coated ball valves Germany

...Stainless steel ball valves with threaded ends, welded ends, or flange connections. Available in 1-piece, 2-piece, or 3-piece designs with reduced or full bore. For example, a 2-piece flange ball valve according to DIN 3202-F4/EN 558-1 in stainless steel 1.4408 (AISI 316), PN 40 with full bore. Available in sizes DN15 to DN100. The ball valve can be opened or closed using a hand lever. The hand lever is rubber-coated and can be locked (in either the fully open or closed position). Suitable for pressure ranges up to 40 bar (temperature dependent).

... pressure: DN 20 – 80 max. 6 bar (please specify when ordering) Flange connection: DIN 2501, PN 16, DIN 2533 / EN 1092-2, PN 16 Other designs: Hose insert made of NR food-grade or heat-resistant, Perbunan, Neoprene, Butyl, Hypalon, EPDM. Mantle float made of V2A, V4A, Cu, and rubber-coated steel, Float rod made of V4A and rubber-coated steel.

...Shut-off valves available in the following designs: – Flanged design – Direct flange design Housing materials • Grey cast iron • Ductile cast iron • Steel cast • Stainless steel Disc materials • GGG-coated • Stainless steel • Duplex • Halar coated • Titanium • Hastelloy • PTFE-coated...

...To minimize downtime and ensure maximum plant safety, operators must rely on 100% system isolation through shut-off valves. Our shut-off and safety shut-off ball valves are tested to the limit to meet these high demands. All our shut-off ball valves are coated for specific applications to provide the highest possible resistance to erosion and corrosion.

...In order to minimize downtime and to ensure maximum safety that calls for 100% system isolation, BORSIG offers bubble tight isolation and emergency shut-off valves that are tested to the limit to ensure performance and integrity even under the most challenging conditions. All of our isolation and emergency shut-off ball valves are coated application-specific for enhanced erosion and corrosion resistance to even withstand acids or caustics. ...

... Sight glasses Strainers Check valves Sampling systems Nominal sizes: DN15, DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN100, DN150 & 1/2", 3/4", 1", 1 1/2", 2", 3", 4" Flange connection: PN10, PN16, ANSI class 150, ANSI class 300, ANSI class 800 Length: DIN, ANSI, Manufacturer standard Housing material: GGG40+PFA, GGG40+FEP, Stainless steel Pressure rating: PN10, PN16, ANSI class 150, ANSI class 300, ANSI class 800 Shut-off element: PFA coated, FEP coated, Ceramic Seat: PTFE Lining: PFA, PTFE, FEP Connection: Flange, Thread...

...Stainless Steel Casting: SBV-PFA-4408, Steel Casting (Epoxy-coated): SBV-PFA, Optional: PFA-AS Lining (antistatic), Spindle and Ball made from a single piece C-Ball or V-Port Ball, DN15 - DN150, PN16 Two-part housing, full, round passage, spindle and ball made from a single piece, blow-out proof, C-Ball prevents medium deposition in the ball cavity, V-Port Ball for control applications. Spring...

... soft sealing can be used for fluids up to 70°C such as drinking water and untreated water and also compressed air per Certificate DVGW-G260 (Other media on request). Application fields are water supplies, dams, water treatment, pumping stations, pipe lines, industries, power plants, waste water and irrigation. Corrosion Protection: Completely coated with blue electrostatic powder coating with minimum 250 micron thickness. Size: DN 50 – 300 Pressure: PN 10 – 16 Flanges: DIN EN 1092 – 2 (DIN 2501) Face to face: DIN EN 558 – 1 series 14/15 (DIN 3202 – F4 & F5)...

...Technical data In general The actuator is especially suitable for the operation of ball valves and butterfly valves with 90°-rotation angle. A waterresistant body with overload protection and a heating device against condensation water. Material Carbon Steel, Aluminium Alloy, Bronze Body polyester coated Installation Vertical as the picture shows. All other installations only after request...

...Here we can only show the tip of the iceberg. Challenge us! Nominal diameters::DN 80 - DN 250 Length::EBRO factory standard Top flange::EN ISO 5211 Leak testing::EN 12266 (Leak rate A), ISO 5208 Category 3 Max. operating pressure::max. 1 bar Temperature range::-10°C to +60°C (depending on pressure and medium) Housing::Aluminum Disc::Ball contour 3 mm NBR white coated 90° Shore A / Oversize to housing seat, 0.3 mm - 0.35 mm Shaft::AlSI 316 (1.4401) or alternatively as specified...