valve installation Germany

...2-way, 3-way, and 4-way single valve housings for the installation of screw-in valves. Available in various sizes made of aluminum and steel, with different connection threads.

...High flow Robust construction Reliable sealing Easy installation High-quality material Technical specifications: FSA motor ball valve body brass 3/4" 3-way PN 20 Bore diameter: 13.0 mm Temperature: -30° to 120° C Thread: G-thread Pressure: 10.0 bar Kv value / Cv value: 6.78 / 7.91 Weight: 368 g Seal: EPDM...

... highest level. All JOBE valves are made of high-quality ABS or nylon plastics and are always complete with float. The ROJO and TOPAZ series are also available in a COMPACT version (C), which is used when space for installation is limited, as the weighted narrow float has a very compact design. Material:ABS, Nylon Seal:LOPE, EPDM, Urethane Max. Temperature:60°C...

...Valves and shut-off devices are elements that allow for the closure and control of liquids or gases. Our product range includes 2-way and 3-way ball valves, hydraulic ball valves, inclined seat valves, butterfly valves, as well as solenoid valves, pressure switches, stop valves, needle valves, and valve cocks. Coaxial valves and check valves are also part of our range, along with strainers, safety valves, and relief valves.

...Solenoid valves for direct mounting on the pneumatic actuator or cylinder. Cylinder and valve become a compact unit thanks to simple installation in the air connection. Available in sizes 1/8 and 1/4 and with all common solenoid voltages. With manual override.

...Wide-neck containers with an extremely wide filling opening (88 mm) that are ideal for interior cleaning, which is very important when storing delicate substances. The carrying handle and screw cap ensure safe and comfortable transport. The wide-neck container is also optimal for use as a laboratory container. A threaded connection near the bottom allows for the installation of a shut-off valve or any other accessory with a 3/4" internal thread. Material: Transparent HDPE UV stabilized: Yes...

... installation locations for valves and system components whose size allows them to be housed in a shaft Are excellently suitable as inspection shafts with flushing connection, as feeding points for AWAaerob ventilation systems, for ventilation and bleeding valves, for pig traps etc. Are made of high-quality, durable and waterproof materials with a high material strength and low material weight, with the design permitting short installation times and excluding complex Housing:fibreglass plastic (GRP)...

... explosive liquids. * Mixing and pumping integrated in one system * stufenlose Regelung der Folgeplatte über Steuerventil * Media examples: Paints and varnishes, emulsions, dispersions, suspensions, water/oil mixtures, liquids with increased viscosity and solids content Features & Advantages * Quick installation and time saving through easy handling * Compact design * Base plate offers good stability on the container lid * Easy to insert into the 2" bunghole of the container by balancer or overhead crane * No further mixer necessary...

...• Small required space • Integration in injection molding machines, especially for in-mold-decoration • Easy installation on robots, linear axle and brackets • Separate 24V control of compressed air and CO2 • Liquid CO2 supply with CO2 cylinder bundles including dip tube or CO2 tanks • Short response time due to additional CO2 valve on the nozzle • Automated cleaning of injection molds, metal and plastic parts...

... cross-section, e.g., in robotic applications - Prevention of cavitation in products with high flow limits Optional components: - High-pressure ball valve for... Connections for inlet and outlet: each IG R 3 / 4 Installation length: 120 mm Weight: approx. 1.5 kg Max. permissible product overpressure: 8 bar Buffer volume: 25 ml Permissible air pressure: 2 - 7 bar...

...Miniature Check Valve As a screw-in valve made of stainless steel for M6 threads. – Individually positionable – Simple mounting hole – Space-saving installation – Suitable for hydraulics and pneumatics – Disassemblable and reusable – Suitable for various media...

...-return valve preventing backflow when switched off. With its powerful and maintenance-free 400 Watt motor, the clear water submersible pump TWP 4005 E transports clear or slightly dirty water with particles up to 5 millimeters in size. The submersible pump quickly dries out flooded basements and laundry rooms, empties swimming pools in no time, and also performs well as a standard clear water pump when transferring full cisterns or rain barrels. Medium: for clear water Operation: electric Suction: self-priming, submersible Installation: mobile Other features: compact...

...Compact valve blocks that reduce the effort for pipe installation help shorten maintenance times and minimize investment costs. One well-known application of hydraulics with a connection system tailored to the application allows for the logical concentration of multiple process valves into a single block according to customer specifications. All necessary connections between the process valves are integrated within the manifold block. Size::DN 15 - DN 50 Pressure::PN 40 Material::Stainless Steel 1.4571 / 1.4404 / 1.4301 / 1.4305; Ductile Iron (EN-GJS-400-15)...

...The short stroke lift is ideal for accessing two fixed transport levels. By using a rodless pneumatic cylinder, a low installation height is possible. The speed of the lifting/lowering movement can be adjusted via a throttle valve and is a maximum of 0.5 m/s. Technical Data Short Stroke Lift KHL-2045 • Accessing two transport heights • Pneumatic lifting and lowering • Stroke 200 to 800 mm • Load capacity up to 100 kg • Rodless cylinder...

... distances. For highly viscous materials, a flush-mounted membrane M12 x 1 is available, which eliminates any disruptive dead volume. To measure ambient pressure (relative measurement), there is a small opening protected on the back of the sensor. In the absolute measurement option, the applied pressure is measured against an enclosed vacuum. For electrical connection, a valve connector DIN...

...Telescopic installation set for civil engineering / road construction / pipeline construction. Infinitely adjustable, with square key bar, dome sleeve, pull-out guard, cap, protective tube and stepped bell with dirt-tight fit. Poles and castings completely galvanized. Art.-No. 243150 cover depth:0,75 - 1,00m Art.-No. 243105 cover depth:1,00 - 1,50m Art.-No. 243167 cover depth:1,30 - 1,80m...

...The technology in the FMX series stands for higher flow rates compared to other valves. Or are you looking for compactness? Our FMX valves occupy just a small installation space, while offering the same speed and quality.

...For driverless vehicles, the test operation requires additional safety in the form of redundancy for brake activation. Our emergency brake actuator offers a safe option with the highest reliability. As soon as a communication failure occurs, the pneumatic cylinder is activated via a normally closed valve from a monitored pressure reservoir. The brake pedal is thus pressed, and the vehicle is decelerated using ABS braking. The installation takes less than 3 minutes and requires no modifications to the vehicle. It also does not interfere with manual vehicle operation by the driver when installed.

... of the saw frame with a quick-release lever — Feed adjustment via a hydraulic flow control valve — Automatic adjustment of the saw frame position above the material to be cut — Frequency-controlled band saw drive (partially optional) — Exact cutting path Type: fixed installation Technology: band, miter Processed material: for steel, for plastic Application: for profiles, for pipes Additional features: automatic, horizontal, precision Additional features: with hydraulic vice...

... is done using a compressed air pulse via solenoid valves. This method of cleaning is very economical, as it is demand-dependent based on differential pressure measurement. The installation and removal of the filter bags are carried out without tools from a mounting platform. Systems that operate in frost-prone areas are equipped with valve heating and an additional cover for the solenoid valves. The required piping layout is designed individually. Hellmich exclusively uses branded components for electronic or electrical assemblies...

...All information at a glance: "Electric Pump Cematic 55 (230V, approx. 50 l/min)" Suitable for all sizes of DWT, for installation indoors or under a roof Suction hose 1.9 m with foot valve Automatic dispensing nozzle 4 m filling hose DN 19 Weight in kg: 15 Further links to "Electric Pump Cematic 55 (230V, approx. 50 l/min)" Questions about the item?

...Valve Technology Force range max. 100 N Stroke 20 mm Universal and tailor made: ACE industrial gas push type springs of the NEWTONLINE family offer perfect support of muscle power with forces from 10 to 13,000 N with body diameter of 8 to 70 mm. With their high quality features the NEWTONLINE gas springs form the industry standard. These durable and sealed systems are ready for installation...

...Pressing of valves and pumps, protective cabin, valve test bench, pressure tests - We design and manufacture individual test systems for the pressure testing of valves and pumps. Merecs Engineering has a competent network of partners for this purpose. Within this framework, we carry out the risk assessment, design, manufacturing, installation and commissioning. In addition, we connect the systems to the individual IT infrastructures (databases, ERP systems, MS PowerBI) of our customers.

...Field-wireable connectors are available in sizes M8 × 1/Ø 8 mm, M12 × 1, 1/2", 7/8", M16 × 0.75, M23 × 1 and also as valve plug. The connectors make installation easier in applications in which it is difficult to estimate the needed cable length.

... if necessary, but ceramic valve discs are also part of our product range. Various construction forms and geometries are possible. Whether as a cross or T-piece, with coupled valve discs or individually driven, we adapt to the installation situation and work closely with the customer during the design phase to find the optimal solution for each application case. We also manufacture components based on our customers' drawings. This includes, among other things, control cones or hoppers.

... pair of clamping jaws, 1 recovery bowl, 1 MSU assembly key and 1 MSZ, maintenance booklet and spare parts list Features • Hydraulic head made of aluminum, cylinder surface with wear-resistant treatment • Pneumatic cylinder made of cast aluminum • Thanks to the hardened and chrome-plated steel piston, the device operates effortlessly and is wear-resistant • Long service life, due to compact wear-resistant seals with high scraping effect • Quick-release valve for fast return and high productivity • Adjustable hydraulic head at 360° Material: Aluminum, Steel...

... adjustment of the flow rate, the VA flowmeter features a needle valve. The equipment has approvals for use in hazardous areas. Fluid::for liquid Technology::variable area Other features::with glass tube; in measuring tube Process temperatures::-5°C to +100°C Operating pressure::up to 10 bar Upper measurement limit for liquids::0.4 to 160 l/h (water: 20°C) Upper measurement limit for gases::from 5 to 5,000 l/h (air: 20°C, 1.013 bar)...

...for the sanitary and heating sector The check valve with threaded socket connection. Thanks to its closing spring, the installation position is flexible. http://www.gestra.de/produkte/armaturen/a2-rueckflussverhinderer/fuer-den-sanitaer-und-heizungsbereich/muffenrueckschlagventil-mb.html...

...Shut-off valves available in various forms ASR: A metallic sealing valve, fully welded housing filled with oil, available up to pressure level PN 100. ASR-W: A valve in soft-sealing design, fully welded, available up to pressure level PN 25. KSR: Robust wedge valve in fully welded design for blowing out gas pipelines, available up to pressure level PN 100. DSR: Robust rotary valve type DSR in fully welded design. Dust-resistant shut-off device for installation in gas pipelines or for blowing out in street caps.

...{"Switching Function":"3/2 Ways","Sealing of the Pneumatic Interface":"Form seal (GKR), encapsulated exhaust","Installation Position":"Any (preferably anchor orientation vertical)","Medium Quality according to ISO 8573-1":"Compressed air of quality class 4, 3, 4","De-energized State":"NC (normally closed), NO (normally open)","Seal Material":"FKM (other seal materials available upon request)","Valve Housing":"Plastic","Ambient Temperature":"-10 °C to +50 °C"}...