iron forming Germany

KB Schmiedetechnik GmbH is a family-owned forging company with approximately 100 employees, specializing in small series of safety-relevant forged parts made from all types of steel - including duplex and titanium. Extensive approvals for pressure equipment, shipbuilding, and nuclear technology. Raw part weights from 200g to 130kg and maximum length: 600mm. We manufacture according to the followi...

... components – iron, aluminium, copper and plastics. These are then made available again to industry as secondary raw materials. We equip our clients with extremely tough and hardwearing shredder disks and thus contribute to costconscious handling of resources. ...

...The external thread of SPIROL's self-tapping threaded insert forms an internal thread in a pre-formed or pre-drilled hole during the installation process in a plastic assembly. SPIROL Series 10 Self-Tapping Threaded Inserts are thread-forming inserts that are best suited for softer thermoplastics or thermosets. Self-tapping threaded inserts provide the best pull-out strength for an insert...

...To connect two aluminum profiles at right angles 1 Profile connector 90° (Set) Model: Steel, slot 8 - 10 Surface: Zinc plated Set 1-I: 1 profile connector 90° with 1 self-forming screw S7 x 22 or S8 x 25 Set 2-I: 1 profile connector 90° with 1 screw M8 x 22 or M8 x 25 Set 1-B: 1 profile connector 90° with 1 cutting bush S12 and 1 screw M8 x 25 Set 2-B: 1 profile connector 90° with 1 threaded bush M12 and 1 screw M8 x 25 Material:Steel Surface:Zink planted...

...Processing of almost all materials such as: cast iron, steel, stainless steel (V2A, V4A, etc.), non-ferrous metals, aluminum, plastics, hard fabrics, etc. We are also happy to be your cooperation partner, meaning your contact for turning, milling, drilling, and grinding, taking on overall responsibility including heat and surface treatment. Turning parts up to Ø 70 mm (in bar), up to Ø 300 mm (in chuck), milling parts up to the space corner dimension 600 x 400 x 500 mm...

...Internal Profile Machining Keyed Tooth Profile DIN 5481 Wedge Hub Profile DIN ISO 14 (DIN 5462/5463/5464) Toothed Hub Profile with Involute Tooth System DIN 5480 and DIN 5482 (old standard) Wedge Slot Square and Hexagonal with SW 4 to SW 52 Special Profile Dimension Ø 5 to 100 mm Machining Length 5 to 300 mm Material Cast Iron (GJS, GJL, GS) Construction and Machine Building Steels with Rm up to 1000 N/mm², Stainless Steels Non-Ferrous Metals, Plastics Single Parts to Medium and Large Series...

...As a metal processing company with many years of experience, we can offer you extensive options to bring your personal ideas to life. These include: • Laser cutting • Punching • Drilling • Turning • Milling • Welding • Bending • Grinding • Painting In addition, we can process almost all metals (stainless steel, aluminum, cast iron, sheets, etc.) and incorporate other materials, such as glass...

...With rapid heating machines from Löcher, metals such as iron, copper, brass, and aluminum are brought to the right temperature in no time. The hot forming of the materials takes place under the highest quality standards. Of course, the systems can be customized according to your wishes and specifications.

...We process all conventional iron and non-ferrous metals, as well as spring band steel and thin sheets in thicknesses ranging from 0.05 to 3.0 mm. If necessary, the corresponding punching and forming tools are manufactured in our own tool shop.

...Features: - Flow rates to 160 GPM - Pressures up to 1750 PSI - Temperatures up to 140° - Rotation speed: 3500 RPM - Installation: wet or dry well - Lengths to 31´´ - Case: Resistant polymer coated - Spindles: Nitrified steel Applications: Lubricating systems for: - Speed variators - Turbines - Gearboxes - Papermill machines - Hot forming machines Used in these industries: - Petrochemical - Iron and steel - Mining - Shipbuilding...

... only experience makes the difference. For more details, please refer to our data sheet. Application examples • Lead frames & stamping plates • Contacts & current conductors • Rotor/stator packages • Frames, cages, mounts • Springs Available materials • Iron metals • Non-ferrous metals • Light metals PDF link: https://www.lcpgmbh.de/fileadmin/user_upload/Datenblaetter_Designrichtlinien/09_LCP_DB_Praezisionsbiegen_dt.pdf...

...zirconia is a popular construction material among designers. Special properties: - Low thermal conductivity (good thermal insulator) - Highest bending strength - Very high fracture toughness - High thermal expansion (similar to steel, cast iron) - E-modulus similar to steel - Very good tribological properties - High surface quality Applications: - Dental parts - Nozzles - Metering sleeves and pistons - Drawing and forming tools - Adjustment rings - Positioning pins...

... forming tools in various designs. - Excellent utilization is possible, as multiple, even different parts can be clamped and processed sequentially – of course, also in unmanned shifts. - In aircraft manufacturing for trimming fairing parts, stretch forming parts, rudders, etc., or for special applications in acrylic glass, such as cockpit windows. - In boat and shipbuilding, e.g., for the production of laminating molds, deck structures, etc.

...Turning, Milling, Drilling, Bending, Sawing, Welding, Painting TURNING: The machining of almost all metals on the lathe is feasible. MILLING: Our milling machine allows for a variety of milling operations. DRILLING: Drilling in all common material thicknesses is possible. BENDING: Rolling bending and mandrel bending is possible with a variety of materials, e.g., flat iron, L-angle, profile steel...

...Our Italian partner has been involved in electroforming and hot forming of iron and steel since 1967.

...Coolant Concentrate Water-miscible, mineral oil-based coolant of the latest generation for chip-forming machining of steels, gray cast iron, and aluminum alloys. High skin compatibility, highly efficient. Typical mixing ratio 1:20: 1 liter of concentrate yields 20 liters of coolant. Country of manufacture: Germany Weight: 10 kg net...

... ensures the optimal quality of its products. Continuous improvement and monitoring of quality objectives are at the core of the company's philosophy. Our business areas Quality Wire: Steel wire Automatic steel wire Bright steel Cold forming wire Iron wire Aluminum wire Construction Steel: Cold ribbed concrete steel (KR) Storage mats Welding Consumables: Unalloyed and low-alloyed shielding gas...

... welded parts for rail vehicles. We manufacture customized and according to samples! This also includes metal parts, milled parts, turned parts, and welded parts! Since 1932, we have been providing tailored solutions at the highest quality level. Our product range: The extensive machinery and personnel expertise in the areas of forming, CNC, and conventional machining enable us to offer everything...

...cutting, rolling, or forming. Materials We standardly process the following materials: Aluminum, all types Brass, all types C-steels Quenched and tempered steels Automatic steels Stainless steels ETG 88 and ETG 100 ESP 65 Mass production (from 5000 pieces) To completely process complex workpieces and produce them in medium and large batch sizes, we use our...

Cold forming with multi-stage presses (up to 5 stages) Pressing force up to 1,300 kN Wire diameter: 3 – 16 mm Underhead length: up to 130 mm Head diameter: up to 30 mm Material Steels from magnet soft iron to high-quality construction steels, stainless and corrosion-resistant stainless steels, aluminum alloys, non-ferrous metals Machining Machining processes such as – Cutting internal threads...

...), Ductile Cast Iron (EN-GJS), Cast Iron with Vermicular Graphite (EN-GJV) Steel: High and low alloy steel, heat-resistant, structural steel, hot, cold, and high-speed steel Non-Ferrous Metals: Aluminum, Copper, Brass, Zinc Casting Processes: Sand Casting, Centrifugal Casting, Die Casting, Gravity Die Casting, Full Mold Casting, Continuous Casting, Investment Casting Forging Processes: Die Forging...

... materials such as zinc, copper, and aluminum exhibit excellent cold formability. This cold forming process, involving mechanical action on the material, led to the creation of the first metal roofs in China around 2000 years ago. In the post-war years, roofs needed to be replaced quickly and in large quantities. Zinc and galvanized steel roofs, coated with bitumen, were used for this purpose...

... impeccable quality, reliability, and intensive, solution-oriented consulting on our part. Customer satisfaction, combined with a trusting collaboration of our highly qualified specialists, ensures our long-term business success. We process aluminum, copper, brass, stainless steel, and steel of various alloys, as well as pure iron and special materials from iron-nickel compounds such as Vacodil, Vacon, and Permenorm.

As a traditional company, we have been at home in the world of warm forming (die forging) since 1884. Our core competence lies in the production of forged parts made of steel, forged parts made of stainless steel, and forged parts made of aluminum in the weight class of 0.1 – 6 kg. In addition to forging, we offer further processing of the forged parts, also known as forged pieces, through...

...We process: Iron, brass, nickel silver, and lightweight metal alloys from wire and sheet. All surface finishes or coatings are carried out professionally according to your specifications. Meditec Branscheid GmbH&Co.KG manufactures metal fittings and uniform insignia for every need, even according to samples and drawings. Do you need, for example . . . Round, half, triangular, square, or...

Cold drawn wires made of alloy steel, tool steel, or iron wire and boron alloyed. Surfaces according to customer specifications such as bright, shiny, copper-plated, phosphated, hot-dip coated, or oiled.

EUGEN ROLD GmbH specializes in the design and manufacturing of precision tools. The product range includes molds for plastic processing and cutting and forming tools. The customer portfolio includes companies in the automotive, precision engineering, packaging, electrical, electronics and telecommunications, aerospace, mechanical engineering, and sanitary sectors.

Manufacturing and distribution of lightweight metal die-cast parts, in-house tool making, powder coating, and mechanical processing...

The company ALUPUR stands on two pillars that ensure the success of aluminum distribution. On one hand, the company is globally connected and has successfully represented manufacturers of aluminum semi-finished products from Germany, Europe, and Asia for years – with a corresponding product range. On the other hand, ALUPUR is increasingly focusing on the service sector by establishing a warehouse ...

We manufacture presses with pressing forces of up to 20,000 kN. The main focus is on hydraulic and spindle presses. Furthermore, we carry out repairs of all kinds on presses of all brands. Special attention is given to restoring safety, even on older machines. As a long-standing producer of spindle presses, we have improved them to the point where they are indispensable in modern forming technology and often replace hydraulic and eccentric presses.