air blowing Germany

...high blowing power at significantly reduced consumption of compressed air and lower noise development for every case of use the right passage ideal for blowing out punch parts Heat Resistance 90° C...

...If there is no water in the tank, the humidifier automatically shuts off, and a flashing signal indicates that it needs to be refilled with water. *Optional equipment B 250: Automatic water source, water monitor, safety pressure hose Summary of some technical details of the B 250: Max air flow: 500 m³/h Connection voltage: 230 V/50 Hz Power consumption: 0.050 kW Approximate evaporation capacity: 28.8 L / 24 h (for 23 °C / 24 % RH) Blowing levels: 2 Application in spaces up to approx.: 450 m³ Applications: air Other features: compact...

... to achieve the desired material properties. With an intuitive user interface and a robust design, the air-cooled blown film systems are easy to operate and maintain. They offer high flexibility in production and can be easily adapted to different production requirements. The systems are energy-efficient and help reduce operating costs while simultaneously increasing productivity. Customers benefit from the extensive experience and technical expertise of KUHNE Group, which assists them in achieving their production goals.

...°C, coil in protection class IP 54 • Connection cable 3 m long • Optionally available with 24 V AC voltage Air guidance • Blowing out on both sides or one side • Different air guidance variants available Item number: 090074 Performance Q0 (t0 = -10°C, DT1 = 15K): 425 W Performance Q0 (t0 = -8°C, DT1 = 8K): 180 W Surface: 2.25 m2 Air flow: 75 m3/h Fans: 1 piece Dimensions H x W: 325 x 426 mm Pipe content: 0.38 cdm3 Weight: 3.20 kg...

... — 200:1 optics for models 1M and 2M — Integrated linear laser — Ethernet TCP/IP communication — Brushless motor with an average lifespan of 40,000 hours — Air blowing at the front and water cooling The DataTemp DP software allows for the subdivision of thermograms recorded by the MP150 scanner into sectors or zones. The temperatures of these zones can then be analyzed using a wide range of...

...The test ink arcospray 38 is a test liquid with a surface tension of 38 mN/m. It was developed to quickly determine whether the surface is grease-free, as it can be assumed that grease-free conditions exist from this value. arcospray 38 can be completely cleaned off after application using blowing air (compressed air). Tested parts can be reused. Not only large areas, but also very small areas, such as chain links, can be easily and quickly assessed using arcospray 38.

... surfaces get not damaged. The blasting process is suitable for the removal of all solid, exposed residues, especially on metallic surfaces of production tools and high-quality machine parts. Blasting granulate and blasting pressure are adapted to the respective application. With the pressure blasting process you can clean extruder and injection moulding screws, blowing heads, moulds and profile tools much faster and more gently than with conventional cleaning methods. In extensive tests with your own workpieces you can convince yourself of the economic efficiency of our system.

... then removes excess cleaning agents from the workpieces. Ideally, the washing station is useful for heavily oiled workpieces as well as for scratch-sensitive parts. The advantage for easy blowing off of the parts is that oil mist formation is prevented and thus the health of the operator is not endangered. In addition, the working environment remains free of oil. height:88,90 cm Length:61,59 cm Depth:61,59 cm...

... effective A.B.S. discharge aids, precisely tailored to the properties of the stored goods: Fluid-Ex® With the help of Fluid-Ex®, the air that escapes during storage is reintroduced in a targeted manner, making the bulk material flowable again. Walk-Ex® By periodically blowing in and sucking out air in the air retention cone, it is set in motion. This compresses bulk material bridges and allows for free outflow of the bulk materials. Pneum-Ex® The cone is continuously shaped by several air cushions arranged within the cone...

...Control Cabinet and Enclosure Ventilation Air performance free blowing: 250 / 290 m³/h Air performance with outlet filter: 205 / 230 m³/h Mounting cutout: 223 x 223 mm External dimensions: 250 x 250 mm Installation depth: 120 mm Filter mat: P15/350S Delivery complete with filter mat and seal Suitable outlet filter: GV 400/500 Various filter mats for dust filtration Mounting cutout as LV 400/500 Low installation depth Conversion blowing/suction possible Also available in EMC version Special colors available on request Ready for shipment: in approx. 3-4 days Item No.: 10 413 150...

...Safe blowing off of dust particles on work clothes by means of controlled compressed air in 30 seconds...

...The cleaning box significantly improves the air circulation at the workplace. Parts to be cleaned are blown out in a closed space. This way, the machine environment, such as measuring devices and workpieces, remains clean. YOUR ADVANTAGES WITH JC PRODUCTS ✔ Made in "Franken" ✔ Innovations for your product to be cleaned ✔ Sophisticated designs ✔ Everything from a single source ✔ A fair price-performance ratio...

...125 kW Air flow: 7300 m³/h Temperature increase: 50 K Oil consumption: 11.8 kg/h Electrical connection: 230/50/6.1 V/Hz/A Power absorbed: 1.38 kW Exhaust pipe: Ø 180 mm Blowing connection: Ø 550 mm Sound pressure level: 75 dB(A)...

...The AIR CHIPPER are compact, lightweight and economical tools to have on hand for all kinds of chipping work. Easy chisel replacement is made to excellent operation. The straight design is suitable for operation at narrow and deep places. In addition, the ACH16 has many feature on the followings..... Idle running proof structure adopted. No blowing 　　 　 without touching the work piece by the...

... workpieces and tools. Weight: without suction housing: approx. 9 kg/m; with suction housing: approx. 12 kg/m Air pressure: 5…10 bar, dry, oil-free, filtered Nozzle rotation speed regulated nozzle: approx. 600 min⁻¹ Operating ambient temperature: 0…+80 °C (+32…+176 °F) Product features: Also available as a blow gun, Variable connections, Two different nozzle arrangements Operating ambient temperature: 0...+80°C (+32...+176°F) with blowing air; 0...+60°C (+32...+140°F) without blowing air Storage temperature: 0…+80 °C (+32…+176 °F) Ambient humidity: max. 70% r.H., non-condensing...

...Applications include, among others: • Coarse filters in liquid filtration • Pre- and supply air filters under extremely harsh operating conditions The TH-600 natural mixed fiber filter is made from latex-bound natural mixed fibers and is characterized by high dimensional stability in the fiber composite. It can often be reused by rinsing, vacuuming, or blowing out with compressed air. The TH...

... consumption. The air volume directed across the width shows a remarkable amplification rate of 20 to 25 times compared to the use of compressed air lines and compressed air blowing systems. Air amplification systems with conventional blowing holes only show a 4-fold increase in airflow, meaning only 1/5 of the capacity of the cold air curtain. A cold air curtain can be formed with device widths ranging from 150 mm to 900 mm. A typical application could be a cold air curtain between workers and heat, steam, or smoke. Likewise, the...

...In our facility, there is the possibility to twist yarns up to a 6-ply using air.

...blowing off chips, or enriching oxygen. PRODUCT Oil-free Low Pressure Turbo Compressor, directly coupled ADVANTAGES Drastically reduced operating costs Highest purity class Intuitive operation Low sound pressure level Superior drive...

...Main Features: ○ Suitable for processing various thermoplastics, such as PP, PA, PET, PLA, etc. ○ Uninterrupted transport through melt guiding channels, no disassembly required for cleaning. Facilitated material change. ○ Option to equip with additional draw rolls (for multiple stretching). ○ Cooling air temperature adjustable from 15 to 25℃. ○ Adjustable blowing height of the cooling fan...

...To meet the various requirements for drying results, different drying methods are possible depending on the cleaning item. In combination with the available cycle time, the integration of external dryers is advisable: recirculating air drying, hot air drying, compressed air impulse blowing systems, vacuum drying, heating systems, and heat tunnels.

...The fan and cooling specialist SEPA EUROPE unveils a true innovation this year: The RaAxial fan. This created term is a combination of the words radial and axial. The microfan with its dimensions of 17x17x4.5mm is ideal for compact, embedded applications and offers numerous possibilities, e.g. as an axial fan for the ventilation of housings or as a radial fan for blowing air onto the heat sink. A...

... - through a heated drying tunnel. The temperature and conveyor belt speed are adjustable. As optional equipment, you will receive a high-pressure air curtain that removes remaining water by blowing the parts before drying, as well as an extension of the conveyor belt to facilitate loading and unloading. Technology: hot air Function: continuous drying Applications: for the industry...

...In various applications, it is undesirable for a liquid, unfiltered suspension to remain in the core after filtration, which exits when the press is opened. For this case, JKF offers a simple system using compressed air. The liquid suspension is returned to the feed tank via the inlet. If the medium is particularly pasty, especially with membrane plates, or if there is a risk of clogging the core bore, a core flushing can be performed. In this process, water is used to flush the bore free and is then returned to the feed tank.

...The DP 106 discharge gun in the KERSTEN neXt® product family is ideally suited for manual discharge of substrates and to blow off dirt. It features a bundled circular air discharge. The flow-optimised and low noise blowing nozzle allows all materials to be discharged optimally and with high efficiency, even at low pressure. Cerificate:TÜV / GS / NRTL Production:Germany IP Class:IP 54 Material:Plastic...

...Cylindrical dryers are suitable for stain-free drying of parts of all types. Thanks to the use of hot air blowing, uniform drying of the parts and the drying granulate is ensured. RT 200:67689 RT 400:68015 RT 600:67879 RT 800:67374...

... hose blowing device or compressor 1,300 l/min for blowing out joints and cracks - Edge spraying device with 3 nozzles electrically heated for edge sealing or electrically heated pouring hose system available as an option - Tandem axle chassis with height-adjustable towing device - Innovative self-propulsion with hydraulically driven heavy-duty axle and steering wheel, climbing ability up to 15%, hydraulically lowerable, no overload of a tandem axle in construction site operation...

...2.300 m³/h ventilation unit, five-speed adjustable with a pressure of up to 200 Pa. Particularly suitable for cooling server rooms, event climate control, and machine cooling. Also applicable for heating warehouses, construction heating, etc., in conjunction with a mobile heating center or an existing CHP system. The COOLAIR MLG 25 is mobile on wheels and fits through any standard door. Air distribution via flexible air hose 1 x 500 mm or four-sided free blowing using a blowing head. Extensive optional accessories are available.

...KTW SmartValve technology: Energy and performance-optimized blowing / drying with compressed air Compressed air application...

...Fundamental elements of spray drying: - Atomization of a liquid - Providing a hot gas stream through an air heater, combustion process, or heat recovery. - Design of the reaction chamber regarding residence time - Discharge of solid particles - Blowing to generate the required gas flow Generation of particles with defined size and surface atomization techniques: - Single-stage nozzles - Two...