thermal conductivity adhesive Germany

... adhesive is particularly suitable for applications where high adhesion strength and precision, rapid curing, and high thermal conductivity are required. • Thermal conductivity: 1.55 W/mK • High permanent adhesion strength • Very fast RTV condensation curing • Volumetric mixing ratio 10:1 (A : B component) Show complete detailed description Show less...

... load, this also includes mass and type of the material to be heated (thermal conductivity, surface quality, etc.) installation / assembly situation (bonded, vulcanised, clamped, etc.), ambient temperature, air movement and, of course, the control technology used. Application examples for silicone heater mats include: canteen kitchen technology / catering, anti-fog and anti-freeze applications, tool...

... sectors – such as automotive technology, measurement and control technology, heating elements, power electronics, solar technology, heat sink sensors, PC technology, forming technology, heat exchangers, etc., large retorts (here TU-tested - approximately 80% improvement in thermal conductivity achieved).

...Various Thermal Conductive Materials for Numerous Applications We offer: -Silicone-coated insulating material for semiconductors - washers -Thermal conductive films made of silicone elastomer -Silicone-free thermal conductive films -High thermal conductivity graphite films -Single-sided adhesive thermal conductive films -Dual-sided adhesive thermal conductive films -GAP-FILLER, thermal conductive foam and GEL films -Kapton insulating discs -Mica discs -Alumina discs -Thermal conductive pastes and thermal conductive films -Thermal conductive adhesives...

...Structure Film + adhesive + aluminum foil Total thickness 120 microns Technical Data High temperature stable 270 °C in 30 min Adhesive conductivity ≤ 10³ Ω.cm Adhesive strength 1.5 N. Properties Thermal conductivity, shielding, sealable, conductive Applications Aerospace, electronics, automotive industry, construction sector Country of origin: China...

...difficult to ignite Thermal conductivity: 0.055 W/(m² · K) Thermal insulation: >0.7 W/m² · K Temperature resistance: -30°C to +90°C Vapor diffusion resistance number: 100 μ x thickness / mtr Joint permeability: a <0.1 [m² (h.m (daPa) 0.9] vapor-permeable Driving rain resistance: Requirement met up to >601 Pa Sealing of exterior wall joints: BG/1 Permanent movement absorption: >25% Tensile strength: 160 kPa Elongation at break: 250% Weather resistance: Classification met Blower Door Method: Met Storage time/storage temperature: 12 months from production date / +1°C to +20°C...

...). [APPLICATION:] For the construction of single-family homes or multi-family homes: construction and partition walls made with aerated concrete blocks or polished ceramic blocks. [FEATURES:] - Accelerates masonry work - Eliminates thermal bridges - Easy and convenient handling - Reduces overall costs Parameters Ambient temperature (surface and air): from -10°C to +30°C Can temperature: from +10°C to +30°C Maximum open time: < 3 Min. Correction time: < 15 Min. Full curing time: < 30 Min. Thermal conductivity: 0.036 W/mK Shelf life: 12...

...Polytec TC 301 is a one-component, metal-filled, heat-curing epoxy adhesive with excellent thermal conductivity. Polytec TC 301 is characterized by outstanding adhesion to many metals (steel, aluminum, non-ferrous metals), ceramics, and various plastics. It is particularly suitable for high-strength bonding applications where heat dissipation is also required. Curing can occur from 120 °C. Application can be done by dispensing or manual application.

...Sound and Thermal Insulation for Roller Shutter Boxes The roller shutter box insulation is a combination of an absorption layer, the open-cell melamine resin foam Hanno-Tect, with 5 or 10 kg/m² flexible heavy foil. The foam layer provides excellent airborne sound absorption and thermal insulation due to its low thermal conductivity of < 0.035 W/(m·K). The flexible heavy foil stabilizes the roller shutter housing and increases its surface weight. This reduces sound permeability. A convenient installation of the panels is ensured by the self-adhesive foil, rounding off the excellent product range.

...Manufacturing of Custom Silicone Coatings Unique Materials and Proprietary Manufacturing Processes: MITEX silicone coatings with extremely anti-adhesive surfaces, as well as temperature resistance and both thermal and electrical conductivity, set standards worldwide. - Different Shore hardnesses - Various temperature ranges - Available in antistatic or electrically conductive options...

... underfloor heating ◾Thermal conductivity: ISO 8302 0.16 m2 KW ◾Impact sound insulation: ◾Fire class: ISO 11925-2 Class Ef1 ◾Carpet pollutant testing: CUT NR.: 20463 ◾Total weight: 2,000 g/m² MANUFACTURING PROCESS: H-PVC angle profile 25 X 55 x 627 mm, fixed with odorless special hot melt adhesive through step mat press with integrated adhesive system. Shape-retaining due to an angle profile with...

... systems with a thermal conductivity of 035. A highly compressed surface layer ensures excellent plaster adhesion and easier anchoring. The coating on the board surfaces allows for the mechanical application of the adhesive mortar on the substrate as well as the plaster application without pressure smoothing. General Product Information: Edge formation: Smooth Dimensions (net): 800 x 625 mm Coated on both sides Thermal conductivity group: 0.034 Thickness mm: 80 mm...

...The requirements: highly precise tolerances without surface grinding extremely thin silicone coating layers (in picture: 0.6 mm) high silicone thermal conductivity (in picture: > 0.8 W/mK) anti-adhesive, thin top coatings (in picture: 30µm PFA)...

... - Punched, cut seals - Plates, foils - Semi-finished items - Form articles Benefits: - Highest chemical resistance - Insoluble and does not swell in organic or anorganic solvents - Resistant to the weather - Temperature range -190 to +250 °C - Highly anti-adhesive, does not stick - Resistant to hydrolysis Common fillers: - Quartz - Glass - Carbon / Graphite - Bronze - or without filters Fillers reduce the cold flow, lead to higher resistance to temperature and media, improve thermal conductivity and increase resistance to abrasion and pressure levels.

...Standards for Trade Aluminum is well established as a material for any technical construction. We are a preferred partner for many wholesalers and intermediaries in Europe, as we provide them with a wide variety of high-quality standard strips and sheets. Key Properties Lightweight and strong Easily formable Corrosion-resistant Good welding and adhesive bonding properties Excellent thermal and...

...Facade insulation board made of expanded polystyrene The rough surface of this shrinkage-resistant facade insulation board made of polystyrene particle foam provides ideal adhesion for adhesive and reinforcement mortar. Its proven insulation quality makes it a component of the doitBau® thermal insulation composite system "EPS". • Cost-effective with very good thermal insulation properties According to ÖNORM B 6000 Building authority approved Bending strength: =115 kPa Raw density: =15 kg/m3 Dimensions: 1.0 m x 0.5 m Thermal conductivity: 0.032 W/mK...

Customized products are our strength. E.S. Electronic Service GmbH produces and markets customer-oriented solutions worldwide. In doing so, we focus our resources on electronic components, materials with an emphasis on EMV shielding, heat conduction, as well as interference filters and absorbers. Customized products according to individual specifications for customer-specific applications, manuf...

Seifert electronic manufactures custom heat sinks for the safe dissipation of heat from electronic components. As a powerful partner for various industries, we offer a wide range of profiles today, from standard heat sinks to custom-designed special profiles. With heat sinks made from aluminum extrusions, Seifert electronic has built a reputation over the years. Our team of more than 50 employees...

... consistently expanded; pure distribution activities were steadily reduced to increase the internal value creation share of the company. In 2004, the business activities were expanded to include the area of \"thermal management.\"\n\nDREYER SYSTEM is certified according to ISO 9001:2015.\n\nPhilosophy\n\nCustomer satisfaction is at the center of our considerations. To achieve this goal, the...

... very diverse due to the positive properties of this material. The cellular structure and low density make them a popular material for various uses. Foam is particularly popular as packaging, which is why it is available in a wide variety. This is supported by excellent thermal conductivity, low weight, and good processability, allowing foam cuts to be made with minimal tooling costs. But foam is not...