multi-oil Germany

...TIPP OIL Mineral Super 15W-40 is a mineral multi-grade engine oil for passenger car gasoline and diesel engines, both turbocharged and non-turbocharged, as well as for commercial vehicle engines. It allows for extended oil change intervals according to manufacturer specifications. TIPP OIL Mineral Super 15W-40 is characterized by good cold start properties, minimizing fuel consumption, friction...

...The technology of multi-stage ACP rotary piston pumps meets the requirements of applications where clean and oil-free vacuum is essential. The contactless pump module operates without internal lubricants. It generates an oil-free vacuum without backflow of hydrocarbon vapors. There is no sealing material between the rotor and stator, preventing the formation of particles.

... healthy working environment for you and your employees. Heat and odours are effectively filtered and the emulsion separated from the exhaust air can be reused. The filters of the oil mist separators are equipped with multi-stage filtration. The elements are cleanable and reusable. Harmful emissions, dust and aerosols are removed from the air at almost 100%. Health hazards Oil mist and emulsion mist Motor:0.4kW capacity:19 m³ /min (1,140 m³/h) Noise level:66 db (A) Air inlet:Ø 150 mm...

... Good lubricating properties thanks to high oil percentage Displaces moisture Also available as spray version OKS 601 Operating temperature:-30 °C ➝ +60 °C/150 °C Density (20 °C):0.81 g/ml Base oil viscosity (40 °C):approx. 3 mm²/s Salt spray test:> 50 h Coefficient of friction SRV:µ = 0.09...

... ergonomically shaped SoftGripp multi-component covers • SoftGripp handles with SystemSocket for accommodating optional accessories, such as the easily attachable SystemClip for fall protection • The ergonomic design of the pliers allows for fatigue-free working while protecting the tendons and joints of the user • Made of tool steel, forged, oil-hardened Length in millimeters: 200 Weight in grams: 290...

...The casing of the FITOK Push-On multipurpose hoses made of synthetic fiber (MP series) is weatherproof, abrasion-resistant, and oil-resistant. The synthetic fabric reinforcement ensures maximum strength and tear resistance of the end fittings. These hoses can withstand a working pressure of up to 20.7 Bar (300 PSI) and are available in blue, black, green, gray, red, and yellow.

...Compressed air preparation helps to avoid malfunctions in pneumatic components and increases their lifespan. Machine failures and downtime are reduced. Whether it's compressed air preparation, pressure regulation, or air cleaning, you will find everything from multi-part maintenance units to pressure regulators, filter regulators, lubricators, condensate drains, and oil-water separators, as well as system expansions and various accessories.

... include a combustion system, there are no exhaust gases that could necessitate a permitting process for combustion. As it operates without fossil fuels, there is no need for fuel storage, as well as reduced supply and handling efforts. Additionally, further infrastructure such as chimneys and fuel tanks is eliminated. Our electric heaters allow for multi-stage or alternatively stepless power regulation.

...Global energy consumption is constantly rising. The raw material required for vehicle operation, energy production and other products is predominantly based on crude oil and natural gas. Screw pumps are often used in the production of these valuable commodities. For decades, Leistritz has been an expert partner for the oil and gas industry, whether for pumping tasks in crude oil production using multi-phase pumps, transfer and injection pumps or in the transportation of crude oil using booster or pipeline start-up pumps. Leistritz pumps are also used in refinery processes.

... in all types of transmissions. Coolant Protection Fluids: Coolant antifreeze ensures long-lasting cooling performance in all cooling systems and protects against corrosion in the cooling circuit. Multi-Purpose Oils (UTTO): Base oils and state-of-the-art additives ensure excellent wear protection and high stability under shear loads, as well as good responsiveness of the hydraulic system even at low ambient temperatures. Greases: We also offer synthetic high-performance greases as well as soap-free and metal soap greases of various NLGI classes.

...This grinder, with its multi-disc motor, has a unique and patented oil-free drive. As with turbo drives, the machine needs no lubrication and is nevertheless slim and handy. It has the same durability of lubricated multi-disc motors. A double row of bearings means that this grinder is even suited to extreme applications. Operation:pneumatic Other characteristics:straight,rear exhaust...

...High-performance gear oil in Aral synthesis technology with smooth-running properties. Multi-range character SAE 75W-90 for passenger car manual transmissions, two-wheel transmissions and transaxles as well as for commercial vehicle units (e.g. trucks, construction machinery, agricultural units) Specifications API GL-4+ VW 501 50 Container size:1 Product number:1544675...

...The operation of our oil and emulsion mist separators is based on the separation through wire mesh cassettes. The mostly multi-stage filters are designed according to the application with various packing densities, wire diameters, etc. The clean gas values required by environmental authorities are always exceeded by us. Extraction systems for industry | Dust extraction systems | Dust removal systems | Stationary dust filter systems for industry | Oil mist separators | Air conditioning systems (air technology systems)...

...WD-40 Multi-Purpose Spray | 400 ml Spray Can Multi-functional product in a 400 ml spray can. Features: - eliminates squeaks - displaces moisture - cleans and protects - loosens rusted parts - frees stuck mechanisms - silicone-free Delivery included EAN:5032227490048 ml:400...

... connected, the distance between the socket plate and plug plate is designed to be 30mm for all sizes. This means any size of Cupla can be mounted and used on the same plate. Airless structure valves prevent outflow of fluid and admixture of air into the fluid line. Autocatalytic NickelPhosphorus coating is adopted for surface treatment over special steel body and internal parts. This coating is environmentfriendly. Applicable Fluids:Hydraulic Oil Working Pressure:50 bar Valve Structure:Two-way shut-off (Non-Spill) Body Material:Steel Seal Material:FKM Size:1/4" / 3/8" / 1/2" / 3/4"...

...The CSB steam boiler enables future-proof low emissions in accordance with the MCPD Directive (EU) 2015/2193. — Large performance range from 300 to 23,600 kg/h for pressures from 0.5 to 16 bar available — High efficiency thanks to integrated economizer and helical heat exchanger tubes — Flexibly usable with various fuels and as multi-fuel combustion (oil, natural gas, biogas, up to 20% hydrogen...

... application: Manufacturing, chemicals, oil and gas, pulp and paper industry, mining, transportation, utilities, hospitals, authorities, etc. Resolution: 300 dpi. Connections: USB, Ethernet, optional Wifi, Bluetooth. Approximately 1,500 labels/day depending on label size. Max. print length: 2530mm. Max. print width: 101mm.

...Combines the advantages of tooth and ribbed belts Cross-toothing for form closure on one side and longitudinal ribs for power transmission on the other side Suitable for multi-shaft transmission with counter-rotating drive discs Specially treated fiberglass tension member for high tensile strength and adhesion Antistatic, oil- and heat-resistant Quiet power transmission Temperature range: -35°C to +130°C Temperature range: -35°C to +130°C...

... aging and ozone resistance - conditional oil resistance Applications: - pressure and chemical industry - food industry - pharmaceuticals Delivery forms: - Ø 8 to 152 mm - Color: blue - Rolls of 4 m up to Ø 76, > Ø 76 - 4 / 2 / 1 m per roll On request: - short lengths - customized with couplings - other diameters...

...To create ideal conditions in terms of rigidity and damping for multi-axis machining, the series was equipped with hydrostatic (oil) bearings. By using diamond tools, optical surface quality can be achieved on a wide range of materials like crystals, nonferrous metals and plastics, even with complex geometries. Similar to the MMC 600/900 air bearing machines, the basic setup can be equipped with...

...-stage filter combination • various air performance options available • the filtered air can be returned to the room, eliminating the need for exhaust duct installation • ideal for quickly equipping existing workstations • dimensions 950 x 670 x 1450 mm (L x W x H) Application areas o labeling lasers, engraving lasers o welding lasers, cutting lasers o solder smoke, welding smoke o fine dust, smoke o solvent vapors, adhesive vapors o oil mist, emulsion mist Volume IF_1300: 1270 m³/h Volume IF_1700: 1700 m³/h Volume IF_2400: 2400 m³/h Volume IF_900: 900 m³/h...

... small package. The wire rope isolator products operate reliably even in aggressive environments, are nearly maintenance-free, and highly resistant to oil, ozone, abrasives, and chemicals. By using compact wire rope isolators, the number of premature failures and costly machine downtimes can be reduced. Even in non-standard applications, you may still be able to use standard wire rope isolators. These standard products are suitable for nearly any...

...All information at a glance: "Cemo UNI-Tank 750 l for Diesel, RME (Biodiesel), Fresh and Used Oil" External dimensions (LxWxH): 980 x 770 x 1420 mm Capacity: 750 l Single tank with permanently connected base feet (not approved for transport when filled, alternative: MULTI-Tank) Approved for the storage (DiBt) of fresh and used oil with a flash point > 55°C, also in water protection areas and in...

... as polishing paste, paint, plastic, release agents, oil carbon or lime can be easily removed by using the right cleaner. The workpieces are cleaned within a few minutes. The cleaning result is always perfect and reproducible. The subsequent rinsing process is followed by stain-free post-cleaning or preservation. The WIWOX® ultrasonic cleaning process can be used for all steel moulds as well as brass and copper parts. Especially tools for injection moulding, extrusion, rubber processing, aluminium die casting and gravity die casting.

... software: Basic evaluation software and driver included Power supply: 5V Plunger actuation: Spring force Application: Inspection and quality control in assembly and production lines or multi-channel measuring devices in harsh environments Measurement range: 10mm/25mm/50mm/100mm Accuracy: 3 μm(p-p) to 4 μm(p-p) depending on the model Resolution: 0.5µm Reference point: 1 Interface: USB 2.0 Maximum response speed: 80m/min...

... • Aluminum sulfate solution • Ammonium thiocyanate solution • Ammonium sulfate solution • Pickling baths • Caprolactam • Cellophane bath • Iron sulfate solution • Filament fiber spinning bath • Glycerin-water mixture • Potassium hydroxide • Potassium magnesium solution • Calcium chloride solution • Kerosene-oil mixture • Lactam-water • Sodium aluminum...

... automated, eliminating the need for complex reconfiguration of the device. Pre-set standard methods further simplify your work and save measurement time. - Optimal for oil and gas, petrochemicals, the chemical industry, and the polymer industry - Compliant with common international and national standards (ASTM, EPA, DIN, ISO, EN, etc.) - Modular principle allows for individual customization of the system – if your requirements change, expansion is always possible - HiPerSens detection combines a wide, linear measurement range with the highest detection strength Type: C/N/S/Cl Elemental Analysis...

... lubrication properties - Creeps under dirt and stubborn grease and oil residues - Allows for easy removal of labels and adhesives - Silicone-free - Smart Straw version with integration into the spray head for precise dosing in hard-to-reach areas...

...Temperature control devices in various designs Temperature control devices for water up to 95°C, pressurized water up to 180°C, and heat transfer oil up to 340°C. Each device can be equipped with different heating, cooling, and pump capacities. Direct cooling (mixed water principle) or heat exchangers regulated via solenoid valves or motorized control valves. Heating via SSR relays. Electric or externally heated (hot water, steam, or oil). Peripheral wheel pumps, single or multi-stage centrifugal pumps, magnetically coupled pumps. Enclosures also available completely in stainless steel.

...\nMaximum operating temperature 80 °C\nMetal parts made of galvanized steel\n\nFilter Medium\nSpecially developed multi-stage filter medium for the separation of liquid particles\nHigh absorption capacity due to multiple filter stages\nReplaceable pre-filter\nSeparation efficiency of 99% for particles sized 1 to 2.5 μm\n\nSpecial Versions\nTemperature resistant up to 100 °C\nMetal parts made of stainless steel\nOther custom solutions\n\nService\nWe advise you on the design of the filter elements."}...