc-iron...

...The OXSILAN® process is an environmentally friendly and multi-metal capable pre-treatment technology. In this thin-film technology, layer thicknesses of only about 100nm are applied. The OXSILAN® technology is compatible with all conventional liquid paint and powder coating systems and is suitable for: - replacing zinc and iron phosphating - treatment before painting - as a bare corrosion protection - for passivation...

... constructions, etc.). Coating of capacitors (film or paper capacitors). Coating of heat exchangers for air conditioning systems. Delivery Program Standard diameters: 1.2 mm – 4.76 mm according to DIN EN 14919:2001. Other dimensions available upon request. Grillo zinc wire is available on spools, in rings, or continuously wound in fiber or metal drums.

...A maximum level of corrosion protection and decorative effect is achieved cost-effectively through zinc coatings. A post-treatment through chromating further enhances durability, with options available in transparent, blue, yellow, black, and olive layers. As Cr(VI)-free alternatives, we offer the transparent, blue, and thick-layer passivation.

...Heavy metal-free, cathodic zinc flake coating in the low-temperature range.

...The KERONA® Professional Zinc Spray with TITANID® technology is a room temperature curing zinc flake coating with preventive cathodic protection for metal surfaces. 400ml spray can 2040 PROFESSIONAL ZINC SPRAY The KERONA® Professional Zinc Spray with TITANID® technology is a room temperature curing zinc flake coating with preventive cathodic protection for metal surfaces. Ideal for subsequent...

...Manufactured using state-of-the-art machines and high-precision tools. Surface treatment and separation using the tumbling process also available: explosion deburring upon request Surface finishing through chromating (all common colors) nickel plating powder coating Years of experience in the assembly of intricate components, e.g., with delicate springs produced directly on the assembly machine. Application of methods such as SPC, quality control charts, etc.

...With galvanic zinc plating, we achieve effective corrosion protection. Galvanic zinc plating is used in various applications. We can process the parts as drum and rack goods in fully automated systems. Maximum rack size 3000 x 1300 x 400...

... powder coating, powder layers are applied to electrically conductive workpieces such as steel, galvanized steel (hot-dip or electro-galvanized), aluminum, brass, or copper. After coating, the powder is sintered on the substrate at temperatures of 160°C-200°C. Various pre-treatment options such as degreasing, iron phosphating, zinc phosphating, or treatment with a dispersion are possible. The pre-treatment serves to clean the metal parts and to improve the interlocking of the coating with the substrate.

... and steel receive a coating that protects them from corrosion. This does not create a pure layer of zinc, but rather various alloys of iron and zinc. Only the surface has a pure zinc alloy. In the case of electro-galvanizing, a coating of pure zinc results in a smooth surface without any structures. The galvanizing processes are suitable for both small and large parts and ensure protection against corrosion, transport, and assembly.

...OR 6000® is a coating system that first zinc phosphates the workpieces and then applies a cathodic dip coating (CDC) -...

... phosphating process is available. All pre-treatment processes achieve the best surface qualities and adhesion properties for subsequent coating or painting, creating the conditions for high corrosion resistance. - Lighting fixtures - Fittings for windows and doors - Construction fittings - Fittings for large vehicles (train, bus) - Electronic components - Household appliances, "white goods" - Medical technology - Aluminum cast parts (die casting, gravity casting, and sand casting) - Zinc die casting - Aluminum profiles - Steel profiles and pipes...

...Small series from 1 to 1,000 pieces, Up to 1,000 different colors (especially custom colors), Custom designs upon request (specifically zinc die-casting coating) Parts up to Length: 3.00 m Width: 0.80 m Weight: 150 kg...

...Zinc Spray Special Surface Protection For sealing a joint. Item number: ZUB-005-50 Weight: 0.5 kg Content: 400 ml...

...Galvanizing on a contract basis / We galvanize iron, steel, castings, as well as zinc die castings as frame or drum goods.

...We manufacture hook screws, also known as screw hooks, round hooks, or angle hooks, as custom items in any batch size, using all common grades and finishes. Our hook screws and screw hooks are characterized by their high quality and precision. We specialize in various hook shapes and dimensions. Materials: S235, S355, C45k, 36Mn6, 42CrMo4, A2, A4, and special materials upon request. Finishes: raw, galvanized, thick-layer passivated, hot-dip galvanized, zinc-nickel coating, and zinc lamellar coating. Sizes: M4 to M36 COUNTRY OF ORIGIN: Germany...

...This is a corrosion protection coating applied using state-of-the-art coating methods such as dip spinning, dip coating, or fully automated wet painting.

...METAFLUX Alu-Zinc Spray 70-42 Metallic coating for all surfaces, repair of galvanization, use as a spot welding agent. Metallic coating for all surfaces, repair of galvanization, use as a spot welding agent. For particularly high-quality coatings in outdoor areas, we recommend METAFLUX 70-43 Glossy Zinc Spray. • metallic surface coating • combined corrosion protection from zinc and aluminum • quick-drying Color: silver-gray...

...With this pen, you can safely check if a passivation layer has been applied to the zinc coating.

...This coating consists of a zinc layer alloyed with 10-15% nickel, providing top-level corrosion protection. This coating consists of a zinc layer alloyed with 10-15% nickel. The layer is then passivated in either colorless or black, and can also be sealed or coated with a lubricant upon request. The corrosion resistance can be increased to two to three times that of unalloyed zinc. We offer this application exclusively as drum goods. This surface is used wherever the highest corrosion protection is required, e.g., in the automotive and offshore industries.

...Fine Zinc Wire For Flame and Arc Spraying Zinc Coating Made from fine zinc (Special-High-Grade (SHG), Zn 99.995% "Z1", DIN EN 1179) Application: for active corrosion protection of metals for example, in cast iron pipes, gas tanks and gas bottles, wind turbines, and all metals outdoors, such as metal fences or bridges as a metal coating for, among others, plastic, film, or paper capacitors for...

... +200°C. NdFeB magnets oxidize in their raw state even at high humidity. For this reason, they are usually provided with a galvanic protective coating of zinc or nickel. They are used where a strong magnetic field is required in a small size. By the way: We also manufacture special shapes according to your specifications!

Our brand name "BÄR" is known worldwide for fastening and connection technology, thanks to "Made in Germany." With technical expertise and a wide range of market-oriented products, we are internationally recognized in industry, trade, and craftsmanship. Thanks to consistent quality, innovations, and customer-specific system solutions in fastening and connection technology, we are now a powerful m...

...Galvanizing is a cost-effective and efficient method for functional and decorative corrosion protection. The very high quality of the coating ensures good bending and edge strength. The following passivations are optionally available – in accordance with the End-of-Life Vehicles Directive (Directive 2000/53/EC) and the WEEE Directive (Directive 2002/95/EC): - Thin-layer passivation (IMDS No.: 900924) - Colorless passivation - Thick-layer passivation (IMDS No.: 900896) With the different passivations, an improvement in corrosion resistance is possible.

...Corrosion protection. Dip process in hot-dip galvanizing: degreasing bath, rinsing bath, pickling bath, flux bath, drying oven, zinc bath, water bath. Hot-dip galvanizing is a reliable protection for steel found everywhere. In vehicle and machine construction or in the field of street equipment, this process is used for its corrosion-preventing properties. In architecture or metal design, it is...

...We coat glasses or metals with a height of up to 18 mm in our coating facility. In our Leybold-Heraeus Z600 coating plant, we can apply metallic layers (e.g., aluminum, titanium, chromium, molybdenum, copper, zinc, zirconium, silver, tantalum, rhenium, gold), nitride or oxide layers (e.g., aluminum oxide (Al2O3), titanium dioxide (TiO2), indium/tin oxide (ITO), silicon dioxide (SiO2), chromium...

...We process and refine the finished products according to your requirements. With decades of experience, we possess extensive, in-depth knowledge in the manufacturing of rollers, drums, drive and deflection drums made from materials such as steel, aluminum, stainless steel, and plastic. Our range of services includes: • Galvanic zinc plating • Hard chrome plating • Hardening • Rubber coating, either glued or hot vulcanized • PU coating • Anodizing in standard or hard anodized versions • Non-stick coating We manufacture individual pieces or produce in series.

...Processing of individual pieces to large series from: aluminum, zinc, brass, steel, stainless steel, magnesium - mechanical processing - CNC milling - assembly - stamping - sandblasting - grinding - polishing - vibratory finishing - ball polishing - chrome plating - nickel plating - gold plating - painting - KTL coating - powder coating - aluminum welding...

...Sheet metal parts and welded assemblies, Galvanized, KTL / Zinc Nickel / Powder ... Coating...