led board Germany

... reproduction. The short-wavelength and high-energy UVC radiation required, in the wavelength range of 220 to 280 nm, has so far been produced by toxic mercury vapor lamps. This is an outdated and highly concerning technology that has been banned in the EU with some exceptions for years and can now finally be successfully replaced by LED technology.

... – 70°C (individual converters up to 85°C). With dimensions of only 35.0 x 86.0 x 60.5 mm, the SBC power module with LED indicator can fit anywhere and can be securely mounted on a DIN rail TS35 in the device. For many other SBC models, PEAK electronics can provide specially adapted versions with individual operating voltages, both on the input and output sides, and in various power levels...

... supply used, multiple LED boards can be operated in parallel. • Additional boards are available in white, controlled white, RGB, and RGBW, as well as in constant current (CC), upon request. LED Board (round) Dimensions: Ø230mm (d) Number of LEDs: 49 Article number: 50754067 CRI: 85 Energy efficiency class: A+ Color temperature: 4000K Color: 840 Power: 10.9W Lumen: 1,316lm Lumen/Watt: 121lm/W...

... LEDs/m at 24V technology, they consume 19.2W/m and achieve up to 2721lm/m. The 10mm wide strips can be cut every 5cm. These LED strips must be mounted on thermally conductive material with sufficient cooling surface. Light color: 2700K warm white LEDs/m: 140 Voltage: 24V Power: 19.2W/m Luminous flux: 1944 lm/m Width: 10mm Cuttable: every 5cm...

Visual Electronic specializes in the design, development, and production of display devices for indoor and outdoor use. For over 20 years, we have been delivering visualization systems that are used almost worldwide. Our product range includes: • Numeric large displays and built-in displays • Alphanumeric large displays • Display boards • LED matrix displays RGB • Small displays and coding switche...

... allows circuit paths to be directly mounted on the electrically insulating components. The use of a conductive intermediate layer between the circuit board and the heat sink becomes unnecessary, minimizing the overall structure. This opens up design possibilities. Additionally, hybrid components are also feasible, where copper wires can be directly integrated as circuit paths.

... city. With a range of up to 15 km and a top speed of 12 km/h, this hoverboard is the perfect way to get from A to B quickly and environmentally friendly. Thanks to the built-in Bluetooth feature, you can stream your favorite music directly from your smartphone while riding the hoverboard. The board also features LED lights that will safely guide you through the night. The appealing design of the Hoverboard Gyroscooter Smart Balance Board is modern and contemporary. You can choose from various options.

... load - Collision protection - Low noise level: < 45 dB - Frame color: powder-coated in black, silver, or white - Control element: LED display with 4 memory positions - Abrasion-resistant plastic floor glides for secure standing - Includes leveling adjustment up to 10 mm Available Options: - Decorative tabletop - Tabletop thickness - Tabletop size - Frame color Your Benefits: - Made in Germany...

... LEC200 from SIKO has been designed to meet these requirements. Reproducibility ±1 μm max. Resolution 0.2 μm max (LD output circuit). Reading distance ≤0.2 mm. Operates with magnetic tape MB100/1. Signal period 1000 μm. Sin/cos or LD output circuit. Function LED and status display.

...Novelis offers industrial aluminum coils and sheet in alloys for the main board and back cover of LED TVs and LCD monitors. Leading LED TV manufacturers, including Samsung and LG, call upon Novelis to supply critical parts such as back panel, bottom chassis, bezel and stand structures for some of the largest, most brilliant displays on the market today.

... circuit board. The built-in lamp socket T1 additionally allows for full-area illumination with LED. VARIANTS ➔ Illuminated pushbutton ➔ Signal light MAIN APPLICATION AREAS Signal construction Measuring - Controlling - Regulating Chemical industry SPECIAL FEATURES RAFI Click mounting technology Installation depth behind the front panel only 30.7 mm with spring strip Gold contacts for secure switching Polarity-proof connection DESIGN Installation diameter 16.2 mm Pushbutton and signal light available in 3 different shapes Full-area illumination with LED Lamp socket: T1 Three...

...RAFI Eltec has over 20 years of experience in the special technology of Chip on Board. This has led to a significantly higher understanding of processes and quality beyond standard technologies and their limits. As a result, we meet the requirements for a flexible and reliable realization of technically demanding customer requirements. In this regard, we set the benchmark. Technologies Chip on...

...Price Displays with SMD LEDs Hitechled has not only come up with a modern, highly readable digit design for the new HDP series, but has also revamped the protection of the circuit boards. The electronic components are coated with a uniform layer of silicone resin. Additionally, the control board is protected by a Plexiglas cover. All price displays can be ordered with either 4 equally sized digits or a smaller final digit. Up to 8 products can be displayed per side of the price pole. Digit Height: 10 cm LED Colors: white, red, amber, green...

...Glass Board made of tempered glass on a metal collapsible frame with wheels. With black powder coating. A premium look. Adjustable LED RGB backlight. Fluorescent markers are highlighted, clearly visible, both when shooting videos and when using offline, they can be easily erased from the Board with a normal napkin/cloth. + Pack of markers as a gift! ...

... unplugging the transformer cable, the board with the light can be easily removed, allowing the grand piano to be closed. The light tube is rotatable, and the illumination can be adjusted by the pianist themselves. Application: sheet music stand lighting, menu lighting. Material: Brass, Light source: Mono LED, Energy efficiency class: F, Color rendering index: 90, Light color: 3000K, Board dimensions: 380x250x12 mm, Total weight: 900 g, Rotatable light tube: Ø 14 mm, Support tube: Ø 6 mm, Support extension: 190 mm Manufacturing: Handcrafted from brass Surface: Glossy brass...

...Round LED board with aluminum core, for mains voltage Operating electronics on the board High light output, efficient, good color rendering With terminal blocks on the board Measure Tc temperature on the board at the LEDs Dimmable with phase-cut dimmers For grounding, the back has protection class: 1 Protect the front against touching Suitable covers: - 035797 transparent - 036342 opal Light color neutral white...

...emsLICHT LED workplace pendant lights for your office impress with their timelessly simple, elegant design. The microprism alabaster cover ensures comfortable lighting - reflections and glare on screens are avoided. An additional upward-facing LED board for the indirect light component creates a pleasant room atmosphere. The light and presence sensor provides automated lighting control.

...Approximately postcard-sized, with a separable circuit board in the middle. 80 LEDs (5mm) are electrically divided into 10 groups of 4 LEDs each. Each group has its own resistor.

...Flexible UV-LED panel embedded in silicone on a flexible circuit board. With accompanying analog control for flicker-free lighting.

...Product Information "Unicorn 'Solar Flare' LED Dartboard Lighting with Integrated Surround" The innovative LED board lighting from Unicorn provides optimal illumination for the dartboard without casting shadows. The integrated surround behind the fiberglass ring can be attached to the dartboard in seconds without any tools, resulting in perfect 360° dartboard lighting. Front made of durable aluminum. Good Darts! Dartboard not included. Further Links to "Unicorn 'Solar Flare' LED Dartboard Lighting with Integrated Surround" Questions about the item? More products from Unicorn...

...) "The images used are representative. Ava Led reserves the right to change technical specifications." Pixel Pitch: P6.67 - P8 - P10 Panel Size: 960 mm x 960 mm x 105 mm Panel Weight: 25kg. / 27kg. Panel Material: Cast aluminum / magnesium Waterproof: Processor and computer Brightness: > 6000 nits -> 8500 nits LED Type: SMD2727 / SMD3535 Refresh Rate: 3840Hz Power Consumption: 300W-800W IP Rating: Back IP54 / Front IP65 Control System: Novastar Processing: 14 bit / 16 bit / 18 bit Cooling: 4 fans Usage Area: Open area Certifications: CE / EMC / LVD-ATR-EUR1...

...Quick and direct input via Bluetooth. Editable texts - up to 6 characters per line. Pre-programmed standard information. Ultra-bright LED display - dimmable. Tested in racing conditions. Long-lasting battery. Especially lightweight - weight only about 5.5 kg. Made from high-quality carbon. Dimensions approximately 65 x 93 x 3 cm. With anti-glare screens. INCLUDES Battery charger! Software and Bluetooth stick!

Die Struck – Leuchten GmbH & Co. KG is one of the leading German manufacturers of technologically high-quality light advertising systems. A large part of the breweries in Europe counts among our customers. In addition, we serve other clients from the insurance, banking, lottery, capital goods and furniture industries, energy companies, as well as renowned manufacturers in the toy and clothing sect...

Display Systems. LED displays, screens, TFT industrial monitors, communication systems; automation, displays; interface; large displays; LED; LCD; pick-to-light; built-in displays; text displays; graphic displays; paperless order picking; fieldbuses; software development; displays; product development; Profibus; industrial communication; product development and manufacturing. We are an internatio...

...Most of our modules operate within the wide temperature range (-20°C to +70°C) without negative voltage. A contrast-voltage of ~ 4,5 Volt is required (against Vdd). The twist of 240° results in excellent contrast and improved viewing cone. We use a 16pin version PCB with optional pins for the LED-backlight (A/K). Our modules have LED-limit-resistances already on board. These resistors can be...

...Alpha Signs develops, supplies, and installs illuminated displays, menu board systems, LED showcase solutions, and provides metal and plastic components to shop fitters. We offer complete shelf and valance lighting as a system or custom-designed, as well as our bespoke LED lighting solutions. We have state-of-the-art plastic processing and screen printing machines, allowing us to implement short-term promotions cost-effectively. Whether it's a product launch or special promotions, we support you in development and implementation!

... flush, 2 exhaust fans 170 m³, 2 electric convectors 500 W, 2 glass LED lights 8W, Roof insulation: 160 mm mineral wool board Ceiling cladding: double-sided coated chipboard (V20), 10 mm thick, decor white Wall insulation: 45 mm PU element Interior wall cladding: galvanized steel sheet, 0.5 mm, color: white (similar to RAL 9010) Floor: 20 mm thick chipboard Floor insulation: 60 mm mineral wool Including stacking pockets Center distance: 900 mm, clear dimension: 225 x 80 mm, including 4 crane eyes Weight: 800 kg...

... better), one to three DVI-I ports, three SATA ports, CFast port or similar (onboard) - Audio in/out - 1 or 2 RS232/RS485 ports - 8x GPIO - Onboard temperature sensor - Two fan control lines onboard - System battery (onboard) - Power monitoring LED (onboard) - One PMC/XMC (125 mm x 165 mm) - Two PMC/XMC Mini ITX (200 mm x 165 mm) Power - Input voltage 10 - 32 VDC (onboard DC/DC, fused) - Reset button environment...

... battery, you have all the benefits in one model. Furthermore, the laser features a solid, very robust, and compact housing of only 25 cm, making it suitable for curves and pipe sizes starting from 150 mm, as well as large rubber feet for a slip-resistant stand. We always recommend purchasing a second replacement battery for €92. However, in an emergency, you can also insert 4 standard mono battery cells and work for 50 hours. Included: Class-2 laser, base plate, target board, remote control, battery, charger, user manual, and case. These Spectra lasers come with a 5-year warranty on the device!

...The metal core or IMS circuit board is an excellent alternative to the standard circuit board. Heat dissipation is achieved with the help of an aluminum core in the circuit board, allowing for higher packing density, longer lifetimes, and greater reliability in applications such as LED technology and high-performance transistors. The integration of the cooling unit into the circuit board also results in space savings.