throttle valve Germany

...Throttle Valve...

For over 70 years, we have been producing and supplying shut-off valves, throttle valves, and control valves made from various materials and sizes, primarily for industrial applications as well as for building technology and the automotive sector. We use readily available components that can be quickly assembled and equipped with the desired drive systems. We are committed to solving your system c...

...Throttle valves and throttle check valves made of aluminum in block form in sizes M5 to ½. Individual control characteristics are available on request.

...Throttle Valve - Flaps and Nozzles...

...KTA, AVS D 100/50, EDF/Areva/RCC-M Shipbuilding/Boatbuilding: ABS, ClassNK, BV, LR, DNV/GL Examples - Drain Valve/Outlet Valve - Bracket, Holder, Pendulum - Throttle/Throttle Plate - Pressure Vessel - Nozzles/Nozzle Heads - Filter Pot - Flange Socket - Flanges/Container Flanges/Pipe Flanges - Fitting, Forged Fitting - Fork Tube/Pipe Fork, Forged - Caps/Pipe Cap/End Cap/ - Boiler Construction...

Sound attenuators, ceiling air outlets, floor outlets, ventilation grilles, slot outlets, source outlets, volume flow controllers, Fan Coils, fire protection dampers, shutter dampers, particulate filter boxes, bypass grilles, weather protection grilles, air-water systems, bus systems, living space ventilation, chilled ceiling systems, acoustic modules, telephone soundproofing boxes, displacement o...

...Application: Motor Management Electronic pedal sensor modules comprise of an accelerator pedal, angle sensor, and mechanics for simulating the driver's traditional sense of the accelerator pedal. When the accelerator pedal is pressed down, the pedal sensor transmits information to the control electronics. Based on this information, the position of the throttle valve is calculated. Automotive-Applications.pdf For more information please contact: automotive@novotechnik.de, +49 711 4489-222...

...Short design (exhaust-side throttle) - Adjusting screw with knurl - Whitworth pipe thread - VS seal rings - Material: brass nickel-plated, Al black anodized, KST - Type: Cone-type throttle - Allowable medium: Air - Temperature range 14 to 158 °F (-10 to +70 °C) - Working pressure range 7 to 145 psi (0.5 to 10 bar) Attachment:Swivel Connector Material:brass nickel-plated,Al black anodized Characteristics:Throttle function Other characteristics:Throttle check valve Application:Pneumatics...

...size 2, clamping direction G with throttle valve without switch rod with long clamping lever max. 70 bar, as per data sheet B1.8268...

...the check ball (compression) is pressed into its seat. As soon as the piston head moves, oil is pushed through the throttle hole(s) located in the shock absorber tube, generating the required damping force. After the oil has passed through the throttle hole, a portion of the oil flows through the extension check valve and fills the rod side end of the shock absorber tube. The remainder of the oil displaced by the piston rod compresses the compensating sponge. After the oil brake has extended, the check ball (extended) is pressed into its seat. As soon as...

... valve is closed again. For better control of the filling process, the bottles are illuminated with an LED lamp. With the Fillboy, glass bottles (ranging from 0.25l to 1l), siphons, and kegs (5l) can be filled. PET bottles are also available upon request. The filling speed can be continuously adjusted from 0.5 to 2l/min via a throttle. Approximately 80 bottles of 0.5l can be filled per hour.

...Waste oil collection/extractor-75 l Venturi-mobile specification Compressed air is pumped into the container via the Venturi block a vacuum is created Manometer/vacuum meter for displaying pressure and negative pressure Oil is extracted via the dipstick opening Level indicator Safety pressure relief valve permanently set to 0.5 bar, with throttle valve Plug nipple for Rectus coupling, type 26, NW...

... scale (2) • Throttle plate: Automatic throttle for even faster and protective setting as from M3 blind rivet nuts • PTFE (Teflon®) seal. PTFE seal and optimised pilot holes improve the service life of the slide valve Working range Sets blind rivet nuts from M3 to M10 in all materials as well as M12 in aluminium and steel. Technical data Weight: 2.4 kg Adjustable stroke,max: 10mm Adjustable traction force, max: 22 kN at 6 bar Operating air pressure: 5-7 bar Air hose connection: 6 mm Ø (1/4’’) Air consumption: approx. 2 to 4 ltr. perrivet nut Material:Aluminium, steel, plastic...

...Decompression Valve Article Number: 30-0692 Thread: M10x1 Closing Force: 6 ± 1N Construction Height: 36mm Throttle Hole: 1.0mm Housing Material: Zinc-Plated Steel...

...Clamp valve with stainless steel body for stopping normal and aggressive fluids, for mounting on valve blocks. Size: DN10, DN15, DN20, DN32 Pressure: PN 40 Materials: Stainless steel 1.4408...

...The throttle valves DIN 42560 Form A and A OR for transformers are designed as pre-weld flanges and are directly welded into the transformer tank wall. The radiator is flanged to the four holes (M 16; bolt circle Ø160 mm). The flange is made of forged steel S355J2G3.

...ERC Throttle/Butterfly Valve Cleaning Spray breaks down stubborn impurities in the carburettor system and prevents major repairs. THE EFFECT Deposits and impurities in the intake and throttle valve area impair the function of the carburettor system and increase the risk of corrosion and expensive repairs. THE ADVANTAGES AT A GLANCE - Removes soiling in the intake and throttle valve area - Cleans grease, dirt, and oil residue, as well as rubber abrasion off of metal surfaces - Can be used on (carburettor) linkages, cable wire passages and metal bearings ...

...Throttle valve type FINJA Use: The FINJA flange valve was designed for use in PN and ANSI applications. It is the „big sister“ to our RIA wafer valve, and is in every way equal to the RIA in terms of durability, robustness and safety. Owing to its customized combination of materials and its configuration, FINJA is able to reliably satisfy your every requirement. Like all our valves, we can “automate” FINJA using any drive system commonly available on the market, together with suitable accessories.

...13.0 ISO Flange 13.1 Locking Hand Lever 13.2 Worm Gear 13.3 Swivel Drive 13.4 Swivel Drive MVEN Solenoid Valve, Limit Switch 13.5 Electric Drive • Flange Throttle Valve Type BKLK 13.0 – 13.5 • Flange connection according to DIN 24154, Series 2 and 4, other flange connections available upon request • Length according to factory standard or customized, temperature up to 1100° C • Drive selection...

...The load-holding valve type LHT is suitable for applications with low vibration tendencies. Shock valves and changeover valves can be installed with or without throttle check valves.

...The CORS is a screw-in hydraulic control 3/2-way valve with a throttle. Depending on which side has the higher pressure, the flow rate has free passage.

...Gas and air throttle valves for regulating volume flows. Available for manual adjustment or for mounting on control drives. Nominal diameters DN 40/25 to DN150 (aluminum valves) or DN 50 to DN 600 (stainless steel valves up to 450°C medium temperature). APPLICATION • Usable as actuators for air • Smooth adjustment, thus low effort required for electric actuators • Intermediate body for flanges...

... mechanical throttle opening. As a result of this relaxation (pressure reduction) at the outlet, a liquid-vapor mixture is present behind the high-pressure float regulator, which is directed to the separator. Generally, a high-pressure collection vessel can be omitted. By continuously relaxing the refrigerant, pressure fluctuations are avoided, and the amount of flash gas is reduced. This decreases the electrical power consumption of the compressor. This saves up to 13% energy.

... pressure: up to 350 bar / 5000 PSI Throttle Valves for Manifold Mounting DVP ▪ Throttle and shut-off the flow of liquid media in both directions ▪ Designed for manifold mounting with either 4 or 6 mounting holes ▪ Graduated turning knob and coded spindle to accurately control flow ▪ Set-screw located on side of turning knob to lock valve in position ▪ Panel mounting nuts available on request ▪ Maximum working pressure: up to 350 bar / 5000 PSI Throttle Valves for Cartridge Assembly DVE ▪ Throttle and shut-off the flow of liquid media in both directions ▪ Designed for direct installation into...

...Robust frames with sleeves and tipping device - Secured against unintentional slipping - Protection of the mesh box by mandrel - Lid secured by steel cable in open position - Forward and backward tipping - Tipping speed adjustable via throttle valve - Device for securing hydraulic hoses, steel cables, and safety chain - Surface: galvanized Versions - Type KG-A, Tipping controlled by forklift via hydraulic circuit - Type KG-B, Manual tipping and hydraulic tipping device with brake - Type KG-C, Manual tipping...

... the wire feeder — Drive 4X Steel D200: Standard with gas control valve for adjusting gas flow directly on the wire feeder — Factory option: Additional gas valve for double safety — Continuously adjustable arc dynamics (throttle effect) — Adjustable start and end crater functions — Synergic or manual welding operation...

...The short stroke lift is ideal for accessing two fixed transport levels. By using a rodless pneumatic cylinder, a low installation height is possible. The speed of the lifting/lowering movement can be adjusted via a throttle valve and is a maximum of 0.5 m/s. Technical Data Short Stroke Lift KHL-2045 • Accessing two transport heights • Pneumatic lifting and lowering • Stroke 200 to 800 mm • Load capacity up to 100 kg • Rodless cylinder...

...Manufacturer: Kemper GmbH Factory No.: 64300 Basic version IFA certified (Class W3) for applications with low smoke/dust generation and occasional use, also suitable for Chom nickel steel Separation efficiency > 99 % Filter monitoring with three-stage filter (disposable filter) Extraction hood rotatable by 360° Extraction hood with throttle valve Extraction arm Ø 150 mm Item number: 1203730440...

... to ensure a consistent feed and regulate speed. An axial external force is applied to the piston rod, causing oil to flow through a throttle valve from one chamber to another. The nearly constant volume flow of the oil absorbs and neutralizes the speed fluctuations of the pneumatic cylinder under varying load conditions.

...-control of the rotary actuator - Silencers, throttle silencers, and throttle plates for sound reduction and throttling of opening and closing times - Limit switch boxes in a wide variety for position feedback to the control system - Pneumatic and electropneumatic position transmitters for continuous control and feedback of the rotary angle - Hose fittings of all kinds...