cooling-system Germany

...A complete central cooling system, including the necessary peripherals, can be set up at the deployment site in an extremely short time through prefabrication and assembly in a container, and is immediately ready for operation. This not only reduces the typically high costs associated with a facility building but also significantly lowers the installation and commissioning costs of the system...

...The low ceiling height makes the IK3000 particularly ideal for crafts operations. It entices not only by shortest cooling times, but also convinces with its many possible equipment options including optional cooking! The intensive cooling system's applications are not limited to use in trades The particularly high cooling output per chamber unit and the modular constructionkit build make the...

Our products carry a special quality seal: "Qualität Made in Germany". There are good reasons why thousands of customers worldwide trust us: We know the industries and provide concrete solutions for specific challenges. We develop technically sophisticated, robust products, manufacture them ourselves, and test them thoroughly. And we are there for our customers worldwide with our service. Frigor...

We are manufacturers of chemical products such as AdBlue, vehicle care products (de-icers, antifreeze, etc.), household cleaners, distilled water, and much more under RETAILER’S BRANDING or our own brand Robbyrob. Our headquarters is located in Berlin, Germany, and our production site is in Vetschau, Brandenburg, just an hour's drive from Berlin. We have a production site with 400,000 m² of open...

...Circulation coolers are designed according to customer requirements, ensuring that the desired performance characteristics are met one hundred percent. Our fin systems enhance heat exchange with the piping system, allowing for reduced material usage while maintaining consistent performance. The flexibility of the systems enables the pipes to be arranged side by side or stacked, thus meeting even the highest customer demands. Thanks to our numerous classifications and certifications, we can design and manufacture circulation coolers for a wide range of applications.

...Numerous production processes require heating and cooling systems. They often rely on the precise adherence to temperature gradients, such as in a printed circuit board production facility or in composite material manufacturing in aerospace. As an expert in process heating, we are the right partner for you for all questions regarding the temperature control of your process systems. All NESS...

...Our LiBr absorption chillers are available with a nominal cooling capacity ranging from 105 kW to 4.6 MW. These systems are suitable for applications with chilled water temperatures starting from 5 °C. Chilled Water Circuit (Consumer) Temperature Range (Supply) 5 °C to 15 °C Nominal Temperatures (Return/Supply) 13/8 °C Nominal Power Range 105 kW to 4600 kW Drive Circuit (Heat Supply) Temperature Range (Supply) 70 °C to 95 °C Nominal Temperatures (Return/Supply) 95/80 °C Nominal Power Range 128 kW to 5560 kW...

... sensor. Torque transducer and angle sensor located directly at the front of the main shaft, giving the best accuracy of measurement. The angle sensor is an extremely compact (PAT) rotary encoder that detects both angle as well as direction by 1 degree, signal transmission contactless. Due to the newly developed outer rotor servo motor and the composite body, the Yokota system e-wrench has the...

...Water cooling unit for use with the "EVO 200 WP" or "LITE" control system or "TETRIX 200" in connection with water-cooled welding tools. — Stand-Alone or permanent mode possible — Thermal regulation fan control system — Water flow feedback via an integrated flow meter Delivery contents: — Water cooling unit — Inverter/cooling unit connection cable (fixed) — Clamping closures for "EVO" series — 4 liters of "blueCool 10i-5" coolant...

... sensible alternative in certain cases. Especially for short-term needs, the mobile rental cooling systems from S.O.S Rentals provide a quick and straightforward solution. Our product portfolio ranges from compact 4 kW units to true heavyweights among low-temperature cooling systems with cooling capacities of up to 366 kW. This corresponds to temperature ranges from -15 °C to -70 °C. In between, you can choose from a variety of gradations and models. Discover our rental fleet now and find the suitable low-temperature system for your needs!

...We developed a special process for making fine powder systems and composites from low-viscosity melts. With the patented cryo-spraying process CSP, it has become possible to produce highly sensitive products directly from a hot melt to form a solid powder without after-cooling. The entire spraying process is overlaid with nitrogen and also protects very critical substances against oxidation and thermal stress.

...With SnowPack®, you can quickly obtain a carbon dioxide ice tablet at -79 °C weighing 50 or 250 g without a complex system or electrical connection! You have the option at any time to achieve economical cooling at very low temperatures. Examples of uses: Temperature reduction in cooling baths or cryogenic traps, pre-cooling of tissue samples, securing transport or incorporating biological...

...Comprehensive after-sales support and efficient troubleshooting in the event of system downtimes. Due to the continuously rising energy costs in recent years, we review the energy efficiency of our clients' existing hydraulic systems and are happy to advise and support you in all measures to reduce existing hydraulic power losses and in minimizing any necessary cooling power.

...Cooling chair for cooling material webs in production processes, etc. Consisting of: - stable frame - double-walled and chrome-plated cooling rollers (water-cooled via sealing head) - driven cooling rollers - maximum contact area of material to roller - pressure roller pneumatically adjustable (rubber-coated) - deflection rollers (aluminum anodized) - measuring rollers System speed: up to 100m/min Working width: up to 5,200mm Control: frequency-controlled...

... liquid - Cooling lubricant treatment in the following machining processes: · Grinding (especially hard metal machining) · Fine turning · Eroding · Rolling · Drawing (wire-profiles-tubes) · Milling - Wastewater treatment/Car wash systems - Treatment of water-like machining fluids such as quenching water during hardening processes - Treatment of washing solutions and degreasing baths Subsequent fine filtration stages can follow, such as the proven ZYKLOMAT hydrocyclones, lamella separators, or compact band filters, which...

... be controlled and maintained at a stable level. The temperature should be between 20 and 22°C. This ensures stable production for about 2-3 hours. Our system quickly adjusts the temperature With the color cooling from Duo-Technik, it is possible to bridge a temperature difference of 10°C within 4 minutes. With our own ink circulation system, it is also possible to reduce microfoam. The following technical details characterize our system: The color cooling operates with ice water (4-6 °C) The cold...

...With our recooling systems we provide a closed loop system that doesnt need any fresh water, has no corrosion issues and doesnt release sewage water, all whilst keeping your induction heating system reliably at ideal working temperatures for 24/7 operation.

...• Complete oil recovery at the source • Clean fluid system • High biostability in aqueous coolants • Long filter service life o High absorption capacities due to depth filters o 120-150 m² filter surface area per gram o Excellent dirt-to-euro-per-kilogram ratio o Filter change without production interruption • Filter material made from 100% natural fibers – 0% metals, 0% plastics o Complies with the requirements of the Circular Economy Act o Waste code 150202 • Modular design • Low energy consumption • Easy installation and operation...

...With the modular set in a simple wooden design, every buffet appears attractively structured and tidy. Whether for breakfast, lunch or evening buffets, the cooling plate can be loaded with cold cuts, cheese, fish or fruit, for example, and can also be easily replaced or refilled. Colour:Natural beech Material:Wood Painted (food-safe) Stainless steel Plastic Width:580 mm Depth:405 mm Height:330 mm...

...The pumps are designed for sampling from groundwater, have a maximum outer diameter of 44 mm, and can even be used in 2-inch sampling tubes. The pumps are sampling pumps; they are not suitable for continuous operation. The maximum operating time for 12 V pumps is 30 minutes, followed by a 30-minute cooling period; for 24 V pumps, the maximum is 5 minutes, followed by a 10-minute cooling period...

... drinking water but also of utility water and process water in industrial applications. Typical applications include: • Disinfection of drinking water, e.g., in residential and hotel facilities • Treatment of process water in the industry, e.g., in the beverage sector (CIP systems) or washing systems • Disinfection of water in humidifiers, air conditioning systems, or cooling systems • Germ reduction in cooling water circuits, e.g., in open cooling towers, cooling plants, or air conditioning systems • Sustainable disinfection of swimming pool water • Wastewater treatment in...

... Controller:Pilot ONE (E-grade "Professional") Safety class:III / FL Protection class:IP20 Dimensions (W x D x H):460 x 604 x 1465 mm Weight:215 kg Heating capacity:3 kW Cooling capacity:250 200 100 0 -20 -40 -60 -80 °C 2,3 2,3 2,3 2,2 2 2 1,4 0,3 kW Cooling machine:air-cooled Refrigerant 1. stage:R507 (1,8 kg) Refrigerant 2. stage:R23 Pressure pump max.:40 l/min ; 0,9 bar Pump connection:M30x1,5 AG male...

...Professional Custom Solutions: IKS specializes in the cooling of products and tools. Key factors for the design, layout, and construction of such cooling systems include various data: • Type of product/tool (material, size, surface) • Existing cooling time • Cooling curves • Cycle time IKS has been collaborating with universities and research institutions for years. Application-oriented test series are conducted in cooperation. Your benefit: Custom manufacturing according to specified performance parameters.

...Device for cooling the gas to separate the contained water vapor.

...The water-cooled technology ensures even cooling of the films, leading to improved material properties and higher production speeds. Furthermore, the water-cooled blown film line features a user-friendly interface that allows for easy control and monitoring of the production process. The system is designed to minimize energy consumption while maximizing production capacity. This makes it a cost...

... advantages: - no dripping or thread pulling due to programmable retraction - direct linearity between spread rate and speed - constant dosing volume even with fluctuations in density, viscosity and temperature - reliable dosing without heating the medium - Drive with spur gear motor and optional forced cooling fan - easy programming of quantity and speed - low maintenance, quick disassembly - free inlet possible, as self-priming operation...

Worldwide, industrial plants are supplied with gaseous media using AERZEN blowers and compressors. The innovative Aerzener machine technology is backed by 150 years of company experience. The product range includes rotary lobe compressors, rotary lobe blowers, turbo blowers, screw compressors, and gas meters. AERZEN blowers and compressors are quality-tested and certified according to DIN EN ISO 9...

...These consumption values can also be briefly — depending on the requirements of the individual operation — increased to up to 200 ml per process hour. In addition to this excellent advantage over the previous method, the HPM Breeze method offers further enormous advantages from an economic and ecological point of view. • For optimum use with a cooling channel diameter of 0,9 mm² and up. • Manual adjustment of the pressure parameters • Optimally suited for consistent series processes with one parameter...

...2 x 2 dosing pumps with motorised individual adjustment from 0 – 500 ml nearly maintenance-free machine with automatic central lubrication system Fully-automatic cleaning of filling machine (CIP/SIP) Quick and simplified format change (15 min.) Two filling machines enabling alternate operation/cleaning Heatable hopper (35°C – 95°C) Diversion and feeding of filled jars to the cooling zone Film applicator station Sealing station Multi-transport plate for all current jar diameters...

...Features of APROVIS FriCon: - FriCon installations are delivered ready for connection - FriCon extracts moisture from the process gas by cooling it below the dew point temperature. - The heat exchangers for gases in a FriCon system operate under high pressure, ambient pressure, and negative pressure - Condensate formation in the downstream gas pipes is prevented. - Suspended substances are separated - FriCon is available in various sizes and versions.