rubber metal parts Germany

...PP Film Double-Sided Adhesive Adhesive: Rubber Thickness: 0.140 mm Adhesive Strength: 30 N/25 mm Temperature Range: -40° C to + 70° C The aggressively adhesive bonding agent is characterized by high shear strength and aging resistance. The double-sided tape is particularly suitable for the self-adhesive equipment of panels, strips, profiles, and signs. Other application areas include bonding of metal, paper, and rigid PVC. The adhesive is only partially resistant to plasticizers. Rolls: 50 m Width: 6 to 1200 mm Available as die-cut parts...

... against corrosion Non-toxic Loosens dirt Loosens rust Chemical-resistant Does not resinify Separates Withstands high pressure High penetrating properties CFC- and silicone-free Fields of application PL 200 is suitable for all common materials, e.g. metal, wood, rubber and almost all synthetics. It’s also suitable for almost all synthetic combinations in gear boxes, bearings, chains, screw connections, switches, channels, locks, etc. PL 200 can be used freely in the food sector. Usage Always shake well before use! Check plastic parts beforehand for compatibility, then just spray on, using...

... embossed part can lead to significant fluctuations in the embossing result. A silicone stamp in a 2-component design can lead to noticeable improvements. This is achieved by using two different Shore hardness levels in one stamp. Silicone Plates We manufacture silicone plates according to your requirements, up to dimensions of 500mm x 500mm. Aluminum is available as a base plate in various thicknesses (e.g., 5mm, 10mm). Technical Metal/Silicone Components Certain technical applications require a coating of metal parts with silicone or rubber (e.g....

...Artemis offers a wide range of rubber molded parts, rubber-metal connections, and rubber-plastic connections. Artemis molded articles are designed in project teams, tailored to our diverse processing options, such as injection, compression, and transfer molding, and produced independently of quantity. We see ourselves as a flexible supplier for the original equipment manufacturing industry and specialized trade, and we are happy to meet your specific requirements.

... - Elastomer gaskets - Cork gaskets - Graphite gaskets - Graphite composite gaskets - PTFE gaskets - Gaskets with inner / outer flanges - Cam profile gaskets - Spiral gaskets - Well ring gaskets - Ring joint gaskets - Rubber-metal gaskets - O-rings Gasket sheets from the following manufacturers: - Frenzelit - Garlock - Hecker - Klinger - Reinz - SGL...

... such as forged blanks, pressed or stamped parts, and castings, we provide trough belt blast systems with rubber or steel link belts, as well as drum blast systems. Additionally, impact-sensitive parts can be blasted using the frame method. We manufacture using blasting media made of steel and stainless steel in shot and grit qualities with varying grain sizes and material hardness.

...BETTER ASSEMBLY AND FUNCTION THROUGH PLASTIC PARTS Consultation and design for suitable process technologies Support in construction Combination of different processes Surface finishing EMC shielding Small and medium series Logistics concepts Advantages: All processes in-house, resulting in short implementation times Manufacturing of large components, as well as components for "heavy duty" applications All composite combinations from a single source (metal, wood, plastic) Simplification of assemblies - function is integrated Over 57 years of experience...

... mechanical, thermal, and optical properties that closely resemble those of injection-molded plastic parts. Such parts are not only suitable for testing but also fill a gap for end products with low production volumes (e.g., housings in medical technology). Coloring and surface finishes can be implemented in almost all variations. Special requirements such as fire protection approvals or UV resistance are possible. By overmolding insert parts, composite parts (e.g., hard-soft combinations or metal composites) can be produced.

... construction with a design department, we can ensure that the paths are laid out in such a way during planning and development that an optimal result is achieved through error-free production. Additional manufacturing techniques • Finishing/marking processes such as: Pad printing or laser marking • Assembly and commissioning of components • Overmolding of metal parts with plastics Materials used: All common thermoplastics such as: ABS, PA, PA6.0, PA6.6, PC, PE, PMMA, POM, PP, PPN, PS, etc. The materials can be colored using masterbatch color pigments.

...It does not matter whether the metal parts are only partially or fully rubberized and weigh only a few grams or up to 50 kilograms – we implement your ideas exactly!

...Bearing supports and buffers for vibration engineering tasks. Available in versions: A, B, C, D, E, ES, DS, K, TA, P, KE, KV, crane stop buffers, machine feet, cone bearings, bracket-flange caps and ring elements, rubber-metal rails and spring washers, hood holders, wheel buffers, and drawing parts.

...Materials: NR, SBR, NBR, CR, EPDM, FKM (Viton), ECO, CSM, CIIR, Silicone Solid IM and CM molded parts (Injection Molding, Compression Molding) - Seals - Cable grommets - Damping elements - Manifolds - Bellows - Form hoses - Covers - Housing linings - Rubber buffers - Cable protection - Covers - Spacers - Rubber grommets - Membranes - Rubber-metal parts - Rubber-plastic parts - Clamp couplings - Vibration dampers - Solid rubber wheels - Steel bands - … various other items...

...In every area of life, we find a variety of products whose basic materials are modern elastomers. Rubber Technology In every area of life, we find a variety of products whose basic materials are modern elastomers. Molded Parts Profiles Sleeves Rubber Sheets Rubber Runners Rubber-Metal Rails Rubber-Metal Buffers Rubber-Metal Rollers Rubber-Metal Feet...

... specifications, such as:  Elastic bearings  Spring elements  Sealing elements  Vibration dampers  Bushings  Buffers  Feet  Rails To determine the spring force, the spring characteristic curve can be measured in our testing laboratory. Connection options:  Rubber-Metal  Rubber-Aluminum  Rubber-Stainless Steel  Rubber-Bronze  Rubber-Brass  Silicone-Metal  Silicone-Stainless Steel...

...Molded parts are used in numerous industries, such as automotive, electrical, valve, fastening, fitting, and fixture industries, as well as in plant and mechanical engineering, renewable energy, and the food industry. Custom molded parts can be produced according to technical drawings or samples in materials such as NBR, HNBR, FKM, EPDM, VMQ, and FVMQ. Deliveries of small series, samples for internal pilot and development projects, as well as the procurement of large series are also possible. Production is carried out in hardness levels ranging from 20 to 100 Shore A.

...Standard quality: Natural rubber, 40 Shore A, 55 Shore A or 70 Shore A - Metal parts: Galvanized steel Rubber-Metal W-Element - Standard quality: Natural rubber, 40 Shore A, 55 Shore A or 70 Shore A - Metal parts: Galvanized steel - Particularly suitable for storing small masses at low natural frequencies - Load on compression and shear possible - Rubber wall thicknesses s = 8 mm or s = 10 mm available...

... developed formulations for custom applications sandwich elements with elastomer interlayers of just 0.30 mm Can be produced up to 1,300 mm in length and 1,100 mm in width Rubber, metal, and plastic composite parts as inserts in a two-stage injection molding process or directly as a rubber-metal composite part...

...Plugs are generally used for sealing, as well as for covering and closing in various applications. Particularly in the automotive industry, plugs are used for sealing cavities, for example. They are also used as metal closures, end caps, and for sealing holes and threaded holes. Furthermore, they are suitable for vibration and transport protection. The application possibilities of this rubber...

... 250kN – 5,000kN) - Shot weight under 1g – 1500g - Processing of all thermoplastic materials (except PVC), especially technical (PC, PBT, POM, PA66, PA46, PA12) and high-performance plastics (PPS, PEI, PEEK) - Handling systems - High degree of automation - Special expertise in overmolding insert parts (e.g., connectors and metal parts) - Production of visible parts (e.g., displays, automotive interiors)...

...Universal adhesive agent for cold bonding or hot vulcanization of metal with rubber or polyurethane, e.g., in wear protection lining, drum and roller covering, industrial vulcanization.

...Enclosures for electronic applications aimed at weight reduction (replacement of metal housings) Covers and enclosures for mechanical engineering custom packaging solutions Manufacturing of hybrid parts – plastic-metal connections...

...Turned parts with and without metal inserts, Bellows, Balls, Seat rings, Seals, Ball guides, Check valve flaps, Screws, Pump impellers, Milled parts, ...

Design and construction of deburring machines, washing systems, control systems, surface treatment machines, peripheral installations, and special machines (for technical and medical articles made of elastomers, plastics, and die-cast zinc) Since 1979, the Plömacher brothers have been providing services for rubber and plastic products ranging from 1.5 to 1200 mm for the European and non-European ...

...Standard and proprietary fluoropolymer or thermoplastic compounds, XYTREX, XC2 and XC2-L series. Metal-PTFE composite material Fluometal® for low-friction bearing applications.

... minimal setup effort. The extremely wear-resistant chrome-nickel steel segment clamping sleeve, with rubber specially developed by HAINBUCH between the segments, makes this possible. Manual drive ms spring The manual drive ms spring, in combination with the MANDO and MAXXOS segment clamping chucks, is the ideal choice for machining centers, measuring machines, and pillar drilling, parallel and angular clamping, or clamping in dividing heads.

...We produce for you in various lengths and diameters. We are happy to discuss and provide extensive advice on custom-shaped parts based on your ideas. Our services: - Kanban - Assembly work - Completion work - Packaging work - Further processing with complete service ALL MADE IN GERMANY...

...Shot weight from 0.5 - 1000 g, in quantities from 1 – 1 million. Standard and high-performance materials (PA, ABS, PC, PBT, TPE, PEEK, PPSU, and others) Prototypes/small series/series production of plastic injection molded parts from all common thermoplastics. PA with/without GF, PP, PE, PC/ABS, ABS, PBT... High-temperature plastics - PEEK, PPA, PPS... Cable overmolding Metal-plastic connections...

...Triggering of vulcanized aluminum and steel parts as well as plastic-coated metal components for the reuse of the metal part using cryogenic technology.

... bonding system is crucial to ensure a lasting connection between the components. They are primarily used to reduce the number of individual parts or assembly processes and to avoid assembly errors. Rubber-Metal Parts Composite system made of metal and elastomer parts. Rubber-Plastic Parts Composite system made of plastic and elastomer parts. Rubber-Rubber Parts Composite system made of elastomer parts, e.g., made from two different elastomer materials.

...BLACK-CAT Rubber Cleaner is the newly developed specialty cleaner for rubber surfaces and metal parts of all kinds. - Cleans effectively and quickly to restore the original sliding friction value. - Recommended for BC-Tiger, BC-Tiger XL, BC-Silvergrip, and BC-ESD anti-slip mats. - Easy application by spraying onto the material to be cleaned, then wiping off with a standard cleaning cloth...