battery testing Germany

...Whether it's a climate temperature chamber, vibration, or shock testing – we provide the optimal solution for your requirements. Technical Specifications: Test chamber: 3.0 x 2.0 x 1.2 m Temperature range: – 50 °C to + 180 °C Cooling rate: 5 K/min Humidity range: 10 % to 90 % r. H. Dew point: + 5 °C to + 89 °C Hazard Level 4 Co-monitoring Burst membrane Nitrogen extinguishing system...

...Batteries must be able to withstand extreme temperature fluctuations, humidity, and salt, as well as vibrations and shocks. In the battery testing laboratory, batteries are tested against these requirements under controlled conditions.

...The workshop battery testing system WBT01 is designed to detect and locate leaks in vehicle drive batteries. The device is currently available in three variants: - for overpressure type WBT01-AF - for underpressure type WBT01-BF - combined for over/underpressure type WBT01-ABF...

...For the company Digatron, we have designed the front panel of a new battery testing device in a 19'' format. The special feature of this device is that it can charge and discharge batteries with a total power of 6x 1.8 kW and currents of up to 300A through a novel electronic circuit - something that was previously only possible with an entire control cabinet. Therefore, a corresponding design...

... documentation of the test specimens). Subsequently, the batteries undergo various test cycles (according to standards or requirements). The update of the measurement data occurs at a frequency that is detailed and agreed upon with you. Should any unforeseen events occur during the testing, you will, of course, receive immediate notification along with the corresponding updated data. The data obtained will be provided to you in both raw and evaluated formats in Word, Excel, or PDF format. The transfer of the data to you will be done via email or through our SharePoint.

... controls it as needed. A digital display informs you about: - Voltage - Charging current - Charged capacity - Charging time/discharging time - Capacity at the end of the test mode The user-friendly menu allows you to set different charging currents and functions such as charging, discharging, refreshing, and testing. This charger is suitable for charging both chemical systems like Nickel Cadmium and Nickel Metal Hydride batteries. Features: - Charges NiCd and NiMH batteries (up to 4x AA or AAA batteries) - Selectable charging current from 200 mAh to...

...The Modular Docking Interface (MDI) is ideally suited for testing and measurement applications in the field of battery testing for electric or hybrid electric vehicles (EV/HEV) as well as for climate test chambers. - Rated current up to 865 A - Rated voltage up to 1,500 V DC / 1,000 V AC - Plug cycles > 10,000 - Operating temperature: -40 °C to +150 °C - Combined power and signal transmission with ODU-MAC® technology - PE via separate contact pair...

...Non-destructive testing method: Checks separators for short circuits after installation in battery boxes during ongoing lead-acid battery production.

...-strength material can help extend range, allowing vehicles to go 6-10 percent further on a single charge. With safety as a top priority, Novelis conducted extensive testing simulations to ensure its innovative, high-strength materials will protect batteries from road debris and vehicle crashes.

... and secured. The CapStar helps to ensure the safety of products, prevent leaks and reduce the ergonomic issues associated with these products without compromising on safety, quality or freshness. For optimal power management, the CapStar automatically switches to the highest voltage power source to save on battery life, yet still giving the option to pick it up and unplug to seamlessly run on battery power. The CapStar is supplied with an adjustable component fixture for measuring bottles and containers, and is available in 2Nm, 4Nm and 6Nm ranges.

...The All-in-One module 2511 is predestined for use in automated manufacturing testing of high-performance battery modules and battery packs, regardless of whether they are round, prismatic or pouch cells. In single or multichannel mode, important battery parameters such as AC and DC internal resistance or cell voltage can be recorded and evaluated extremely fast and precisely using fieldbus...

...The REA Check ER is a universal, battery-operated barcode testing device, manufactured in compliance with international standards in Germany. The REA Check ER combines a very compact and handy design with the comfort features of other REA testing devices. Its small size and construction without moving parts make it an ideal companion for mobile barcode quality control. The final statements...

...CSN® Load, Testing and Special Resistors are used to test generators and emergency generating sets to test battery capacity as dummy load when testing circuit breakers to discharge capacitors for starting, controlling and breaking of electric drives CSN® Load, Testing and Special Resistors are characterized by technically mature and proven design for operations both indoors and outdoors optimal...

... sources • Equipped with internal shielding for use up to 450 kV • Light-weight full size detector • Hot-swap function enables battery change during operation • Built-in wireless access point • Connector for Gigabit Ethernet and power • Dust-tight and waterproof (IP67) • 70 cm drop test pass...

...PTS Testing Technology provides the necessary environment and expertise for testing and simulation at every stage of development to facilitate the development of high-performance energy storage systems -...

...-operated digital manometer can be used, for example, for monitoring pressure trends and for calibrating pressure transducers. Features: — Nominal pressures: 0 ... 100 mbar to 0 ... 400 bar — Accuracy: 0.05 % FSO BFSL (Class 0.05) — Modular sensor concept — Graphic-capable display — Backlighting — USB 2.0 interface — Stainless steel housing d = 100 mm — Zero point adjustment — Data logger Optional features: — Calibration certificate according to DKD / DAkkS — Ex version Zone 0/1 — Calibration and testing case with extensive accessories...

... Measurement interval: 0.1 s – 50 min Accuracy of data logger: ±0.3 °C Battery type: Lithium, rechargeable NiMH, Alkaline-Manganese Thermocouples: Standard Type K, others possible, combination of different types possible Max. dwell time in the oven: 400 °C for 18 h / 1000 °C for 7.5 h...

...Full brass casting, with angled jaw tip for better clamping on the battery terminals with copper fabric tape as pole connection Insulation "Escorenen Ultra EVA" Colors red (+), black (-) or blue (-) Cable connection up to 50 mm², cable can be screwed with a ring eye M6 loadable up to 1000 amperes (according to testing specifications of DIN 72553) Length 170 mm Weight 0.390 kg...

...The Rod Microscope SM is a multifunctional testing instrument for applications where magnifying-glasses are not suitable any more. It is put directly on the specimen to be measured / inspected. Several configurations are available: with light transmissive base stand with battery lighting in the aluminium base stand with battery lighting and small base stand to measure hardness indentations Magnifications:25x to 100x Fields of view:9 mm to 1.7 mm...

...Load testing and capacity assessments of battery systems, including individual cell measurements.

...Certified and tested battery housings (optional with leak testing up to IP69k) specifically tailored to customer requirements. Custom-developed and manufacturing-optimized battery housings in terms of design, weight, volume, and stability ensure the safe protection of valuable components in accordance with the required IP protection class (up to IP69k).

... simulated. SEMKO is an independent testing institute and certification authority. As a customer, you can be assured that you are receiving a product that meets the highest quality standards. Therefore, Calix offers a 3-year warranty on all products. As a partner of the industry, Calix adheres to high quality standards such as Ford Q1, TS 16949:2009, and ISO 14001 for environmental management. Numerous leading automobile manufacturers such as Ford, Audi, VW, and Volvo count among the satisfied customers.

...For pulse acquisition from measuring devices such as electricity, water, heat, gas, or other output pulses, Mobile Data Logger For pulse acquisition from measuring devices such as electricity, water, heat, gas, or other output pulses Independent battery operation Minute-accurate registration and storage for up to 85 days Direct data transfer to a PC or via modem Including analysis program WINDIMAS Current software updates can be found in our download area.

... reed switch that can detect the presence of a magnet (e.g., to monitor the status of a door or maintenance hatch). The data is encrypted and securely transmitted to your smartphone or via a gateway to the essentim Cloud. - Battery-operated multi-sensor, particularly suitable for equipment monitoring down to -20°C or -30°C - Encrypted, secure, and wireless data transmission to your smartphone or 24/7 in connection with the scouter to the essentim Cloud...

...Modular stationary UV LED lights, mains and/or battery-operated UV LED handheld lights, compact UV LED flashlights - with many extras, certified upon request (Aerospace Airbus AITM 6-1001)...

...Horizontal and vertical use, dial rotatable by 270° Adjustment speed of the slider: max. 2m/sec • LCD digital display, digit height 6 mm • Data output: S_Connect Power: RS232 / USB combined with external power supply • SIS system Standard function Reversal of measurement direction, preset function, 2 references Scope of delivery: • Caliper • Battery CR2032 • User manual...

...The VeEX UX400 is the smallest multi-service transport test solution on the market. Its testing capabilities range from DS1/E1 to the latest high-speed 40G and 100GE network data rates, with battery operation and backup at all data rates. The modular architecture allows for up to six independent test modules and up to six simultaneous tests or combinations of tests. The platform's software...

...The Clavis measuring device acoustically measures the frequency of the vibrating belt using microphones. Measurement ranges: 30 Hz … 600 Hz (standard) and 10 Hz … 300 Hz Measurement accuracy: +/- 1% Suitable for toothed, wedge, or flat belts and all tension carrier variants (including steel, aramid, glass cord) Wide range of interchangeable sensor heads Integrated calibration facilities Battery-operated Includes steel tuning fork for quick sample frequency measurement Calibration certificate and carrying case included...

... Color change within a short time Personal long-term measurement for monitoring AGW (8 hours) and KZE values (15 minutes) Special Features Cost-effective analysis system No calibration required No laboratory analysis required Versatile carrying options Operates without battery/power supply Easy to use – no complicated training necessary...

... functionality. For the first time, in addition to the known features, a Service Life Measurement Device (SLM) for maintenance-free lead batteries has been integrated. This Service Life Monitor provides a reliable overview of the remaining service life of the lead battery and notifies the necessary replacement after the service life has expired via a light indicator and potential-free changeover contact.