threaded fasteners Germany

...Fasteners, threaded bolts with hooks and eyes in various designs: with closed eye, with open hook, with spiral hook, counter hook, twisted, and band hooks.

...Material: Thread insert made of steel or stainless steel. Execution: Passivated. Note: Thread inserts allow for the reuse or repair of damaged, stripped, and seized threaded holes. This also enables the recovery of high-quality products from scrap. Thread inserts are suitable for use in various materials, including lightweight metals and cast parts. Inserts with internal threads larger than...

... head screws, square head bolts, fit-bolts, hexagon head bolts, hexagon socket head cap screws, wheel bolts, bearing bolts, threaded bolts, clevis pins with head and many more which can be tailored to customer specifications according to the model or drawing and many more which can be tailored to customer specifications according to the model or drawing.

...Press-fit threaded bolts (blind rivet screws) are fasteners that feature a knurling under the head, which compresses the material into the rivet ring when inserted into the sheet metal, securing the fastening element. Advantages: • high resistance to torque loads • no damage to coated surfaces – ideally suited for sheet metal • always perpendicular to the sheet • head flush with the sheet after installation Material 1: Steel Material 2: Stainless Steel A2...

...The American form is the cost-effective alternative to standardized DIN screws. A threaded pin is pressed into the cold-pressed wing nut. This form is predominantly used in end products that are sold solely based on price. Available from M3x6 – M12x60 from stock On request: Special lengths and custom thread ends With a collar below the wing head, also available without a collar upon request...

...Adjustable, reinforced, plastic, threaded steel blackened PLACOGRIP® clamping lever in a sleek design Clamping lever of convincing quality for particularly high demands GRIP LEVER Reinforced polyamide with injected locking teeth made of zinc die-cast Black RAL 9005 and Orange RAL 2004 Other RAL or special colors available upon request THREAD INSERT Steel blackened...

... threads is not an issue, as the helical ribs are designed so that the direction of the installation torque tends to push the insert deeper into the hole - which, of course, is not possible - when the threaded joint is tightened. A pilot that is slightly smaller than the hole and of sufficient length is designed to ensure a straight insertion into the hole. Press-in inserts allow for quick installation without specialized equipment and ensure good overall performance of the joint.

...Innovative cold forming technology, produced in a single operation, ready to use. Application areas: Automotive, gardening tools, outdoor furniture, furniture. Our engineering team supports you in part development and prototyping to meet your functional and quality requirements. + Product variants: threaded bushings, threaded inserts, insert parts, setting nuts, press nuts, insert nuts, press fasteners, insert, knurled inserts, knurling, knurled insert, threaded insert, press nut, press-in nut, or insert nut. + Application in the following material environments: metal, aluminum, plastic, wood.

...Features • A single solution for everything: Building authority approval for cracked & uncracked concrete, perforated and solid masonry and additional reinforcement connections • LEED and emission tested: for ecological and healthy living • Usual threaded rods* can be used • Earthquake tested C1 • Processing even possible at extremely low temperatures (down to -10° C) • Can be used in wet...

At FATH, we specialize in the development and manufacturing of mechanical engineering components, parts, and modular solutions that are used in industrial environments wherever people, machines, and materials interact - whether in production, assembly, intralogistics, or logistics. Our process optimization solutions ensure efficient shop floor management and increase productivity. We combine know...

...At alstertaler schrauben & präzisionsteile, you will find petro-chemical fasteners in various designs and made from a wide range of materials, including Studbolts with metric fine threads according to DIN 976, as well as bolt-nut combinations with UN threads. Learn more on this page about the extensive range of petro-chemical fasteners from alstertaler. We are your strong partner for threaded bolts according to petro-chemical standards as well as for proven CNC turned parts, CNC milled parts, and bent parts.

...Linster offers you a comprehensive range of fasteners according to DIN, EN, and ASTM standards. You have a selection of various accessories.

...Spiral hoses allow for the retrofitting of cables, wires, and hoses. Cables can be easily threaded and branched off at any position. Temperature: -50°C to +90°C Designation: Spiral hose made of polyethylene Dimensions: Cable bundle 13-80mm...

...polyKOM is a standard container made of weather-resistant polyester. It is suitable for any type of electronic or electrical internal components. External hinge. External hinges and fasteners are also available for supply. Compatibility with commonly available commercial models is an additional advantage of polyKOM. Several threaded bushings are already integrated at the bottom for the...

...ARA-T reliably supplies you with screws, nuts, washers, threaded pins, and threaded rods according to DIN, ISO, and custom specifications. If desired, the color of the fasteners can be changed, for example, through anodizing. Of course, we also deliver all described products in other materials, such as stainless steel or nickel/cobalt alloys (e.g., 2.4605 or 2.4105 or 2.0853, etc.), as well as tantalum, molybdenum, or other sintered alloys.

...Item No.: 685226 Strap Specification Strap Strap threaded into injection-moulded fasteners, ends with multilayer stitching Model type: C (Customised) Dimension: approx. 60.0 mm wide Material: Polyester Colour: black Property: elastic Elastic Material: Natural rubber Packaging: packed in cardboard box...

...The transducer is suited for the most varied measurement duties on threaded fasteners, to check and adjust assembly tools, like screwdrivers and spanners, and to sense loosening torques, etc. It can also be deployed in blocked mode to test torque wrenches. The device is powered wirelessly and the electrical output is wireless, as well. Hence, there is practically no wear on the device. This...

...Discover our threaded bolts, double-ended bolts, and threaded rods, with or without drive, in sizes M5 to M27. We also provide various surfaces and strengths according to your specifications. Our products, made from steel and stainless steel, are used in the automotive, truck, trailer, and industrial sectors. For further inquiries, please feel free to contact us.

...As a specialist for special parts, we are your competent partner for high-quality fasteners: made of any special materials according to drawing to specification / factory standard according to special standard (for example DIN 2510) according to technical regulations (eg AD-W2, AD-W7, AD-W10, TRD 106, etc.) with all acceptances and double approvals (for example, works certificate 2.1, works certificate 2.2, acceptance test certificate, 3.1, acceptance test certificate 3.2, TÜV, Germanischer Lloyd, etc.) ...

Good idea. Let’s make it! – we mean it exactly like that. As experts, we understand the framework conditions and assist in the development of new connection solutions. And as a manufacturer, we have unique capabilities to produce tailored customer solutions. Although RAMPA® has been around for more than 100 years, we are much more interested in the future and the associated possibilities and idea...

...The connection to the precast element is made via the building authority approved threaded sleeve FB-M. The MOSO® precast fastening FB-DZA is used for horizontal suction safety of facade panels. It is used in combination with the pressure screw FB-DS. Load stages: 2.0 - 6.0 kN Material: approved stainless steel Verification: static verification...

... flake coatings are just a few of the common finishes found on our products. The drive forms, including external and internal hexagon, cross and slotted, as well as internal and external six-lobe, ensure that our fasteners can be tightened with the required torque. Screws, nuts, washers, and locking elements, along with dowels, rivets, blind rivets, and threaded rods, represent just a small selection from our inventory.

...Fasteners for stones BSTP - Fasteners for fiber mats and boards: Fiberfix pin FF, threaded bolts DRS, DRT, etc., and the corresponding flange nuts, DIN nuts, washers and plates, clips - Fasteners for concrete: wave anchors CH, CV, TWM, CTP, etc. - Slotted pins and kettle pins SF, KS - Flat anchors YH, SY - Screw wave anchors VNCV - Special parts according to customer specifications - Anchor fins - Holding plates - Bolt holders, ceramic ring holders, base plates...

... tightened. Lock wire is available in a variety of gauges and materials, depending on the application. In racing applications, stainless steel wire is used, most commonly in 0.032" in (0.81mm) diameter. Typically, the wire is threaded through a hole drilled into a fastener or part, then twisted and anchored onto a second fastener or part, then twisted again...

...We maintain a well-stocked inventory of pipe clamps in many different designs. Heavy-duty clamps, pipe clamps with rubber inserts, round steel brackets, and much more. Available in black, galvanized, and stainless steel. In short, everything you need for fastening, such as threaded rods, brackets, and mounting rails.

...For over a decade, the PEM press-in technology has proven itself in our company. In 2001, we acquired a press machine for threaded bolts/threaded nuts and other PEM press-in fasteners. With the PEM press (pneumatic press), threaded bolts/threaded nuts are pressed into pre-drilled holes or blind holes using a die and counter-die under the pressure of several tons of force. This relatively new yet...

... coating). For example: Set screws, hex screws, tension screws, shafts, threaded rods, spacers, hollow screws, drain screws, fasteners, fittings, studs, adjustment screws, countersunk screws, knob screws, oil return screws, installation screws, stone screws, seal screws, motor screws, anchor screws.

...Hinges, double hinges, ISO blind nuts, folder rivets, extension discs for folder rivets, screw rivets, drift pins, pointed staples, blind rivets, screw blind rivets, panel fasteners, Tree-Lok pins, Tree-Lok sockets, hex nuts, threaded pieces, hex screws, hex caps, thread protection sleeves, decorative caps, vent plugs, glass pads, elastic buffers, universal buffers, felts, anti-slip pads, covers for drill holes, ball knobs, protective corners, threaded plugs, adjustable gliders.

... economical disassembly. The fischer scaffolding eye GS, together with the fischer expansion anchor S 14 ROE or the long-shank anchor S 16 H R, is the ideal fastening solution for scaffolding in most building materials. The fischer scaffolding eye FI G can be installed with internal thread anchors from fischer, while the fischer ring nut RI is mounted with threaded bolts and rods. The fischer eye screw is perfect for securing chains, ropes, trellis systems, or clotheslines.

...Fasteners DIN 933 / DIN 934 / DIN 125 / DIN 9021 / DIN 7991 / DIN 912, ASTM GR2, screws, nuts, and U-washers from M3 - M16, threaded rods from M4 - M16. Other dimensions available upon request. Fasteners DIN 933 / DIN 934 / DIN 125 / DIN 9021 / DIN 7991 / DIN 912 GR5 Most dimensions available upon request.