Results for

Thermally moulded plastic parts - Germany

21 Companies

2 Products

FRANZ FISCHLER GMBH & CO. KG

Germany

For more than 50 years, plastic moulded parts and abrasives have been at the forefront of our company. In the course of this, maximum precision and a highly innovative spirit have come to distinguish our individual solutions and leading products. Our guiding principle is to put the customer at the centre of our business. Your satisfaction alone is the basis of our success. For the long term, across all products and services, our commitment to you always applies: We will work together with you as your partner. You will receive a tailored solution specially developed for you that suits your individual requirements. You will benefit from leading products and high profitability as we continually strive to improve our quality and throughput times. To save energy and reduce consumption of raw materials, we manufacture using state-of-the-art technology while continually optimising our processes and products.

Website
SEIKI DEUTSCHLAND GMBH

Germany

Seiki Corporation is your partner for hot runner systems for runnerless injection moulding. Over a number of decades, our systems with a thermal seal (separately controllable heating of the tips of our hot runner nozzles) have enabled our customers to make savings thanks to lower maintenance costs and reduced raw material consumption. In addition, our technology enables the precision injection moulding of parts of all sizes with, for example, plastics reinforced by glass fibre or carbon fibre. Our global distribution network means that we can always assist you as a partner, from the early stage of your product development to providing fast maintenance of your Seiki hot runner tool. Seiki's technology is not only limited to plastic injection moulding – with our RUDIZ (Runner DIscard Zero) system, we also provide technology for the runnerless manufacture of rubber and LSR parts. Seiki – making the impossible possible.

See all products
HA-WI KUNSTSTOFFE GMBH & CO. KG

Germany

HA-WI Kunststoffe GmbH & Co. KG in its present form was formed in 1998 by the merging of KURI Kunststoff Verarbeitungs GmbH, founded in Bonn in 1959, and HA-WI Kunststoffe GmbH, located in Bad Laasphe since 1972. The two companies were merged at the Bad Laasphe site and both product ranges at that time were combined and expanded in line with market requirements. At the same time, the areas of technical items and quick-clamping systems have been continuously expanded and a quality management system has been implemented alongside state-of-the-art technology. The result is our current company with the three product divisions: Standard components, technical parts and BAKRA® quick-clamping systems

Website
GW BATTERIEN GMBH

Germany

As an innovative and flexible company, not only do we develop, build and supply battery systems using NiCd, lead and Li-ion technology, we also solve problems for a wide range of applications in the area of railway vehicle batteries and stationary battery systems. In combination with our extensive services, from reconditioning, storage and repairs through to customised leasing offers, we can assist you with our expertise. Our product range is rounded off by special innovations, including those in areas other than battery technology.

Website See all products
N&H TECHNOLOGY GMBH

Germany

As a reliable systems supplier of customised products, we can help to develop your ideas from their initial phase through to series production. We particularly focus on the implementation of customised operating units. To this end, our services include the manufacturing of electromechanical assemblies and the procurement of all other components required. Furthermore, we will of course support you in the manufacturing of individual components – true to our guiding principle of being able to offer everything as a sole supplier. As a typical example, we can provide input devices that, along with keyboard elements, include a display, housing, analysis electronics and complete connection systems with cable assembly. We rely on cost-efficient manufacturing at selected production sites in Asia. All these production facilities are certified in accordance with ISO9001, ISO14001, TS16949 and ISO13845. The European quality standards of our products are guaranteed by a comprehensive QA system at these plants and in-house.

All the products for "thermally moulded plastic parts"

Plastic Parts, Moulded Parts

Website See all products

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

SCHAUENBURG INDUSTRIETECHNIK GMBH

Germany

Schauenburg Industrietechnik GmbH, based in Nuremberg, is part of the globally active SCHAUENBURG INTERNATIONAL group of companies. The company's services are used by the automotive industry, the construction industry, mechanical engineers and producers in the household appliance sector. As an internationally recognised development and production partner, the company produces plastic and rubber moulded parts from drawings. The portfolio is rounded off by hoses, stamped parts and profiles. One particular advantage of the company is that it produces its own plastic moulded parts. Fully automated 24/7 production guarantees maximum efficiency for small and large-scale production alike. The company specialises in ultra-small moulded parts, measuring less than 10 mm. The variety of products offered is also matched by the scope of the logistics service: Tailored solutions in C-parts management and kanban highlight the importance placed on customer orientation and performing in line with the market. Schauenburg Industrietechnik GmbH is certified to DIN EN ISO 9001 standard

Website
BÄCKER GMBH & CO. KG

Germany

Bäcker has been a manufacturer and supplier of technical standard parts and control elements made of plastic and metal, as well as individual solutions made of plastic for industry, for more than 40 years. The wide product range of more than 5000 items with a total of 23, 000 different variants and dimensions of standard products from the three series PlacoGrip®, PlacoTec® and PlacoCap®. Overview of our product series. PlacoGrip® – control elements (knobs, levers, hinges, etc.). PlacoTec® – standard elements (DIN screws, nuts, washers made of plastic, etc.). PlacoCap® – protective elements (caps, plugs, sanitary fastenings, etc.) We manufacture products for leading industrial companies from a variety of sectors: Electrical engineering electronics, medical technology, machinery and systems engineering, the automotive industry, the chemical industry, shipbuilding, the leisure and sports equipment industry, the sanitary industry and rehabilitation equipment.

Website See all products
WEBER GMBH & CO. KG, KUNSTSTOFFTECHNIK UND FORMENBAU

Germany

The Weber Group is a development supplier and system partner providing sophisticated plastic solutions for customers in the automobile, building technology and household appliance sectors. With approximately 1, 300 employees, this medium-sized family business develops and manufactures products at sites in Germany, Poland and China. In addition to its core business of plastics technology, wezi-lit sealing putties have been an additional area of operations of the Weber Group since it was founded in 1949. The company is certified DIN ISO 9001, IATF 16949, DIN ISO 50001 and DIN ISO 14001. Calling on its expertise and passion, the day-to-day mission of the Weber Group is to create fascinating ideas and exceptional solutions offering customers outstanding benefits.

All the products for "thermally moulded plastic parts"

Building Technology (Plastics Technology)

Website See all products
BECHTOLD & SOHN GMBH & CO. KG

Germany

A name that has sounded good since 1885. It is not a sheer coincidence that Bechtold & Sohn can look back on a long and successful history. Now in its fourth generation, the family-run company will continue to remain on course with the same values held by master woodturner Johann Peter Bechtold when he founded his company back in 1885: Quality, continuity, personality and dedication. These virtues form the cornerstone of the company philosophy and have enabled Wolfgang Bechtold and his 150 employees to gain an excellent reputation among industrial companies, predominantly in the fields of pharmaceuticals, medicine and chemistry. Enthusiasm for plastic and technology Plastic has been the material of choice at Bechtold & Sohn for more than five decades now. This results in an enormous wealth of experience which our highly skilled employees use to produce plastic parts for well-known customers in three-shift operation.

Website
TOBY SCHAUM GMBH POLYURETHANVERARBEITUNG

Germany

TOBY Schaum, founded in 1960, has been involved in the development of polyurethane moulded parts for series production right from the very start and can currently draw on 50 years of experience. As a result, our company boasts long-established expertise in the realisation of demanding customer projects in just about every industrial sector. We take great interest in supporting the design of moulded parts early on in the planning phase. Get in touch with your enquiry – we would be happy to help! TOBY Schaum produces integrated foam polyurethane moulded parts (semi-hard) in shore hardnesses from approx. 20 Shore 00 up to approx. 90 Shore A and moulded parts from rigid foam (integrated rigid foam and compact material) with densities of approx. 200 kg/m3 to 1100 kg/m3.

Website

WILHELM-PLASTIC GMBH & CO KG

Germany

We are your partner for design parts and technologically advanced solutions, which we accompany from the prototype up to series production. Working since 1958 in the processing of synthetic materials, we possess a magnitude of experience and extensive knowledge in the development, manufacture, assembly and series introduction of thermoplastic parts. Surface design and tool conception are some of our special areas. The realisation of the quality standard desired by the customer is the top priority for us. We are certified according to IATF 16949-2016 and have made it our aim to consistently further develop our quality assurance system at this level. The best quality, flexibility and delivery reliability underlie our good reputation. The customer satisfaction known by everyone is furthermore guaranteed through friendly and competent specialist advice and comprehensive order support

All the products for "thermally moulded plastic parts"

POLYMER CERAMIC COMPONENT PARTS

Website See all products
PAUL THOORS GMBH KUNSTSTOFFVERARBEITUNG

Germany

Manufacture of suction cups in all variants. Suction cups with threads, suction cups with hooks, suction cups with clamps, suction cups with cross holes, suction cups with studs, suction hooks, double suction cups and wall hooks. Paul Thoors GmbH is a market leader in its sector and has been producing high-quality suction cups and plastic items for a wide range sectors for over 65 years. The majority our total production volume is the manufacturing and distribution of our own products. We also manufacture according to drawings or samples as contracted work and as a supplier. We produce our wide range of products on the very latest production systems, e.g. with insertion robots and automated handling systems, thereby ensuring an efficient and reliable production flow.

Website

WETEC GMBH

Germany

Founded in 1999, we are specialists in die and mould manufacturing and produce prototypes, small series and large series of plastic products for a wide range of applications. We design and manufacture the tools required for use at our site (as a system supplier in series production) or for use at the customer's premises. Moreover, we are happy to produce customised tools. Thanks to our cross-industry production facilities, we are partners for customers from the automotive, electronics, tool manufacturing, mechanical engineering and plant engineering sectors, as well as for measuring technology companies and many others besides. We develop tailor-made solutions designed to be sustainable and future-proof – whether we are manufacturing individual components, supplying ready-made products or acting as a full service partner. Our profile: - Injection-moulding machines with a clamping force of 25–320 t - Manufacturing of injection-moulded parts of 1–1200 g in weight - Injection moulding of insert parts - Manufacturing with the gas injection method. We process all thermoplastic materials and elastomers. Our specialities: PA6T/6I GF 50 FWA with drinking water approval. Conductivity. Materials with anti-slip or flame-retardant properties. In order to manufacture tailor-made and high-quality plastic products, you need to have the right hardware. We have fully equipped die and mould manufacturing facilities where we produce high-quality injection moulding tools. We also use Cimatron E CAD/CAM software to assist us with designing and adapting items for the injection-moulding process

Website
LOUVRETTE GMBH VERPACKUNG + DESIGN

Germany

LOUVRETTE has specialised in the development and production of top-quality plastic packaging solutions for the cosmetics industry for more than half a century.

Website
BUCK SPRITZGUSSTEILE FORMENBAU GMBH

Germany

Buck Spritzgussteile Formenbau GmbH was founded in 1985. Our core competence today is the high-quality production and global sale of top quality injection-moulded parts for the supplier market to the automotive industry. Continuous growth, specialist qualification and transparent communication – the three cornerstones on which the success of our medium-sized family-owned enterprise is built. Our declared aim is to satisfy our customers; our top priority is the development of a comprehensive solution: Individual consultation, short decision-making processes and flat hierarchies facilitate our reliable implementation of projects. Range of services: Fully and partly automated production, compact injection moulding, multi-component injection moulding (2K), MuCell technology, injection moulding of insert parts, robot-controlled removal, camera monitoring, internal pressure monitoring, assembly and painting. All machines feature MDC (machine data collection). Our machinery includes: From 15 t to 400 t.

Website
WALDKRAFT GMBH - BÜRSTEN- UND KUNSTSTOFFTECHNIK

Germany

Waldkraft GmbH, founded by Knotz Bürsten GmbH, has been producing wooden and plastic brushes and injection moulding products of all kinds for over six decades to the satisfaction of its customers. As an independent family business, we are characterized by our commitment to our business partners and employees. The high quality standards of our products are at the heart of what we do. The versatility of our products stands us out from the crowd. The benchmark for this is the requirements of our customers. We believe the customer is king. To achieve these goals, it is key that our employees are motivated, highly trained and satisfied. We also feel a responsibility to our environment. Therefore, we use our wood waste as a heating medium for our factory. Furthermore, we use 100% natural energy sources for production.

Website See all products
HIRT METALL-UND KUNSTSTOFFTECHNIK

Germany

The satisfaction of our customers is our top priority, which is why providing a trustworthy, personal contact is so important to us. We want to support you as a reliable partner. Do you have a task to solve? – Then we have the solution! We specialise in the manufacture of connecting elements as well as turned and milled parts. Our strengths: Reliability, expertise, quality assurance, punctuality, innovation and flexibility.

Website
MPI EUROPE GMBH

Germany

The MPI family of companies (Managed Programs and Performance Design) is a global product design, development and manufacturing company, supplying composite engine, automotive and marine components. We design and manufacture, among others, intake manifolds, valve covers and oil pans. MPI Europe also has many years of experience in e-mobility, medical technology and consumers. Our focus in Europe is components sensitive to warpage (e.g. coolant tanks, scoops) and complex assemblies (with 2K parts and kinematics, e.g. air-conditioning systems) We use our design expertise in prototypes and series production of plastic and carbon fibre components to offer high value to low- and medium-volume OEM, Tier 1, performance and motor racing customers. We offer European and American customers a convenient logistics concept with local tool sampling, part production and project management with technical communication in German or English.

Website
PLS GMBH

Germany

The top objective of our company is to make our customers happy. This means that we must recognise their needs, satisfy their requirements and exceed their expectations. In addition to a high product quality, the range of services offered is an important criterion for many customers. This is why we have striven right from the start to set up our departments in such a way that they complement each other. The collaboration between our mould construction, injection moulding, industrial assembly, quality assurance and post-processing departments allow us to cater expertly and very flexibly to the wishes of our customers. The prerequisite for this is communication. We need information to be able to offer an optimum product. This is why we consider feedback of any kind as important information for continuous improvement and further development. This is a cornerstone of our company's success.

Website
HEBMÜLLER GMBH

Germany

Since being founded, the owner-managed company was a partner to the automotive industry before the strategy was changed in 2018 and the decision was made to concentrate on customers from other branches of industry. Right from the very beginning, the delivery range comprised most of the same products as it does today, including grey cast iron piston rings, PTFE structural parts and plastic sieves. Elastomer moulded parts followed at the end of the 1980s. Nowadays, the products we focus on are sieves, screens and filter elements made from plastic using the injection moulding method. Either plastic or wire mesh is placed in the die and overmoulded with plastic. Seals and ready-made seal sets for the automotive spare parts market complete the range. Our objective is to provide customers with the best service and create added value through the very highest quality of customer support. The loyalty of our customers is the consequence and result of our quality.

Website See all products

SKS METAPLAST SCHEFFER-KLUTE GMBH

Germany

SKS metaplast: Your point of contact for construction plastics, extrusion & masks. With a global reputation as an innovative manufacturer of air pumps and mudguards for the bike market, SKS is now applying its expertise in the field of plastics processing to other sectors: The automotive, sanitary, home services, construction and electrical industries. Even in the early stages of each project, we see ourselves as a competent and active service partner to help customers optimise and achieve their objectives. From the initial concept, through construction, analysis of components, selection of materials, and manufacture of prototypes, to testing of components and quality control, we are a partner who knows its trade. SKS produces high quality plastic parts with the knowledge that they can be used to save energy and raw materials and make a contribution to a sustainable quality of life. Since 2020, SKS has also been producing reliable disposable face masks in Germany.

Website

Find quotes for

Filters

Results for

Thermally moulded plastic parts - Germany

Number of results

21 Companies