hydraulic motor Germany

...90°, 75°, 60°, 45°, 105°, 120°, 135° - Power supply: 3 N - 400 V/50 Hz/16 A - Protection class: IP 65 - Motor power max.: 1.5 kW For more information, please refer to the data sheet. Data Sheet Loading Bridge P1530i (250 KB)...

...Base with hardened guides Hydraulic device; Motor 4,0 kW, 400 V, 50 Hz Operation panel to switch on/off single or multy head mode Foot pedal controlled C-formed stand, working range – ram to back wall 120 mm Daylight 280 mm, quick tool change Distance punch head to punch head min. 245 mm Punching power 60 / 120 kN, stroke 50 mm – stroke adjustable optionally Carriage with linear guides for manual adjustment in X-direction, with pneumatic clamps and positioning scale...

... sludge), or acids. Made from 100% natural fibers, they are a sustainable solution. We continuously develop our filter material to achieve the best results: highest oil and fluid purity — efficient and cost-effective in every application. Areas of application: •,Mineral oils and synthetic fluids up to ISO VG 460 / 40 °C •,biodegradable oils •,hydraulic oil, HFC and HFD fluids •,lubricating oil, gear oil •,coolant lubricants •,turbine oil, compressor oil •,gas engine oil •,fuels, diesel •,motor oil •,hardening oil •,thermal oil •,transformer oil...

... separately, based on the actual task. We optionally offer hydraulic or servo motor drives as well as multiple embossings/stroke. Technology:Dome embossing Drive:Servo motor-driven, pneumohydraulic, hydraulic Type:Stationary, robot-guided Material:Aluminium, steel...

... compressed air, and the cutting process begins with a hydraulic soft start – for a quicker start of work, the rapid feed can also be utilized. In contrast to conventional... Drive Type: Compressed Air Motor Country of Origin: Germany Machine Weight approx.: 12.1 kg Pipe ID: 19.1 - 47.0 mm Wall Thickness: 1.2 - 3.0 mm...

...Hydraulic press with electric motor for the workshop. Fully hydraulic press - Hydraulic workshop press with a pressure force of 30 to 1000 tons. Technical data: - 400 mm double-acting stroke - movable cylinder - Pressure display with manometer - 2 operating modes: electric operation or manual operation - 2 independent hydraulic pumps - Control unit with motor protection monitoring and safety...

... completely revised. The new drive with a frequency-controlled motor and hydraulic pump uses significantly less hydraulic oil and consumes less energy. The shear, with a working length of 3,000 mm, can cut steel sheets up to 6 mm thick. Usable length: 3000 mm Sheet thickness: 6.00 mm...

...Remote-controlled diesel hydraulic grapples operate similarly to electric hydraulic grapples. However, instead of an electric motor, they are powered by a diesel engine that drives the hydraulic pump. Therefore, diesel hydraulic grapples do not require an electrical supply or any other external power source. This is the major advantage of ORTS diesel hydraulic grapples! They work quickly and efficiently, have a lower weight compared to rope grapples, and do not need an external power supply. They can be used with any crane.

...Motor-driven hose reel for grease. Also available in stainless steel. Painted hose reel with compressed air, hydraulic, or electric motor. Various roller windows available to protect the hose. Locking mechanisms are available for all series for use in areas where vibrations are present. Application area: Industry, mining, lubricant trucks, and transport Type of fluid: Grease Motor: Hydraulic, compressed air, electric Capacity: 3/8" 200m, 1/2" 150m, 5/8" 110m, 3/4" 75m, 1" 50m...

... dimensions of the feed conveyor (LxWxH): 1150 x 680 x 380 mm Chain (STIHL): C3621 000 0077/0.375/1.5mm Motor / Drive: Electric motor 400V / 3 Motor power: 9.5 kW, 18.4 A Hydraulic motor chainsaw: max. 4,500 rpm Hydraulic motor conveyor: max. 284 rpm at 110bar, 285 Nm Chainsaw: hydraulic Bar: 55 cm Max splitting length: 50 cm Max splitting diameter: 10 to 50 cm Working speed: 6 cm / sec. Return speed: 5 cm / sec. Splitting force: 20 t...

...-optimized clamping. We deliver technological solutions with longevity and all-round service. The workpieces are aligned, fixed and clamped hydraulically, pneumatically or mechanically. If several parts are processed at the same time, depending on the number of motor spindles, high-precision fixing, positioning and clamping of the parts is necessary. This is only possible with automated tensioning (e.g. hydraulic) and precise alignment of the devices.

...This planetary gearbox with integer ratio is prepared for the attachment of a hydraulic motor. It is suitable for a variety of applications in mobile technology. Motor connection compatible with: Danfoss OMP / OMR, as well as the subsequent models OMP X / OMR X. Ratio: i=5 Output torque: 1100 Nm Output shaft: Ø60mm...

... spindle vertical travel Y:mm 1500 (1900) Table traverse travel Z:mm 2100 Swing diameter:mm 2200 A-axis:degree -100/+60 B-axis:degree endless X/Y/Z:m/min 45 A-axis:rpm 6(12) B-axis:rpm 5.5 (10) Motor spindle , max. Speed:rpm 30000 Max. power (100% ED):kW 120 Total taper:HSK-A63 / (HSK-A 63/80) Positioning uncertainty (P):sec 0,005 / 6 Positioning scatter (Ps):sec 0,0028 / 4 Reversal error (U):sec 0,002 / 3 Weight:t 58 Space requirement for basic machine LxWxH:mm 11400 x 8300 x 5450...

The production focuses on hydraulic gear pumps, motors, and flow dividers. Both aluminum and gray cast iron housings are available with various shaft and flange combinations.

...The hydraulic adjustment system Movotec consists of cylinders and a pump, which is driven by a hand crank or an electric motor. The resulting drive pushes the oil from the pump into the cylinders and back from the cylinders to the pump. This allows the cylinders to extend and retract within the designated adjustment range (stroke). The Movotec product range includes the following systems: As a retrofit system for heavy-duty workstations, as a height adjustment system with ready-to-install corner legs, or as a complete table adjustment system to create an ergonomic workplace.

...The hydraulic adjustment system Movotec consists of cylinders and a pump, which is driven by a hand crank or an electric motor. The resulting drive pushes the oil from the pump into the cylinders and back from the cylinders to the pump. This allows the cylinders to extend and retract within the designated adjustment range (stroke). The Movotec product range includes the following systems: - As a retrofit system for heavy-duty workstations, - As a height adjustment system with ready-to-install corner legs, - Or as a complete table adjustment system to create an ergonomic workplace.

...Aggregates as well as motor-pump combinations with standard motors or brushless DC motors. From a quantity of 1.

...Brake dynamometers with air cooling and/or water cooling, hydraulic and low inertia brake dynamometers, with water or air cooling, brake dynamometers with hydraulic brakes, 4-Q regenerative dynamometers. All test benches are used for engine loading, for measuring power, and for measuring and recording other measurement quantities in the engine as well as the engine emissions. The 4-Q regenerative dynamometers can also drive and, consequently, can also test other rotating machines, in addition to engines. The areas of application are research, development, quality assurance, and vocational training.

INOX stands by you as a reliable partner with high innovative strength and chemical expertise, focusing on Made in Germany. Since the registration of our company, we have grown into a leading B2B manufacturer in the areas of Private-Label for additives, lubricants, coolant antifreeze, and specialty chemicals for cleaning processes in the automotive industry as well as in industrial applications.

...Hydraulic Bottle Jack (HEAVY DUTY) 50T Lifting Height, mm: 250 Load Capacity, kg: 50,000 Packaging Dimensions, mm: 230x190x270 Extension Stroke, mm: 170 Dimensions, mm: 180x150x250 Weight (KG): 19.00 Additional specifications available upon request.

...Special units 1000 to 50000 liter tank volumes, standard aggregates, motor / pump assemblies, valve stands, storage stations, filter cooling circuits, lubrication systems, engineering and delivery compl. tube sets...

Air-oil and water-oil heat exchangers for hydraulic systems, installed in both industrial tools and mobile machines; special tube bundle heat exchangers for the oil and gas market. Air-oil heat exchangers with aluminum radiation packages and AC fans for stationary machines or DC fans for mobile machines, air exchangers with hydraulic motors and autonomous cooling units, non-inspectable water-oil ...

...Delivery is without hydraulic oil, and standard hydraulic oil used is TL 46. All Härtel press products are manufactured according to CE standards and come with up to 24 months warranty from HPW 60 K. We can also manufacture these presses according to customer specifications.

... and a quick and material ecient plant restart. Features Drive/reject mat unit including track support Reject mat hopper Integration in the belt drive station Motor-adjustable table including belt deection nose Motor-adjustable belt cleaning brush Advantages Distance-controlled activation for an optimised material discharge and minimised rejects volume Options Including disintegrating rollers Including dust ap Hydraulic reject mat drive Nose stroke 3000 mm or 4000 mm...

... oils for petrol and diesel engines. It is also suitable for catalytic converters and turbochargers. After adding it to the motor oil, the engine only has to be warmed up. Re-fill after each oil change. The benefits at a glance ERC hydraulic tappet additive: Attenuates noise created by dirty and gummed-up hydraulic tappets Cleans valve bores Improves the lubricating properties of the oil ERC hydraulic tappet additive can be added to the motor oil at any time. One bottle is sufficient for 4 litres of motor oil.

...High-pressure side channel blowers up to 1000 mbar Single-stage, two-stage, and three-stage side channel blowers SKV-tec GmbH: Highest quality at affordable prices SKV-tec GmbH provides you with side channel blowers of the highest quality at competitive prices. From 40 m³/h to 2,050 m³/h and from 0.2 to 25 kW motor power. As spare parts or as a series supplier for OEMs. All sizes are generally available from stock!

...HENNLICH offers a comprehensive standard range of air coolers. Versions: - Air Cooler HCA (AC Motor) - Air Cooler HCD (DC Motor 12/24V) - Air Cooler HCH (Hydro Motor) - Air Cooler HCP (AC Motor + Pump) - Air Cooler HCC (for Diesel Engines)...

...Hydraulic motor MPM 082, this motor is typically delivered without a flange. Of course, this can be obtained from us.

...Control cabinet for a hydraulic press with safety PLC including circuit diagram and software Rittal control cabinet (size according to requirements) Main switch (position freely selectable) 400V motor control for hydraulic pump Siemens PLC Siemens operator panel 7" Safety evaluation for emergency stop Safety evaluation for light barrier (protection and cycle operation) Safety evaluation from two...

...Hydraulic Submersible Water Pumps with grill Hydraulic Submersible Water Pumps with Open Suction Hydraulic Mounted Submersible Water Pumps Brochure Submersible Water Pumps 7 MOTIVES TO CHOOSE HYDRAULIC PUMPS FOR THE POWER PERFORMANCES The hydraulic pumps have an unbeatable power / weight/ dimension ratio, example an hydraulic motor with power of 15 k W have a weight of only 4 k g and the...