water pipes Germany

...Spiral welded steel pipes used for the transport of water. Depending on requirements, they can be produced with epoxy lining and 3LPE coating. The pipes are manufactured according to the relevant standards EN 10224 and EN 10217. The wall thicknesses are between 4 mm and 25 mm. The outside diameter is between Ø 219.1 mm and Ø 2540 mm (8" - 100").

...Hydra construction pipes are available according to requirements with both "smooth walls" and reinforced ribs. Similarly, suitable materials can be processed from bare steel to stainless steel. From foundation use to temporary pressureless water conveyance, the pipes are available with both smooth walls and internal and external profiling, and are specifically tailored to the application or construction site. A comprehensive range of accessories ensures optimal usability.

... pressure-free circulation ensures high operational safety, low wear, long service intervals, and, last but not least, minimal fuel consumption. A tank system with 5 chambers, including a safety basin, prevents the leakage of operating fluids such as fuel, heating oil, or softener. Category: High Pressure Type: Hot Water Energy: Diesel-powered Configuration: Mobile...

...Reduction pipe complete for spindle passage >100mm 1 set of sleeves water basin extension maximum material diameter 91mm Article number: 5135360 MANUFACTURER ART-NR.: 052.092.1400...

... be "dead zone free" in accordance with the current drinking water regulations. This means that all areas of the drinking water distributor are flow-through. This is achieved either through an open horizontal flange closure or through upwardly directed elbow pipes. Following a recommendation from the Federal Environment Agency, we exclusively use chromium-nickel steel with material number 1.4571 in the drinking water sector, commonly referred to as "stainless steel V4A."...

...Radiator hose, suitable for water, acids and diluted bases. The hose retains its inside diameter even when it bends and, due to its structure, largely replaces any hose bend.

...With our many years of experience in the water and wastewater sector, we are able to deliver standard and custom components quickly and cost-effectively. Thanks to our extensive experience in the water and wastewater sector and the continuous development of our products, we can provide standard and custom components quickly and at a low cost. Furthermore, we offer a versatile inventory program of our fittings and components in various designs and materials.

...Rubber Suction and Pressure Hose Water hose for use with process water, slurry, light acids, and alkalis. Can be used as a suction hose and pressure hose. Operating pressure: 10 bar (ID 203/254 mm 6 bar) Burst pressure: 30 bar (ID 203/254 mm 18 bar) Vacuum: 0.8 bar Temperature range: from -30°C to +80°C Inner tube: SBR, black, smooth Outer cover: SBR, black, fabric-patterned Reinforcement: with steel wire spiral Bending radius: 5 x inner diameter...

...temperature resistant up to 200°C, full passage opening in 2- and 3-piece ball valves. Versatile Use: Suitable for water, air, solar fluids, chlorinated water, various liquids, gases, oil, gasoline, alcohols, solvents, AdBlue, and more. Technical Data: FSA Ball Valve Stainless Steel 316 1" 2-Piece 2-Way Construction: 2-Piece Temperature: -30° to 200° C Thread: G-Thread Pressure: 69.0 bar Kv Value / Cv Value: 72.00 / 84.00 Weight: 532 g Seal: PTFE Switching Cycles: 30,000...

...In almost every large industrial hall, there are supply air systems that bring cool air into the halls to make the climate bearable. In this area, IMH has been active for 20 years and has included cooling water piping in almost every piping project for a paint shop. These pipes extend from Germany across Europe to Asia, where IMH has successfully completed many projects to the satisfaction of...

... Features and Benefits: High Strength: The 20-gauge sheet steel provides excellent load capacity and stability. Corrosion resistance: Often provided with a protective coating, the sheets are resistant to rust and other signs of corrosion. Weather Resistance: Corrugated structure improves water drainage and increases structural integrity. Versatility: Suitable for roofs, facades and other structural applications in various building types Easy installation: privacy screen corten steel...

... against fat and oil floating on the surface. Fluid::for liquids Other characteristics::in-line Applications::for partially-filled pipes Process temperature:0...+60°C / +32...+140°F Measurement range:-12...+12 m/s / -40...+40 ft/s Nominal diameter:DN200...1600 / 8...64"...

... maintenance to prevent fouling and scaling. Our thermally conductive and corrosion-resistant plastic pipes offer an environmentally friendly and cost-effective solution. They are characterized by a significant reduction in fouling and scaling, ensuring a cleaner and more hygienic process.

... undergo electropolishing as a final processing step – makes them stronger and more resistant to acids than untreated stainless steel components. Therefore, they are particularly insensitive to cleaning with aggressive cleaning agents or hot water from high-pressure cleaners, making them ideal for use in packaging machines or in feeding technology in chemical industry installations.

... 29001. The good flow properties and large range of products characterise this system. Plastic pipes, aluminium pipes, air distributor sockets, pipe clamps, water separators, loosening assists, brass connectors, protective caps and retaining rings are included in the »speedfit« series.

...The "warning signs for street installations" made of plastic, standardized according to DIN 4065, 4067, and 4068, also known as fixture signs or valve signs, serve as the "guides" through the underground network of pipes and lines, e.g., for water (blue), wastewater (green), gas/natural gas (yellow), district heating (orange), and hydrants (red-white). The fire department can also quickly locate...

...The stainless steel probe LMK 387H was developed for level and gauge measurement in wastewater, sludge or water courses. The mechanical robustness of the flush ceramic diaphragm facilitates an easy disassembly and cleaning of the probe in case of service. The outer diameter is only 22 mm, whereby the installation or retrofitting can be easily carried out in 1 "pipes or in confined installation...

... gradient. Drainage with larger pumping heads and longer pressure pipes As an intermediate pumping station within a pressure drainage system Residential and industrial areas Towns Communities Infrastructure facilities such as airports, industrial parks, underground stations etc. Product features The tank with two separator systems Four centrifugal pumps ST (M)65/80, motors according to type and...

...The requirements for reliable filter technology are extremely diverse. KOPP is responding to this with a comprehensive range of reliable filter devices. Special designs are also possible. Filter devices Wide range of products for every need Drinking water is supplied by the waterworks clean and without contamination. However, on its way through the extensive network of pipes, water can pick up...

...EnviroFALK water softening systems provide an effective solution for hard water, preventing limescale deposits, clogged pipes, and complete pipe blockages. In many industrial production processes, hard water can lead to problems. Without a water softening system, limescale deposits can occur, resulting in clogged pipes and even complete pipe blockages. EnviroFALK water softening systems are...

...The most well-known copper alloys are brass (copper-zinc), bronze (copper-tin), copper-nickel, and nickel silver (copper-nickel-zinc). Copper and copper alloys form a central foundation of modern life. They provide us with electricity and clean water, and they make a significant contribution to sustainable development. For centuries, copper has been intertwined with the history of human progress. Its important functions are evident in our homes, in transportation, in industry – essentially throughout the entire infrastructure.

... hot gas automatic defrost, which guarantees efficient dry keeping without breaks for defrosting at certain intervals in which dehumidification pauses. Via the external outlet of the DH 105 S condensate can be drained across stories, because the standard condensate pump is designed for a discharge head of four metres. The DH 105 S is fitted with modularly refined electrical equipment and pipes containing water according to European standard – all manually finished and quality-controlled at Trotec in Germany. Portability:mobile Product:air...

...The Box Cooler is a water cooling system for ships. It consists of a U-shaped pipe set mounted in the ship's bilge, saving space in the engine room. The bilge is equipped with inlet and outlet grates. Cooling seawater enters through the inlet grate and flows along the U-shaped pipe set to the outlet grate, thereby cooling the water inside the pipes. The cooling effect is achieved through forced circulation of seawater when the ship is moving, or by natural convection while it is stationary.

...Short description: Layflat potable water hose in polyurethane Layflat potable water hose approved to BS and NSF. The circular woven polyester yarn reinforcement is totally embedded in the PU compound, therefore it is excellent protected against mechanical damage and microbiological attack. Furthermore PU potable water hose is lightweight and easy to handle compared to PE or steel pipes...

... the accumulation of DK-DOX® AGRAR itself or by-products in food derived from animals. - Disinfection of drinking water - Stand disinfection of water distribution systems - Air disinfection - Spray disinfection on walls and floors - Disinfection of liquid feeding systems - Disinfection of pipes and water distribution systems according to DVGW Worksheet W291...

...Concrete drainage pipes with porosity/drainage absorb and channel water, preventing construction damage and maintaining soil structure stability. Pipe diameters of up to 1,000 mm provide high drainage performance over short distances. With low cover and high traffic loads, the pressure load is safely managed.

...Drinking water Drinking water installations Water distribution systems, pipes, or containers Water tanks in boats and caravans Filters Draft systems and much more. Application according to DVGW worksheets W291, W224, and W557.

...PEOC Plus pipes are particularly suitable for sanitary applications (hot/cold water). As an oxygen-tight pipe, PEOC Plus is used in radiator connections, underfloor heating, and special applications with increased temperature and pressure requirements.

...Everything else related to channel technology, whether it's handheld lamps, fog simulators, vacuum pumps, manhole lifting devices, accessories for water retention (standpipes, flat hoses, system separators), etc. Leak detection devices, sewer cleaning spirals, tightness testing devices, pipeline shut-off devices, sewer cleaning spirals.

... various high-quality materials with different compositions and coatings, the performance characteristics regarding mechanical strength, oil and chemical resistance, weather resistance, water and gas tightness, as well as the temperature resistance of the insulation can be specifically influenced and individually optimized. Insulation systems can be realized for application temperatures up to 1200°C. We would be happy to provide you with personal advice on this matter.