industrial extruded Germany

...This treatment gives PROF2000 the same surface structure as post-painted extruded materials, so the two materials match seamlessly. It is commonly used for facade cladding, interior cladding for tunnels, as well as other industrial applications.

...The Eder Group offers high-quality round tubes that are characterized by their strength and versatility. These products are ideal for various industrial and construction applications. Product Features: - Geometry: Round tube - Materials: Cast aluminum, extruded aluminum, drawn aluminum, bare steel, bronze, drawn/sanded stainless steel, rolled/forged stainless steel, gray cast iron/spheroidal cast...

...Extremely simple pipe connection, without annoying transitions - The connecting pipes cut to the required length can be connected to the ITAS extruded aluminum pipe fittings using a simple plug-in principle. No further mechanical processing is necessary. This minimizes assembly effort. An internal tensioning mechanism and tightening special clamping screws ensure force-fit connections and a...

...Sectional doors made from aluminum frame and panel constructions provide an almost transparent separation between indoors and outdoors. The ideal solution where maximum light yield and transparency are required. AST sections are manufactured from extruded aluminum profiles with a high-quality connection system. The profile dimensions are determined by the dimensions of the door leaf. The infill of the panels is done with fully or partially transparent, single or double panes, perforated or single-wall infills, as well as closed, double-wall "stucco sandwich infills."...

...) — Depths from 75 mm up to max. 370 mm — Rounded edges, no risk of physical injury — High-quality extruded aluminium sections (naturally anodised) — Customised colours from RAL range — Optimum heat dissipation due to aluminium sections — Integrated recessed grips for simple handling — Protection class IP65 — Internally-mounted front panel — Door configurations for direct access to the interior — Slimline design for configuring flat screen systems Configuration:modular Material:aluminum Protection class:IP65...

... necessary for the downstream die. The pressure accumulation in the gear pump can be much more efficient than in the extruder itself. The extruder is relieved by using an extrusion pump. Additionally, much less energy or heat is introduced into the polymer. The melting pump thus helps to convey the product as gently as possible. The EXTRU is essential for the production of precise films or micropellets. Medium: melting Operation: electrically driven Priming: under load Technology: gear Domain: industrial Other characteristics: extrusion, for masterbatch...

...aluFACE is an extremely versatile and adaptable command container, available in six different versions made of die-cast aluminum with a window featuring extruded aluminum profiles. It is ideal for any type of command and industrial information technique. Inside, mounting domes for motherboards, support rails, or mounting plates are already pre-installed. You can find the appropriate suspension system in the corresponding product category on the ROLEC website. EN AC 44300/EN AC-44200 (DIN EN 1706): Aluminum...

... actuators are offered with two motion systems: ECO SYSTEM – SP Featuring a maintenance free recirculating linear guide rail fitted inside the profile. ECO SYSTEM – CI Featuring four rollers with a Gothic arch outer profile sliding on hardened steel bars placed inside the profile. Main fields of application for Eco System linear units: Automation Packaging Industrial machinery Available sizes for the...

...Implementation of a plastic assembly for an industrial vacuum cleaner. - Taking over the plastics engineering product development - Mechanical design of the vacuum container for dynamic alternating loads - Own development of a co-extruded sheet semi-finished product - Rheological simulations - Rapid prototyping: Construction of milled 3D prototypes from series-like materials - Implementation of...

... adaptability. With over 85 years of experience in machine engineering, KUHNE Group has developed an extrusion system that meets the highest industrial standards. The flat film extrusion is ideal for the production of films for packaging, medical applications, and the construction industry. The system is easy to operate and requires minimal maintenance, making it a cost-effective solution for companies looking to expand their production capacities.

...The Prisma series is not only extremely modern but also offers many other advantages: - High-quality extruded aluminum profiles in anodized quality - Robust glass fillings (scratch and impact resistant) - Solid fillings and perforated fillings - High light incidence through large surface areas - Very weather-resistant - Can be combined with Promotherm elements A discreet frame-mullion...

...WHM supplies hoses for all industries. From stock items to custom-made products, such as hose pieces, hose bends, compensators, conveying hoses, etc., we are your partner. Our product range: • Rubber and plastic hoses • with and without spiral • with and without fabric reinforcements • mandrel-wound and extruded hoses • PU spiral hoses for suction • shaped hoses • vacuum cleaner hoses • hose bends • as well as the corresponding fittings...

...gasoline, and many chemicals Hose Design: — interior: very smooth for minimal pressure loss — 100% highly resistant synthetic polyester thread fabric, manufactured on a circular loom, integrated into the rubber for optimal pressure support protection — a high-quality nitrile/PVC blend is extruded through the fabric (standard colors: black and yellow; others available on request) — exterior: longitudinal ribs for excellent abrasion resistance...

... utilized in numerous industrial sectors as well as in packaging, storage, and transportation. They perfectly protect sensitive objects from dust, air, and moisture, and are also easily recyclable. Manufacturing of Cell Polyethylene The manufacturing of cell polyethylene essentially occurs in three steps: extrusion, crosslinking, and foaming. For this, polymer and other additives are mixed together and extruded into a solid paste. The crosslinking is achieved using an electron beam, and finally, the foaming agent is thermally...

... bonds PMMA plastics in numerous industrial sectors, such as: • Window construction: Bonding of PMMA additional profiles on co-extruded profiles, bonding of PMMA additional profiles on PMMA profiles • Advertising industry: Bonding of acrylic parts to each other • Showcase construction: Bonding of acrylic sheets to each other...

...Delta 55 is a smooth-surfaced extruded aluminum profile – not slatted and therefore only available without light slits. The hollow chambers are fully filled with insulating foam. If light and air are needed, Safe Grill profiles can be combined. Suitable for industrial use as well as internally as a room divider. Delta 55 roller shutters are break-in resistant and tested and certified in...

...Often invisible, but always indispensable: extruded profiles in industrial plants and products.

...Our pipes and rods are used in a wide range of industrial applications. Our delivery program - Pipes: Aluminum round pipes - chamber extruded - chamber extruded and drawn Aluminum round pipes - seamless extruded - seamless extruded and drawn Alloys: EN 6005 A / 6060 / 6061 / 6063 / 6082 / 7020 The dimensions depend on the respective alloy and shaping.

... reliability under extreme operating conditions - Highest resistance to radiant heat and flames, confirmed by TÜV NORD Tube - Black smooth extruded inner layer of EPDM - Suitable for treaded and not treaded cooling water - Electrically conductive (R < 10^6 Ω) Reinforcement - Braided reinforcement in stainless steel (1.4401 / AISI 316) - Heat protection plies in braided glass fiber - Several...

... own recycling facility and reintroduced into the production cycle. For our films and bags made from recycled material, we also use PCR (Post-Consumer-Resin) and PIR (Post-Industrial-Resin) regranulates, depending on customer requirements. Additionally, a brand called PEKUGreen has been created, which utilizes renewable raw materials. PEKU prints all films according to customer specifications with up...

... non-binding offer by email within two working days. Plastic sheets | Plastic sheet cutting | Plastic cuts | Plastic sheets Heilbronn | Plastic round rods | Solid rods | Plastic sawing Heilbronn | Plastic dealer | Plastic sheets wholesale Heilbronn | Plastic sheets wholesale Heilbronn Baden-Württemberg | Custom plastic cuts | Buy plastic cuts online | Plastic sawing | Saw cuts from plastics | POM-C cuts | PE1000 cuts | PE-HD | PE500 | PEEK cuts | PEEK sheets | PVC sheets | PA6 cuts | PA6 cast sheets | PA6 extruded |...

SLS is your reliable partner when it comes to the production of hollow or solid profiles. We offer you the full range of high-quality profiles manufactured with extensive professional know-how. A selection of options: - Standard profiles - Custom designs - Ranging from 20g/m to 4000g/m - Various colors and thermoplastics - Hard, soft, hard-soft combinations in co-extrusion Profiles that require ...

SOPREX profiles are manufactured using extrusion systems that operate at the highest technical level. In addition to PVC in various forms, ABS, PP, PS, and other thermoplastics are processed into custom special profiles using both single and co-extrusion methods. These are primarily profiles for the construction, furniture, and white goods industries, as well as for system suppliers in the passe...

Kunststoff-Extrusion Lehmann GmbH is a new, young, and innovative family business, but the experience and know-how is a mature process that has developed continuously over decades. The managing director and production manager Nils Lehmann is a trained precision mechanic and has been working for more than 12 years in the field of design, planning, and production of plastic profiles. He specializes...

KEBA Fastenings has been specializing in the production and distribution of specialty fasteners since 2002. Today, the company is one of the key providers in the global market for industrial fasteners, supplying millions of components daily to small local workshops and global industrial corporations. The wide product range of KEBA Fastenings includes high-performance thread-cutting screws, cold...

WALTER POTTHOFF GmbH is a family-run system and component supplier of plastic products for the medical and industrial sectors. As a modern, sustainably operating technology company, we offer our customers tailored production solutions in the field of plastic processing. We stand out through quality, innovation, diversity, and sustainable management. At the heart of our daily work is the customer...

Extruded Plastic Profiles and Toolmaking Since 1968, Karl Peter Kunststoffe GmbH has specialized in the production of high-quality plastic profiles. At our location in Münchweiler in the Southwest Palatinate, we manufacture plastic profiles from rigid PVC, ABS, flexible PVC of all hardness grades, Luran S, and ASA – in industrial quality for the highest demands. With our own toolmaking, we...

Köster is a manufacturer of stud welding and fastening technology with its own production of stud welding machines and equipment, welding studs, head studs, and cold-formed parts. KÖCO offers you a wide range of solutions for all types of applications in various industries: • Civil Engineering / Steel Construction / Bridge Construction • Power Plants / Energy Generation Construction • Vehicle Manu...

... sheets up to a size of 3050 x 2050 mm. We manufacture according to your CAD data (dxf, etc.) or your drawings, from individual parts to small series and large batch sizes. On our CO2 laser system, we can produce laser parts up to a size of 1800 x 1230 mm. CO2 laser systems are an ideal tool for cutting and engraving acrylic glass. They are characterized by very high precision and are suitable for both extruded (XT) and cast (GS) acrylic. All common acrylic brands can be excellently cut and engraved.

Ammerflon GmbH Kunststoff- und Dichtungstechnik is an innovative, high-performance company that was founded in 1990 and is based in Diessen a. Ammersee. In 2001, we established our branch in Schiefling, Austria. We offer a comprehensive and nearly complete product range of industrial seals and technical plastics, such as seals made from expanded PTFE, sealing tapes and cords, precision plastic...