high pressure and high temperature seals Germany

...The sealing solutions for high-pressure cleaners from Kastaş are crucial for efficiency and safety in the cleaning industry. Our seals are specifically designed to withstand the high pressure and temperature conditions that are common in high-pressure cleaners. They provide a reliable seal that prevents the leakage of water and cleaning agents, thereby optimizing the performance of your machines...

... and covers the flow range from 0.19 ml/min to 1152 ml/min. The mzr-11508 is suitable for continuous delivery and discrete dosage of low and high viscosity liquids. It achieves high differential pressures and provides a low pulsation flow. Its robustness and the available accessories make it suitable for challenging applications. Advantages High dosage precision precision CV < 1% at low volumes Long...

... particularly well-suited for sealing steel flanges and steel enamel flanges under high pressure and temperature conditions. ✔ Specifications according to EN 13555 ✔ TA Luft according to VDI 2440 ✔ Fire Safe according to ISO 10497 / API 607 ✔ Blowout Test according to VDI 2200 ✔ BAM for oxygen applications Country of origin: Germany...

... products for your application directly from billi. Depending on the respective requirements, different PTFE seals are suitable for you: Our comprehensive range includes, for example, PTFE thread sealing tapes with a temperature resistance of -200°C up to +260°C. The PTFE tapes are both, odourless and insoluble. In addition, the PTFE thread sealing tapes have a particularly low coefficient of friction, which improves their performances. We also offer PTFE cord with a pressure resistance of up to 10 bar. Possible applications include valves as well as piston and centrifugal pumps.

...Precision O-rings and packings, radial shaft seals and sliding ring seals, flat and standard seals, asbestos-free and graphite packings, high-pressure and high-temperature seals, silicone sealants.

... Reduces wear Extension of the relubrication intervals High resistance to oxidation Noise and vibration-damping Resistant to cold and hot water, water vapour, lactic, formic, acetic and fruit acid, as well as alkaline and acidic cleaning agents and disinfectants Good elastomer and plastic compatibility For optimum adhesion, clean contamination and other lubricants from slide surfaces. Best way is to...

...novapress 260 offers top-notch performance at an excellent price-performance ratio. This standard seal is perfectly suited for general industrial applications under low to medium pressure and temperature conditions, as well as for non-critical media.

... compensates for component expansion differences and the resulting changes in the sealing gap that occur under high pressure and/or temperature fluctuations due to its design. This ensures a consistently secure seal. Spiral seals typically feature an inner support ring made of stainless steel and an outer centering ring made of galvanized steel. Additionally, there are spiral seals available without inner and outer rings. Depending on customer requirements, it is possible to manufacture custom seals.

... consumption • Compatible with all mineral and synthetic oils • "Seals" piston rings at low compression Areas of Application: For engines with high oil consumption and extreme engine loads in high-temperature ranges. For issues with running noises and exhaust smoke during initial engine wear. Container: Drum Country of Origin: Germany Content: 60 liters...

... bar (reference medium approx. 10 mPas at 20°C) Medium-contacted parts: HD-POM / stainless steel / VisChem Seals: high molecular PE, VisChem Static seals: O-ring VisChem Motor: 18 to 24 V DC, incremental encoder, planetary gearbox Operating conditions: +10°C to +40°C (Ta.), air pressure 1 bar Medium temperature: +10°C to +40°C Storage conditions: dry / dust-free -10°C to +40°C Dosing volume, approx. per revolution: 0.03 ml/rev Dosing accuracy: ± 1% Repeatability: > 99% Minimum dosing amount: 0.002 ml Volume flow: 0.2 to 3.3 ml/min...

...PTFE (Polytetrafluoroethylene) is considered a high-performance plastic, offering good temperature stability and very high chemical resistance. PTFE (Polytetrafluoroethylene) has one of the lowest coefficients of friction of all comparable plastics. Due to the very wide temperature stability of PTFE, its thermal properties can be described as "top-notch." Another characteristic is the extremely high durability of the material. Furthermore, seals made from PTFE require low surface pressure to achieve the desired leakage rate, as they are very adaptable yet tough.

...Rings made of 98% or 99.85% pure graphite (Rings: Endless, slotted, or split) Density: 1.20 g/cm³ to 1.80 g/cm³ available Color: gray/black Special Features: • Low maintenance due to high service life • Self-lubricating and soft, resulting in reduced shaft wear • Excellent heat dissipation due to high radial thermal conductivity up to 200 W/mk • Low steering current even with short packings and high pressure differentials • Individual rings can be added • Fire Safe Test passed...

... applications. With a response time of 125 ms, this transmitter ensures high accuracy and stability under all process conditions. We are the only manufacturer that performs a complete 3D linearization of its differential pressure transmitters, taking into account differential pressure, ambient temperature, and static pressure. This guarantees precise measurement even under changing conditions. The OPTIBAR...

...iglidur® sealing lip bearing d1 [mm]: Quick and easy-to-mount polymer bushing made of iglidur® J (JDSM) or iglidur® V400 (VDSM) with clip-on radial shaft seal ring as sealing for the rotating shaft. Seals off against dirt, dust as well as all pressure-less media. Polymer bushing with clip-on radial shaft seal ring Sealing for rotating shaft Temperature application range like iglidur® J...

...Certified Seals according to TA-Luft AFM 34 is an asbestos-free sealing material. It contains aramid fibers, inorganic fillers, and other high-temperature resistant asbestos substitutes that are bonded under increased pressure and temperature with high-quality elastomers, resulting in a high-strength and particularly gas-tight seal.

... seals with operating pressures exceeding 400 bar. For bellows with high demands on technical cleanliness regarding freedom from stains, particles, and film residues, state-of-the-art cleaning technology is available. Bellows with the highest cleanliness requirements are produced in clean rooms. Properties: flexible pressure-resistant vacuum-tight temperature-resistant corrosion-resistant aging-resistant torsionally stiff...

...Universal Thread Seal Tape LD made of 100% PTFE for all types of threads Dimensions: Width 12.7mm x Thickness 0.1mm x Length 10m Packaging unit = 10 rolls Material: PTFE (Polytetrafluoroethylene) = TEFLON/DuPont, = HOSTAFLON/Hoechst is - chemically resistant to all media with a pH value of 0 to 14, except for molten or dissolved alkali metals, elemental and gaseous fluorine at high temperature and high pressure, - temperature resistant from -240°C to -270°C (short-term up to -310°C), - physiologically harmless - taste-neutral / odorless up to -310°C.

... ppm Gas tightness according to DIN 3535/6: 0.5 MPa Pressure resistance DIN 52913: 48 MPa Surface pressure at 300 °C: maximum 200°C Continuous operating temperature: approx. 450 mm Plate size: 1000 mm x 1000 mm...

... rapid temperature exchange between the liquids is achieved in a very small space. No cleaning or maintenance required Another advantage is the encapsulation of both liquids from environmental influences. There is practically no cleaning or maintenance effort due to pollution from the environment. The coaxial heat exchanger also does not require any seals that require maintenance...

... Solenoid Valve: High switching cycles (up to 500,000), fast switching (10 ms), and space-saving design. Please Note: The solenoid valve gets very hot in operation, up to 80°C. 100% duty cycle is possible. Technical Data: E-1_4-24-C Temperature: -30° to 150° C Thread: G-thread Pressure: 10.0 bar Kv Value / Cv Value: 0.26 / 0.30 Coil Power: 12 W Weight: 400 g Opening Cross Section: 3.0 mm Protection Class: IP65 Seal: Viton Switching Cycles: 500,000...

... operating conditions of your parts and cost requirements, we process various elastomers/rubbers such as EPDM, silicone, PUR, NBR, natural rubber, neoprene, SBR, FKM, IIR, and thermoplastics like PTFE, PE, PA, as well as cellulose, paper, fiber materials, foams, sponge rubber, cellular rubber, high-pressure sealing materials, and high-temperature materials, nonwovens, cork, graphite, rubberized fabrics, elastomer films, and multilayer.

...This bourdon tube pressure gauge with switch function (electrical contact device) has been especially constructed for the operation with diaphragm seals. A custom bourdon tube that is reduced in volume produces a very slight temperature error. Diaphragm seals with reduced diaphragm surface areas may also be used. A large selection of LABOM diaphragm seals is available for a variety of...

... has an excellent wear and extrusion resistance under extreme working conditions. It allows a fine lubrication film passing this first barrier, ensuring the necessary lubrication of the secondary sealing element for long service life. The ”tandem arrangement” requires an outstanding back-pumping ability of the primary seal and the secondary seal, if a double acting scraper is installed. Size range:40 mm to 140 mm Temperature:-35 °C to 110 °C Speed (max):1 m/s pressure (max):40 MPa...

...The high-pressure filter is used for the purification of gases. The filter can be equipped with a filter element ranging from 2 to 150 µm. The housing is equipped with a drainage or venting screw. Series version Nominal diameter: DN 6 to DN 50 Nominal pressure: up to PN 260 bar Operating temperature: -30 °C to +80 °C Installation position: vertical Connections: threaded connections Operating medium: gases Materials Housing: 2.0967 Filter element: 2.0958/ 1.4401 Seals: NBR/ PA6.6...

... is measured, that after reaching the block storage, the recovery behavior fully exists. A overpress of the sealing-material is basically excluded. Benfits of IBK SAFE-H® Seal: Secondary friction connection (block storage) Seal is chambered (secured against exhaust) High resilience of the flange connection Indenpendently pressure stage dimensions Easier to install regarding centring gauges Simplified warehousing High temperature resistance (up to 1000°C) High pressure resistance (up to 525 bar) Possibility of redefinition of the sealing zone with repair set...

... hand into extremely thin films. Even high applied pressure cannot destroy this film. Aging resistant, UV light resistant, waterproof, shrink-free, water vapor tight, seawater resistant, and anti-corrosive. Applications: Sealing agent used between metals, wood, plastics, organic glasses, and silicate glasses with each other and among themselves. The purpose is to seal riveted and screwed joints...

... diameters. Application area Universally applicable for sealing steam, water, acids, alkalis, organic and inorganic gases, aliphatic and aromatic hydrocarbons, alcohols, ethers, ketones, etc. Pure graphite sealing elements cannot be used for sealing strongly oxidizing media (e.g., concentrated sulfuric and nitric acid, fluorine, chlorine, etc.) Operating conditions Temperature -200 °C to +550 °C Pressure up to 30 MPa (300 bar) pH value 0 to 14...

... on-site replacement • Short and interchangeable probes • Suppression of false signals for reliable measurements • High accuracy (± 2 mm) and large measurement range (small dead band) • Easy and time-saving adjustment • ATEX approvals (Ex d, Ex i, Ex t) • Electronic module with SIL2 • Many different process connections and probe types for a variety of applications Approvals: ATEX, IEC-Ex, FM, INMETRO, TR-CU Process temperature range: -40°C to +200°C Pressure range: -1 bar to +40 bar max. Sensitivity: DK value ≥ 1.5...

... individual tube seals) • CORE-THERM (high-pressure version up to 10 bar with SiC tubes) • Horizontal Evaporator (process component with optimal temperature difference) • Thin Film Evaporator (temperature-sensitive evaporator for development and production)...

...Velocity [v max]: 1.5 m/s Pressure [p max]: 500 bar Temperature: t = -200… +280 °C pH: 0 - 14 Density: 1.65 g/cm³ Main application Valves Fittings Gate valves Flaps Plunger Door and lid seals Suitable for Pulp and paper industry Chemical industry General Industry Form of delivery This packing can be manufactured from 3 to 40 mm square as well as in intermediate, inch sizes and special measurements. 03 - 09 mm on 1 kg spool 10 - 15 mm on 2,5 kg spool 16 - 25 mm on 5 kg spool Special length, pre-cut or die formed rings on request. 1 kg of packing of the following cross-sections is...