open sections Germany

... What Can Open Side Door Containers Do For You? An open side container also known as side door container is a variant a of standardarized container that can be opened along its longitudinal sides. They have multi-wing openings on the side wall, allowing variable openings of the desired sections. Thanks to the side openings, loading and unloading is particularly comfortable with respect to sea containers, which only have double doors at the front. Due to the large opening, it is also possible to move rather bulky objects that do not fit through the doors of standard units. So, an open side...

... advantages: - Open and visible cable laying - Safe construction, very stable and corrosion-resistant - Easy manufacturing and assembly with just two tools and two connection accessories - Easy to clean, good ventilation The grid channel is available in sections ranging from 53 mm x 46 mm to 620 mm x 110 mm and heights of 60 mm and 100 mm, in the form of mini channels starting from 40 mm x 20 mm in U, W, C, and G shapes, as well as flat grids. Material: Stainless steel...

...Cut pieces from tubular film rolls, 2-ply, especially for open-top and open-bottom packaging as product protection Width: from 40 to 3000 mm Thickness: from 0.03 to 0.25 mm...

...Special thread brakes allow the delivery of the connection rails with an open clamping space. Current carrying capacity: 63A Rated voltage: 400 V AC Connection cross-sections: 7x 16 mm², 12x 16 mm², 15x 16 mm² Available colors: blue, green, black...

...Production standards are summarized as below for Cold Formed Sections; Water and gas pipes: EN 10217-1 TR1, EN 10255, DIN 2440, BS 1187, ISO 65, N FA49-145, ASTM A53, ASTM A500, DIN 2999-2986, BS 1387, ASTM A53 Industrial Pipes: DIN 2458-1615 & 1626, BS 6363, BS 6323, BS 1139, EN 39, EN 10219-2 Open Sections: EN 10162 Square and Rectangular HS: EN 10219-2, DIN 2395, DIN 59411, BS 6363, N FA49-541, ASTM A500, UNE 36-537, SI 1458 For Hot Formed Sections as per EN 10210/ASTM A501.

... monitor the mobile supply, ensuring the highest degree of safety and efficiency. We can supply you with natural gas in the quality you require, e.g. For uninterrupted gas supply to your customers during maintenance work on your network For testing purposes in industrial companies considering switching to natural gas (e.g. in the steel, glass, porcelain and ceramics sectors) For testing purposes in plant sections where natural gas is not yet available For the initial fill and for purging of pipelines...

...Our steel pipe masts are composed of individual sections and can reach heights of up to 50 meters. They are practically waterproof and well-ventilated. Thanks to individually sized mast bases and diameters, various application possibilities are available. Common installation options include mounting in open fields, on concrete elements, or on existing buildings. A wide range of accessories...

...Concrete columns serve to bear loads in large open spaces, both in industrial construction and residential building. • max. element length 15m • max. weight 20 tons • single and multi-story columns • all rectangular cross-sections possible • round possible Further dimensions available upon request.

... without guying or in open fields with guying. The test conditions in the climate laboratory were extreme and extensive, and have been confirmed in global operations. Operating and maintenance manuals are available. The supply of spare parts with NATO-coded components is guaranteed for an unlimited time. The standard PU mast program is complemented by smaller PU masts that have fewer telescopic sections.

...We manufacture everything from pedestrian and cycle path bridges (naturally in various designs) to composite girders (open sections as well as hollow boxes) and complete superstructures for road bridges. Whatever you want to realize in steel, we are the right partner for you. From the beginning of the quotation process to the completion of the project, one of our experienced project managers...

... specific sections and the entire documentation – entirely according to your requirements. We support you in the creation of: • Replacement part catalogs • User manuals • Phantom drawings • Perspective representations • Exploded views • Section and escape point drawings • Illustrations • Digital visualizations up to photorealistic 3D animations... An open ear for your concerns and wishes throughout the entire creation phase is a given for us – and of course, communication.

... and UV radiation. They are also in demand in high-speed data transmission as LVDS cables (Low Voltage Differential Signaling). CAC Fabrimex assembles sheathed cables of all cross-sections and designs. From stripping, insulation removal, and cutting to the contacting of connectors, for example, for display control or any other application areas, our skilled personnel are at your disposal.

... unprotected, open-pored absorption materials, it is inevitable that the finest grease particles penetrate the absorption material. Design: Curtain type C Effective according to the foil resonance principle Housing made of galvanized steel sheet with a lightweight profile frame. The curtain consists of two different sections. AKUSCLEAN® silencers are RAL certified. The curtains have the type designation C100 and are available exclusively in a curtain thickness of 100 mm.

...Sectional doors open vertically upwards, creating space around the door system. The individual door sections are stored flat under the ceiling, positioned vertically above the opening or following the roof slope. "Sectional doors leave no design wishes unfulfilled" Industrial sectional doors made of steel, steel/aluminum combinations, or aluminum meet almost every architectural requirement...

...control cables, or communication cables; both above and below ground, as well as in open or challenging terrains. We install customer-supplied cables of all kinds (e.g., low and medium voltage cables 1kV-110kV, high voltage cables, fiber optic cables, sheath and control cables of all cross-sections, as well as communication and fire alarm cables, etc.) in various installation methods (stage, route, riser, trench, pipe, etc.). It does not matter whether the installation is to be carried out inside a building or outdoors.

... manufacturing of rotationally symmetrical parts for mechanical engineering, plant construction, gearbox manufacturing, and the production of hydraulic components. We manufacture these from forged and cast blanks or saw sections. The open and personal customer contact allows us to quickly recognize needs and changing market requirements and respond appropriately. Do you need items that do not match...

... models - Teamwork in groups - Training and tailored personnel development programs for the further development of individual potential - Employee discussions, assessments, and promotion of the well-known high standard of social benefits in the metal sector. SCHIECK-WLT is interested in people who want to achieve something through: - Creativity and excellent qualifications - Enthusiasm and a desire for performance - Highly flexible teamwork and open communication - A constant desire for improvement. As a future-oriented company, the creation and securing of jobs is a major concern for us.

... machines, individual hall and fire sections, and hall supports, or system solutions in hall construction, such as the large, WHG-compliant sliding roof hall in a complete steel construction from the ground to the roof. Planning and construction, steel manufacturing and sheet metal processing, general steel and container construction – from design to the finished painted product – round out our offerings. We plan and produce both small and large series as well as custom parts.

... entire company by Jörg Lehmann & Martin Tenner, new construction of another production hall, totaling 4,800 m² of covered production & storage space and 10,000 m² of open space. 2013: Development of the new noise protection system made from roll-formed profiles 2014: Product launch of the quality-tested noise protection walls ALIUS, TYTO, and OTUS 2014: Only provider of tested distance profiles STRYX...

Precision, reliability, and quick availability are the high standards for cold profiles from Wickeder Profile Walzwerk. The company stands for market-oriented solutions in the profile sector, backed by years of experience and innovative know-how. The product range includes reinforcement profiles for plastic windows, open and closed special profiles made from hot-rolled and cold-rolled steel...

...2000 The establishment of a quality management system is completed, and certification by TÜV confirms what has been known to our customers from the very beginning: quality and customer satisfaction are the top priorities at Präzisa. 2004 Cold runner technology in the area of LSR production is now also available with an open system. Up to 16 cavities can be directly injected.

The company SOMASS Marietta and Christian Sohler operates in the field of cold-rolled profile construction. We design roll drawings, assembly plans, cutting lists, roll forming tools, and frame profiles for our clients. Our customers primarily include machine builders, manufacturers of cold-rolled open and closed profiles, and manufacturers of pipes in all dimensions and material types. We utilize Finite Element Analysis (FEA) technology to validate our designs, ensuring the quality of our constructions. Our operation is certified according to DIN EN ISO 9001:2008.

Send us your inquiries for special profiles, open or welded, and blank steel.