Results for

Testing of products and materials - institutions - Germany

27 Companies

6 Products

COMET YXLON GMBH

Germany

YXLON International - innovative High-Tech-Company with long tradition YXLON International develops, manufactures and markets digital radioscopy and computed tomography inspection systems for a wide range of industrial applications. With locations in Hamburg, Hattingen (Germany), Hudson and San Jose (USA), Yokohama, Beijing and Shanghai (China) and a tight net of agents in around 50 countries, Yxlon is represented with its systems and services worldwide. The product range expands from X-ray components such as tubes and detectors, complete shielded device for radioscopy and three-dimensional computed tomography up to customized solutions. With high-energy systems up to 600 keV for the inspection of e.g. large castings to high-resolution microfocus systems in the nanometer range for e.g. smallest electronics components such as microchips, a huge bandwidth of potential applications is covered by Yxlon inspection systems. In addition, Yxlon offers comprehensive application and inspection services as well as trainings and consultancy at his application centers in Hamburg, Hattingen, Beijing, Hudson, and San Jose.

See all products
MPINGER GMBH

Germany

Rabwin Industries has world-class CNC machines of various types to deliver precision machined parts, assemblies and sub-assemblies with consistent quality. Rabwin strives to provide unbeatable "value for money" to its customers by introducing "world class quality products and services" with a focus on on-time delivery as our standard. Our commitment to meet customer expectations is based on a systematic approach to continuous improvement of our process and quality management system. This is what has set us apart from others. At Rabwin, we focus on quality and on-time delivery. Our machining centres are well-equipped CNC turning centres, CNC VTL, CNC VMC, HMC, CNC gear hobbing, CNC grinding, CNC balancing, CNC wire cutting, etc. We also have our own design and tool room where we can manufacture jigs and fixtures.

All the products for "testing of products and materials - institutions"

Manifold Leak Test Spm – 1 No

See all products
SOLARSPRING GMBH MEMBRANE SOLUTIONS

Germany

When traditional water treatment methods reach their limits or process fluid disposal becomes uneconomical, we put to use our membrane distillation technology. Through the use of waste heat or renewable energies, we can improve the CO2 balance of your company. We offer complete solutions for industrial waste water treatment. Our products are used in the metallurgical industry in the field of printed circuit technology, or in research. For drinking water treatment, we use our solar-powered MBS systems, which produce crystal-clear water through up to five treatment stages. Since 2009, SolarSpring GmbH, membrane solutions, has become a world-leading membrane distillation specialist. We don't just believe in the importance of water; we work together with regional suppliers and are committed to a purposeful company structure.

All the products for "testing of products and materials - institutions"

Water preliminary test

See all products
FGH ENGINEERING & TEST GMBH

Germany

FGH offers a diverse range of additional services for all testing activities taking place at the platform. Thanks to its crane and lifting equipment, and transport vehicles (fork lifts and moveable platforms) the customer will be facilitated in the assembly and disassembly phase of his test objects, receiving also the adequate support in order to reduce, as much as possible, his permanence mainly to the testing time. Furthermore, in CESI Group health, safety and environment are a major concern, for this reason we provide to our customer SF6 handling equipment ; everything in order to to make sure that the tightest German, European and international rules are observed.
ZEROS GMBH

Germany

The company ZEROS GMBH, is a Service Provider, which operates in the Testing of products and materials - institutions industry. It is based in Berlin, Germany.

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

BUNDESFACHGRUPPE WARTUNG - SICHERHEIT FÜR SPORT- UND SPIELGERÄTE E.V.

Germany

The company BUNDESFACHGRUPPE WARTUNG - SICHERHEIT FÜR SPORT- UND SPIELGERÄTE E.V., is a Service Provider, which operates in the Medicine and surgery - apparatus and equipment industry. It also operates in the Quality control and certification, Testing of products and materials, Testing of products and materials - institutions, Engineering - industrial contractors, Quality control and certification, Testing of products and materials, Testing of products and materials - institutions, and Engineering - industrial contractors industries. It is based in Köln, Germany.
MERZ TECHNOLOGIES

Germany

The company MERZ TECHNOLOGIES, is a Service Provider, which operates in the Radiology equipment, industrial industry. It also operates in the Testing of products and materials - institutions, Measurement and regulation equipment and instruments - output and flow, Measurement - Equipment & Instruments, CAD/CAM Computer Assisted Design/Computer Assisted Manufacturing - software, Testing of products and materials - institutions, Measurement and regulation equipment and instruments - output and flow, Measurement - Equipment & Instruments, and CAD/CAM Computer Assisted Design/Computer Assisted Manufacturing - software industries. It is based in Essingen, Germany.
LABORDATA GMBH

Germany

The company LABORDATA GMBH, is a Service Provider, which operates in the Testing of products and materials industry. It also operates in the Testing of products and materials - institutions, and Testing of products and materials - institutions industries. It is based in Braunschweig, Germany.
MATERIALPRÜFUNGS- UND VERSUCHSANSTALT NEUWIED, FORSCHUNGSINSTITUT FÜR VULKANISCHE BAUSTOFFE GESELLSC

Germany

The company MATERIALPRÜFUNGS- UND VERSUCHSANSTALT NEUWIED, FORSCHUNGSINSTITUT FÜR VULKANISCHE BAUSTOFFE GESELLSC, is a Service Provider, which operates in the Testing of products and materials industry. It also operates in the Testing of products and materials - institutions, and Testing of products and materials - institutions industries. It is based in Neuwied, Germany.
BAUGRUND STRALSUND INGENIEURGESELLSCHAFT MBH

Germany

The company BAUGRUND STRALSUND INGENIEURGESELLSCHAFT MBH, is a Service Provider, which operates in the Testing of products and materials industry. It also operates in the Testing of products and materials - institutions, and Testing of products and materials - institutions industries. It is based in Stralsund, Germany.

COMPRA GMBH INSPEKTIONSGESELLSCHAFT FÜR QUALITÄTSSICHERUNG & RÜCKBAU

Germany

The company COMPRA GMBH INSPEKTIONSGESELLSCHAFT FÜR QUALITÄTSSICHERUNG & RÜCKBAU, is a Service Provider, which operates in the Testing of products and materials industry. It also operates in the Testing of products and materials - institutions, and Testing of products and materials - institutions industries. It is based in Frechen, Germany.
PROTECH GMBH QUALITÄTSSICHERUNGSSYSTEME UND AUTOMATION.

Germany

The company PROTECH GMBH QUALITÄTSSICHERUNGSSYSTEME UND AUTOMATION., is a Service Provider, which operates in the Testing of products and materials industry. It also operates in the Testing of products and materials - institutions, and Testing of products and materials - institutions industries. It is based in Maulbronn, Germany.

ASPHALTA PRÜF- UND FORSCHUNGSLABORATORIUM GMBH

Germany

The company ASPHALTA PRÜF- UND FORSCHUNGSLABORATORIUM GMBH, is a Service Provider, which operates in the Testing of products and materials industry. It also operates in the Testing of products and materials - institutions, and Testing of products and materials - institutions industries. It is based in Berlin, Germany.
INSTITUT DR. ROTHE GMBH

Germany

The company INSTITUT DR. ROTHE GMBH, is a Service Provider, which operates in the Testing of products and materials industry. It also operates in the Testing of products and materials - institutions, and Testing of products and materials - institutions industries. It is based in Bochum, Germany.
LUXCONTROL GMBH

Germany

The company LUXCONTROL GMBH, is a Service Provider, which operates in the Testing of products and materials industry. It also operates in the Testing of products and materials - institutions, and Testing of products and materials - institutions industries. It is based in Hamburg, Germany.
NORDTEST PRÜFGESELLSCHAFT MBH

Germany

The company NORDTEST PRÜFGESELLSCHAFT MBH, is a Service Provider, which operates in the Testing of products and materials industry. It also operates in the Testing of products and materials - institutions, and Testing of products and materials - institutions industries. It is based in Rostock, Germany.
I.S.P. INSTITUT FÜR KRAFT- UND SCHMIERSTOFFPRÜFUNG GMBH

Germany

The company I.S.P. INSTITUT FÜR KRAFT- UND SCHMIERSTOFFPRÜFUNG GMBH, is a Service Provider, which operates in the Testing of products and materials industry. It also operates in the Testing of products and materials - institutions, and Testing of products and materials - institutions industries. It is based in Salzbergen, Germany.
TÜV RHEINLAND PRODUCT SAFETY GMBH

Germany

The company TÜV RHEINLAND PRODUCT SAFETY GMBH, is a Service Provider, which operates in the Testing of products and materials industry. It also operates in the Testing of products and materials - institutions, and Testing of products and materials - institutions industries. It is based in Köln, Germany.
PRO-TECTION GMBH

Germany

We produce respiratory protection at the Niedenstein site. The OP mask has been checked in a German laboratory according to EN 14683 Type II. Specially approved by the German Federal Institute for Drugs and Medical Devices. Our face mask passed the test according to the EN 14683: 2019-10 Type II standard on 19th June 2020 in a German laboratory. Basic information: BFE (bacterial filtration efficiency) = 99.97%, limit value 98%, pressure difference (breathing resistance) = average of 29 Pa/cm², limit value 40 Pa/cm². Microbiological purity = average of 8.8 CFU/g, limit value 30 CFU/g. Dimensions 17.5 cm x 9.5 cm. For our face masks, we therefore rely on a combination of different micro non-woven filter materials, which clean the air in a filter cascade and consequently allow a wide range of uses. The mask is made of three layers. The middle layer is made out of ultra-fine melt-blown material (virus and bacteria filter). We use a product from a prominent German manufacturer here.
COLLIN LAB & PILOT SOLUTIONS GMBH

Germany

COLLIN Lab & Pilot Solutions With headquarters in the Bavarian city of Maitenbeth, COLLIN develops intelligent pilot and laboratory lines in modular system for plastic processing companies as well as for research institutes. The owner-managed company has been in business, as premium provider, the company sets worldwide technical and qualitative standards. COLLIN solutions are used for the development and the production of plastic products, material analysis, test series up to pilot tests which allow a scale up to production scale. As part of the product lines Teach Line, Lab Line, Pilot Line, Medical Line and Polytest Line, Collin develops individual solutions – platen presses, roll mills, calenders, extruders, compounders, mono or coextrusion lines, pressure filter tests, rheometers or optical inspection systems. Material manufacturers, compounding companies, film manufacturers, companies in the medical, pharmaceutical and industrial sector, universities, laboratories and research institutes count on Collin - best quality since 1972. We think in plastic solutions! Contact us: https: //www.collin-solutions.com/en

TIRA GMBH

Germany

TIRA GmbH is a global supplier of measuring and testing systems for industry and research. We develop and manufacture modern systems and application-oriented software to simulate environmental influences, to test the properties of materials and to detect and eliminate unwanted vibrations. We manufacture and provide: Balancing machines for motor armatures, tools, articulated shafts, fans and crankshafts; electromechanical manufacturing and special-purpose machines, spindle machines, universal testing machines, modernisation of testing machines and calibration in accordance with the DAkkS (German Accreditation Body); electrodynamic vibration test systems, vibration exciters (shaker units), modal test systems, modal shakers, modal exciters, inertial shakers, long-stroke vibration test machines, vibration control systems for sine, random, shock and mixed modes, linear or hydrostatically guided slip tables, calibration systems, digital and analog amplifiers; machine and machine tool construction and mechanical engineering.

Website
ATLAS MATERIAL TESTING TECHNOLOGY GMBH

Germany

For more than 100 years, Atlas has been the pioneer in continually developing new solutions in order to assist companies in testing the durability of their products. From our first instrument in 1915 (the Solar Determinator), which simulated the fading effect the sun has on fabric, through to today's comprehensive network of weathering – a range of services and products for materials testing – our focus has remained the same. We offer our customers sophisticated technologies and advanced testing solutions so that they can determine the durability of their products. As a result, our customers can reach their ultimate goals: Quality products, competitive advantages and faster times to market. We help our customers to develop testing programmes with which they can obtain the data they need to make the right decisions relating to the material performance of their products.

Website See all products
CASOCLEANCHECK QUALITY IMPROVEMENT GBR

Germany

CasoCleanCheck GbR specialises in inspecting the technical cleanliness of components. We use a special analysis facility for this purpose. In addition to the residual dirt analysis of functional components, we have also become specialists in the inspection of decorative components. The measurement of component cleanliness plays a significant role, since it is gaining increasing significance as a sign of quality, and is also more frequently recorded on drawings (CCC = component cleanliness code), through which it can be quantified as well. Our procedures and standards, which have been specially developed for this purpose, allow us to generate fast, reliable, reproducible and cost-effective results. The residual dirt analyses that we perform conform to the standards of the new VDA 19 (ISO 16232). Our clients include some of the most well-known names in the automotive supplier industry. The company CasoCleanCheck is accredited to the DIN EN ISO/IEC 17025 standard as of March 2013.

Website
BONAS MESS- UND PRÜFTECHNIK

Germany

The company BONAS MESS- UND PRÜFTECHNIK, is a Retailer, which operates in the Testing of products and materials industry. It also operates in the materials testing, and Non-destructive control industries. It is based in Bad Fallingbostel, Germany.
VOGT ULTRASONICS GMBH

Germany

LEADING THE WAY SINCE 1983 – YOUR QUALITY ASSURANCE IS OUR SPECIALITY! Offering groundbreaking ultrasonic testing technologies and processes as well as a comprehensive range of services, we are your ideal partner for non-destructive quality assurance. Besides developing and producing high-performance ultrasonic testing equipment and systems, we are also sales partner to well-established manufacturers and a reliable technical partner to some notable companies. Whether you require a standalone solution or one that integrates into individual ultrasonic testing systems, we can tailor your testing equipment to your specific requirements and situation. In the shape of our very own PROline ultrasonic testing systems, we present a wide range of options to suit our clients' specific testing processes. These robust ultrasonic systems test components in a cost-effective manner across a variety of sectors, including aerospace, automotive and metalworking industries. We conduct conventional tests either on your premises or from our test centre.
MATERIALPRÜFUNGSAMT NORDRHEIN-WESTFALEN

Germany

The MPA NRW acts as a testing, monitoring and certification body, predominantly for customers from small- and medium-sized businesses and industry. We test, monitor and provide certification for the following sectors: Construction products, construction materials, metals, fire protection, safety glass, radiation protection, calibration with internationally recognised accreditations. The requirements pertaining to quality-management systems are defined by the standard DIN EN ISO 9001 as well as by other standards. We are independent, objective and customer-orientated.
ZWICKROELL GMBH & CO. KG

Germany

ZwickRoell is the world's leading supplier of materials testing machines. Our materials testing machines are used worldwide in R&D and quality assurance in more than 20 industries. For more than 160 years, ZwickRoell has stood for reliable test results, excellent service, and quality and reliability in materials and components testing. ZwickRoell offers: static testing machines, dynamic and fatigue testing machines, hardness testers, pendulum impact testers and over 15 other product groups regarding mechanical materials and components testing. With innovative product developments, a comprehensive range of products and global service, the family-owned company supplies customized solutions to meet the highest demands both in research and development and in quality assurance for more than 20 industries. With over 1, 500 employees, production facilities in Germany (Ulm, Radeberg, Bickenbach), the United Kingdom (Stourbridge), Austria (Fürstenfeld), and subsidiaries in France, the UK, Spain, the USA, Brazil, Turkey, Singapore, and China, and together with agencies in 56 countries around the world, the ZwickRoell brand is a guarantee of the highest product and service quality.

All the products for "testing of products and materials - institutions"

Universal testing machine - AlllroundLine

Materials testing machine up to 5 kN - zwickiLine

ZHU250CL universal hardness testing machine

ProLine for standardized tests

Extrusion Plastometer - Mflow

See all products

Find quotes for

Filters

Results for

Testing of products and materials - institutions - Germany

Number of results

27 Companies