die-cast aluminium Germany

...extruded heat sinks, die-cast heat sinks, as well as finger heat sinks and U-shaped heat sinks, along with the corresponding accessories like mounting clips for fastening. Extruded profile heat sinks are considered classics among PC board heat sinks. We gladly recommend them for use in the board area as they are versatile and can dissipate relatively large amounts of heat.

...aluPLUS is a modern enclosure made from die-cast aluminium for industrial electronics and electronic applications. It is available in the usual standard industrial sizes for the attachment of terminals, PCBs or mounting plates. The areas of application are numerous. aluPLUS is suitable for attachment to the wall outside and for industrial electronics and mechanical engineering. The lid has a...

...Plate connector (set); To tee and Length-connect two aluminum profiles different sizes: — Profile 30, 40, 45, 80 — profile groove 8 or 10 Material selection: — Die-cast aluminium blank or aluminium-color — Zinc die-cast blank or aluminium-color — Plastic PA, glass fibre reinforced (black) Available separately or with various mounting setswith hammer nuts, T-slot nuts and (self-forming) screws! Other surfaces and other colors on request...

... setting of the blind rivet nuts • Threaded mandrel protection via spring ring for fast tool-free replacement of the threaded mandrel • With opening spring for simple handling • Body in high-quality die cast aluminium • Body head made of forged chrome-vanadium steel • Ergonomic handles Material:Aluminium, plastic, steel...

... Features: — nominal pressure: 0 ... 400 mbar up to 0 ... 600 bar — accuracy: 0.1 % FSO — turn-down 1:10 — two chamber aluminium die cast case or stainless field housing — internal or flush welded diaphragm — HART®-communication — explosion protection: intrinsic safety (ia) Optional Features: — explosion protection flameproof equipment (d) — SIL2 -version according to IEC 61508 / IEC 61511 — integrated display and operating module — special materials as Hastelloy® and Tantalum...

... operating safety. Mechanics The new tank sensor ITS 60 is characterized by a particularly stable, but light mechanical system specially designed for “Heavy Duty Applications”. The mounting flange and measurement tube are constructed from die cast aluminium. This construction permits the insertion of tank sensors up to 1200 mm in length, without additional support on the tank floor. The flange hole distribution is compatible with commercially used tank sensors. This means that this system can be used without expensive conversions.

... (1 mA / 24 VDC) • Up to 4 contacts • Enclosure: Die-cast aluminium • Cover: Aluminium • Easy turning (8 x 45° ) and changing of the actuators without a tool • Standard switch and standard actuator according to DIN EN 50041 • Protection class IP66 and IP67 according to EN 60529 Ambient temperature:–30 °C to +75 °C...

...Stator housings, bolted feet, endshields, flanges and terminal boxes made of die-cast aluminium, available in frame size 56 – 180.

...Email : trasmme@gmail.com SKYPE : TRAS MM ============================== ALUMINUM SCRAPS We can supply you with High quality 99.7% min Aluminum scraps of various types . We will offer you different types of scraps like rod, plate, wire, cable, wheel, shredded, clipping, heavies, die cast, girder, can, tank, mix materials, etc. Please below we offer most grades of Aluminum Scraps...

... head covers, etc.). THE BENEFITS AT A GLANCE Continuous workpiece processing Interruption-free workpiece loading Trough-shaped work bowl Easy to integrate in fully automated mass finishing processes Simple material handling without batch loading Industries:Automotive, mechanical engineering, forging, die-casting foundry Material:Steel, aluminium, die casting, injection moulding Applications:Deburring, smoothing, rounding edges, cleaning...

... variants with Eco mode • Wide-beam light characteristics • Variants with Light Forming Technology for optimum light deflection and glare-free lighting • Robust aluminium housing with solid safety glass screen • Die-cast side parts • High degree of protection • Chemically resistant to many media such as oils or cooling lubricants • Ideal for high mechanical and thermal stress • Direct connection to machine voltage • Lateral or rear connection by means of M12 plug connector...

... place in the downstream electronics. The waveguide is housed in a pressure-resistant stainless steel tube or extruded profile. To the rear of this is a die-cast aluminium housing containing the electronics in SMD technology. Electrical connection is implemented via a circular connector. In the rod version, the position magnet is located in a ring, which is guided over the rod without contact. In...

...The anodising process used at mbw is used for the surface treatment of die-cast aluminium. By anodic oxidation, wear and corrosion resistance, as well as the natural protective coating of the base material, are improved. Anodising increases wear and corrosion resistance. This process is suitable for rack goods ...

...Thread forming screws manufactured from turned parts – direct screwing - The economic adjustment to small batch sizes, we meet with our turned parts for the direct assembly in plastics and die-cast products. Any thread forms such as, thread-tapping (DIN7500), thread cutting (DIN 7513-7516) or KTG for direct screw in plastics are realized cost-effectively. Advantage is the elimination of high...

...Ideal for outdoor use, IP 65. Tripod with high-power COB LED light, with extra-wide light diffusion to illuminate a large area. Low heat generation, no danger of injury. Chip LEDs have an extremely long lifespan, are shock-proof, maintenance-free. Die-cast aluminium casing. Extra stable and robust tripod. Strong tubular steel, powder-coated. Stepless height adjustment from 0.8 m to 1.62 m. Handy...

... ° field angle > True fresnel optical system for good barn door beam shaping characteristics > Glass reflector with dichroic coating optimized for HPL lamp performance LAMP > HPL - compact tungsten filament contained in a krypton/xenonfilled quartz glass envelope (see table for suitable lamp types) > Uses same lamp type as all Source Four fixtures for common inventory > 375W, 575W and 750W (max.) lamp options > Patented filament geometry makes for extremely efficient light collection and transmission > Integral die-cast aluminium heat sink lamp base...

...Industrial PC with Freescale MPC5200. Key functionalities Dust-tight, jet-water-tight Can be used outside Easy to use without additional peripherals Comfortable graphic display with Windows CE Without licence fees when using Linux, graphic user interface via QT/Embedded Very robust die-cast aluminium housing with a stainless steel front...

...nduction Heating and Joining in one turnkey system. This turnkey system is used to heat electric motor housings with various dimensions for a wide range of joining processes. Example Heating System 1: the die-cast aluminium housing for an asynchronous motor (diameter 450 mm) is heated to approx. 290°C in approx. 5 minutes to fit the wound stator package. The parts are loaded and unloaded from...

...Casting Alloys for Die-Cast Parts The production of Hydro is based on primary aluminum. Consistently high metal quality is ensured through the use of high-quality raw materials and best practices. Our casting alloys are manufactured according to customer specifications in the main alloy groups according to ISO, EN, and JIS. Key Properties - Excellent castability - High and consistent metal...

... balanced relationship between tradition and progress. Today, we supply our demanding clientele from the industrial and medical technology sectors, mechanical engineering, the automotive, construction, and furniture industries across Europe with products from the areas of aluminum die casting, zinc die casting, and aluminum die casting. With our core competence in aluminum and zinc die casting as well as...

From your initial idea to final production, we guarantee the highest efficiency and quality through decades of experience in the field of aluminum die casting. With our expert advice, we support you from design to the cost-effective production of the cast part. Our team looks forward to your inquiry.

The metal goods factory Gemmingen GmbH produces components for electrical engineering, generators, and power generation systems in two plants. The metal goods factory Gemmingen GmbH was founded in 1961. In the same year, production of stamped and die-cast parts for the electrical industry began. Shortly thereafter, the production of the entire IEC standard motor series commenced, along with the...

As an innovative medium-sized company, we produce state-of-the-art aluminum die-cast components at three locations with around 1,000 employees. This makes cars more ecological, efficient, and modern. Together with our customers, we develop optimally tailored solutions and components: from metal alloys to the development and construction of special tools, to the assembly of complete assemblies...

AFS GmbH specializes in the development, production, and refinement of high-quality aluminum, sand, die-cast, or zinc cast parts. Discover our strengths. The company Aluminium Factory Siegerland has its technical development roots in the traditional company A+H Thomas GmbH. By acquiring the company’s equipment and production facilities, we have been existing and delivering our products since...

...Kuwertz Systemguß GmbH & Co. KG is your partner for systems for the automotive industry, aluminum and zinc die-casting components, galvanic surfaces, as well as tool and mold making.

As a significant, certified manufacturer of aluminum die-cast and sand-cast parts, we confidently face the technical and economic challenges of new markets. Over our 50 years of company history, we have evolved into a highly efficient foundry, achieving great flexibility as a customer foundry through motivated and highly skilled employees, investments in state-of-the-art manufacturing technology...

The development from tradition and progress has allowed SANDER DRUCKGUSS to grow into a reliable production partner for complex machined cast and system components made from aluminum die casting over more than 70 years. Increasing demands on products, particularly in the automotive and medical technology sectors, have significantly shaped and further developed the company in recent years. SANDER...

...Bossert GmbH in Geislingen/Steige manufactures aluminum and zinc die-cast parts up to a maximum size of approximately 220x220mm. We deliver ready-to-install products including mechanical processing, surface coating, and assembly. Our components are used in mechanical engineering, automotive industry, electrical appliance manufacturing, and many other sectors. Our facilities are equipped for...

...Our range of services extends from parts for machine and equipment construction, vehicle manufacturing, electrical/electronics industry, medical technology, lighting to artistic casting. We are always open to new, innovative techniques and develop new ideas for your casting as part of our R&D work. We advise you on the design of new cast parts and cast your ...

- European market leader in the technology cluster of zinc, magnesium, and aluminum die casting for over 60 years - Surface specialist for highly decorative die-cast parts - Business areas: Automotive, sanitary, household appliances, and industrial and building technology - Certifications: IATF 16949, ISO EN 14001:2009, and DIN EN ISO 50001 - Family-owned international corporate group with approximately 1,300 employees - Largest zinc die casting galvanization in Europe...