welded plates Germany

... transfer tables - High-precision vacuum clamping plates for high-pressure presses - Complete rudder systems We produce both: individual components and small series. Do you have any questions about our techniques, capacities or prices? Contact us, we will be happy to give you direct information.

...Safe upending (90°) and rotating (180°) of coils Body design in solid welding construction with reinforced base with no pit or floor anchoring needed Body made of strong steel plates Base with large integrated floor plate and attached box construction to protect drive components Tilting unit with neatly welded half shell attachments and two reinforced coil tables welded at 90 degrees to...

Alumatex – Sustainable Cleanliness through Dirt Traps for Indoor and Outdoor Areas Banks, shopping centers, hospitals, offices, schools, office buildings, restaurants, cultural institutions, and many more are visited daily by hundreds of employees, customers, prospects, and guests. An unimaginable amount of unwanted dirt and dust is carried in on the soles of their shoes every hour, and in autumn...

...machine side parts, machine stands, machine frames, machine base frames, machine tables, extruder frames, press plungers, press stands, press tables, press lower parts, press upper parts, compression presses / forging presses / stamping presses, guide slides, welding carts, head pieces, clamping plates, etc.

...Optigreen Aluminium Planter for installation outdoors on roof areas or in earthbound open spaces and for installation indoors. Planter made from aluminium in standard and custom sizes with overflow, insulating cladding, and, where required, with welded junction plates as reinforcement. On request, available with automated irrigation unit and water level indicator. Material:Aluminium Nominal thickness:3 mm Weight:depending on the size Length:400/600/800/1,000/1,200 mm Width:400/600/800 mm Height:400/600 mm round Diameter:400/500/600 mm Custom shapes and sizes on request...

... materials such as mattresses, big bags, and tires. Maximum availability is guaranteed. Typical ZENO features such as the full steel rotor, gas-welded machine stand, steel flange bearing housing, and hydraulic service aids have been implemented in this series. The compactly built machine is characterized by quiet operation and particularly low power requirements while maintaining high throughput performance. We offer the ZENO single-shaft shredder in two series with bolted cutting plates on tool holders and hydraulic...

... for each loader assures true 90-degree force application to eliminate force angle error in testing. In addition, the loaders mechanical advantage reduces technician effort and fatigue, particularly in high-capacity tool testing. SR Mechanical Loaders use the highest quality ball screws to assure smooth operation and extended service life. Welded steel frames and rigid transducer mounting plates assure torque load is properly resisted. Optimized gearing selection reduces physical effort to operate, enhancing productivity and ergonomic safety.

... completely reliable process for your logistics flows. Exclusively from Craemer. Compared to traditional plastic surfaces, Craemer Palgrip® anti-slip plates offer absolute slip resistance even in high humidity conditions, thanks to their grain structure. The abrasion-resistant anti-slip plates are impressive with excellent slip resistance on the deck or beneath the welded pads, both on the top and under the feet, making them non-deformable. Even in an inclined position, your load remains secure on the pallet.

... requirements. Wire diameter (mm):1,4 - 4 Pitch range (mm):16 - 100 Cross rod diameter (mm):3,2 - 8 Gap Spacing (mm):2 - 20 Number of welded wires:0-3 Materials Available:EN 1.4301 (AISI 304), EN 1.4571 (AISI 316Ti), mild steel Gap width and fixing methods:Normal Gap, Ring, Spring, Distance Sleeves, Underwelded wire Optional Features:Chain Edge, Reinforcing plates, Cross flights, Side Guards...

...high-speed steam generators or thermal oil systems. In the heating systems from IFA Technology, the subsequent heat transfer takes place through half-tube coils welded onto the jacket, heat exchangers, heat transfer plates (thermoplates) or electrical heating cables.

... stainless steel. Ball caster spacing patterns are manufactured in accordance with your individual requirements. We supply every size of table. In the case of surfaces larger than 2,000×3,000 mm, several table plates are put together to make one table. The ball casters / ball transfer units are mounted by means of press fitting and are easily replaceable. They can be mounted in rows or positioned alternately.

...Automated longitudinal cutting of plates or with automatic 90° band twisting for combined longitudinal and transverse cutting – the vertical band saw machines from BEHRINGER are powerful and flexible. The robust, torsion-resistant welded construction combined with vibration-damping cast components ensures smooth operation and precise cuts. From non-ferrous metals and aluminum to steels and even...

... plates from 3.5 mm to 7 mm •  available in the structural shapes K, L, U and LU  •  complete seperation of the two gas flows •  different current lines possible •  different volume flows for exhaust and feed air,       applicable for the temperature control of useful heat Structural shape In principle, the shape is arbitrary.  The choice takes place after consulting with the customer and with similar power are no costs involved. It depends on the technical demands of the application.  The structural shape X (crossflow) isn't possible with the ´ THERMO GAS System.  Shape K    An absolute classic...

...The tube-to-plate welding heads achieve reproducible tube-to-tube plate welding results with consistently high quality, with or without additional wire. The tubes to be welded can be flush with the tubular plate, protruding, or set back from it. New are our two tube-in-plate welding heads RBK 38 S and RBK 60 S. The RBK 38 S is a compact and practical water-cooled head for welding tubes to plates with an inner diameter of up to 36.7 mm, without additional wire. Scope of supply — Welding head — Package of water-cooled hoses, 6 m — Tension rod B — Electrode holder 0° — Transport case...

...open cable routing Easy installation with VA stainless steel or plastic mounts SWS consists of bendable and yet robust 5 mm support rods with open routeing rings into which the cable is simply laid. Lines and hoses up to 16 mm can be safely accommodated – on straight sections or around corners. The support rods are attached with bolted-on plastic mounting plates or VA stainless steel mounts welded on to the machine body for example. Material:stainless steel rod Fastening:with stainless steel or plastic brackets...

... of DIBt Berlin (German Institute for Structural Engineering) Welded plastic construction made of sheet material, dimensioned according to static requirements Base area with removable PE perforated plates Integrated filling area in the front basin section 100 mm ground clearance due to foot construction, accessible from below Lockable with a padlock (not included in delivery) Material: PE-HD...

...electrical enclosures, and laboratory furniture. Complex inward and outward flanges can be accommodated with custom made tooling pieces. A wide range of materials can be welded, including Stainless Steel, Carbon Steel and Aluminium. Complete welded parts do not require any costly grinding, polishing or blending thus greatly saving on manufacturing costs. Pneumatic safety clamping system :No need for post weld grinding and polishing welded sheet metal plates with a 90° joint:max. welding length: 300 mm or 500 mm ...

... heat exchangers while maintaining consistently high, reproducible quality. It is also excellently suited for repair, maintenance, and servicing work. Process heat exchanger pipes particularly effectively and easily: With the new TX 38P for automated TIG orbital welding, base plates and heat exchanger pipes can now be welded together precisely and accurately, for instance, in thousands of...

...Enclosure construction, shielding plates according to your drawings - assembly We manufacture enclosures, enclosure parts, shielding plates, and shielding enclosures according to your drawings, primarily from stainless steel, aluminum, anodized aluminum (E6EV1), tinplate (solderable), galvanized steel, and sheet steel. Nuts and bolts can be welded or pressed in. The assembly of multiple parts...

... disconnected by grinding away the welding spots. These are the advantages Simply weld onto the item to be welded No need for repeatable holes in the workpiece No holes in the secutex impact protection material Applications On all metal surfaces On thin metal walls Everywhere where screwing is not possible or screw holes are unwanted Examples Collecting basins Ramp protection metal boxes Container Forklift Gripper Girder protection Pallet truck 1. Perforated metal sheet, overhang at the side This version is suitable for welding onto flat surfaces and extrawide profiles of construction steel.

...Combi decks are gratings with on top welded chequer plates. They combine ideally the advantages of both products. Chequer plates combine a closed surface with a slip-resistant effect. Gratings, on the other hand, have a high load capacity with a low tare weight. Lichtgitter-Combi deck is used for the industrial sector, e.g. chemical/petrochemical industry, power plants and cement industry as...

...Powder-coated steel plate, consisting of a perforated top sheet with square tubes welded underneath as a frame and cross braces. Standard frame profiles of 35/20 mm, 33/20 mm, and 30/20 mm are used, as well as custom profiles according to customer specifications, allowing for a variety of plate thicknesses to be available. Additionally, there is the possibility to vary the plate thickness through height adjustment, enabling the steel ventilation plates to be installed alongside other plate types.

...Anchor plates made of steel for civil engineering / special civil engineering, round or rectangular, with a center hole or angled hole, also with threaded holes, optionally shot-blasted and primed, and available with a welded pipe section upon request. Commonly used in bridge construction, deep and special civil engineering.

...Filter baskets with various perforations in the body and lid. Complete with welded handle.

...The edge beveling machines / milling machines shear the edge silently and dust-free using a cutting wheel, completely self-propelled, leaving a rough bevel. They produce perfect welding edges with the best price-performance ratio. They are capable of beveling both plates and pipes, including large diameters, as well as small parts and thin-walled pipes. CHP 12:24353 CHP 07:35333...

...The company MICHELFELDER is a specialist when it comes to laser-welded short pipes. Manufacturing of laser- and shear-cut plates from materials such as stainless steel, steel & titanium, which are shaped into pipe bodies and laser-welded using laser technology. This results in high-strength welds of excellent quality. If necessary, the short pipes are calibrated in a subsequent process to...

...Anchor plates and standardized components are used where steel components are to be welded onto reinforced concrete elements after pouring (e.g., stages, platforms, canopies, etc.). The product range extends from standard components that are available from stock with the shortest delivery times to custom constructions according to customer requirements. The design is carried out according to the latest guidelines, including an FEM analysis of the steel plate. High-strength and newly developed materials are also utilized.

... Plate Cart XL II Technical Data Dimensions (L x W x H): 1,680 x 660 x 1,670 mm Load area (L x W): 1,500 x 450 mm Solid rubber tires Ø20 mm Plate Cart XL Very robust due to the stable construction and the welded steel tube frame. Transported goods are not damaged thanks to the gentle wooden coating. Thanks to the securing edge (3 cm), the transported plates do not slip off the load area.

... horizontal connectors per bay • Color RAL 5010 gentian blue Included in the delivery are heavy-duty anchors and holding plates for stable anchoring in the ground. You can find more versions on our product page: https://www.lagertechnik.de/shop/schwerlastregale/kragarmregale/ Item number: 11-072-000115 Levels: 6 Total load capacity (including base level): 4800 kg Load capacity per arm: 200 kg System: Schulte...

...Sliding/Bearing Bushings / Pipe Slides with T and U Steel - Versions with one or more welded clamps - Available for various insulation thicknesses - Optionally available with PTFE supports and stainless steel sliding plates Sliding Bearings: Pipe Slides, Pipe Sliding Bearings...