threaded flanges Germany

...Universal tank caps and threaded flanges.

... Stainless steel flanges come in several types to suit different applications: Weld Neck Flanges: Designed to be welded to the pipe. Suitable for high-pressure applications. Slip-On Flanges: Easily slide over the pipe and are welded in place. Socket Weld Flanges: Used for smaller, high-pressure piping. Threaded Flanges: Attached without welding, ideal for low-pressure applications or pipes with a thin wall. Blind Flanges: Used to seal the end of piping systems or pressure vessel openings. Lap Joint Flanges: Used with stub end fittings for applications requiring frequent dismantling.

...We offer you blind flanges, loose flanges, threaded flanges, and other types of flanges.

...We supply flanges both as custom-made products according to your drawing and as standard products. Our range of standard flanges includes: • Blind flanges ND 6 - 100 DIN 2527 • Oval threaded flanges, smooth ND 6 DIN 2558 • Oval threaded flanges with collar ND 10 / 16 DIN 2561 • Threaded flanges with collar ND 10 / 16 DIN 2566 • Flanges, smooth ND 6 DIN 2573 • Flanges, smooth ND 10 DIN 2576...

...Pre-weld flanges, threaded flanges, blind flanges, smooth flanges, loose flanges, flared and collars e.g. Pre-weld flange type 11 according to DIN EN 1092-1 - Material No. 1.4541 / 1.4571 / 1.4301 / 1.4307 / steel - additional special materials and dimensions available upon request...

...Blind Flanges DIN 2527 PN 16 We offer flanges as a supplementary range to ductile iron and steel fittings as commercial goods. The pre-welded and blind flanges are available in black 03_Execution. Threaded flanges are offered in black or galvanized. 04_Article Number: B16125 02_Nominal Diameter DN: 125 05_Thread: External Thread: R (tapered) 01_Catalog Number: Flanges 08_DIN Standard: DIN-EN 1092-1 10_Weight in grams: 8420...

...This high-precision torque sensor is designed for both static and dynamic measurements on non-rotating parts. The 10mm diameter throughhole can be used to feed parts such as cables or Bowden cables through the sensor. The mounting flanges contain threaded holes and through-holes so that the sensor can be fitted at either end. With no rotating parts, this sensor needs no maintenance when used...

...Lubrication of highly stressed sliding surfaces, especially at low slip speeds or with oscillating movements, for example with screwed, mating or bayonet connections made of high-alloy steel or non-ferrous metals Surface separation of temperature-stressed threaded connections, for example at combustion engines and turbines Corrosion protection at screws, pins, bolts, flanges, spindles and fits...

... threaded shoulder on the piston rod. There are connections for high pressure flanges to SAE 6.000 P.S.I as well as vent holes for a free installation position. With the exception of the piston rod and SAE flange surfaces, all surfaces are protected against corrosion with a black primer. On request alternative surface treatments are possible. The surface of the piston rod is hard chromed, ground...

...Upon request, Marburger Flanges can be supplied with threaded holes, blind holes, or countersunk screw holes. Our high-performance machining centers and radial drilling machines enable us to drill bolt circles with a diameter of up to 2,200 mm with varying numbers of holes.

...We are particularly strong in the area of small bushings. With a production capacity of up to 400 pieces per minute, we manufacture small bushings with and without flanges on our dedicated bushing machine. Special contours can also be easily integrated. With subsequent surface treatments such as washing and vibratory finishing (in-house), as well as various coatings from our partners and 100% quality control, we deliver your bushings as a complete package.

...Blind flanges, threaded flanges, smooth flanges, pre-weld flanges, loose flanges. Available in black C22.8 or RSt37. In stainless steel 1.4541 and 1.4571. In 1.4571, blind, loose, and smooth flanges are also available with reduced plate thickness. Loose flanges are also available in aluminum or pressed from 1.4301 sheet metal. Additionally, we naturally have matching screws, nuts, washers, and seals in stock.

...A wide range of mounting rails is available for securing safety switch strips to gates or machines and installations. Depending on the application and profile types, the mounting rails can be supplied in steel or aluminum. Different designs, such as with and without flanges, offer various mounting options. At the customer's request, Gelbau also provides the option to deliver the C-rails drilled or with pressed-in threaded bolts or nuts.

...Special pressure resistance, high temperature tolerance, well protected against external influences. Hose materials: Corrugated hose: 1.4404, 1.4541, 1.4571 Braiding: 1.4301 Available nominal diameters and pressure ratings: Nominal diameters: DN 6 – 250 Pressure ratings: PN 10 – 220 Connection types: Flanges (rotatable flanges or fixed flanges) Threaded connections Quick couplings Combined connections Special connections...

... steel precision casting). The material contains at least 2.3% molybdenum and has a lower carbon content than the conventional material 1.4401. This makes it not only equivalent to this stainless steel but also impresses with its significantly higher corrosion resistance. High-pressure flange seal free of asbestos, suitable for pre-welded, threaded, press, and loose flanges up to a maximum of 400 °C...

... cladding • Threaded sockets DIN 11851 made of solid C22 • Legs with forklift pockets made of 1.4301 Surface Treatment: • Weld seams inside ground flush • Inner surfaces ground to grain 240 (Ra < 0.8 μ) • Inner and outer surfaces pickled and passivated Operating Data: • The vessel is designed for a maximum operating pressure of -0.05 (0.95 bar abs.) to +6 bar at -10/110 ℃. • Acceptance according to DGRL, Cat. IV, Module G...

...for the food industry, cosmetics, and pharmaceuticals in the standards DIN in nominal sizes DN 25, DN32, DN40, DN50, DN65, DN80, DN100, DN125, DN150, DN200 (only as intermediate flange) in materials 1.4301 / 1.4307 / 1.4404 Design: Air/Spring or Air/Air Connections with welded and threaded flanges Seals: Silicone, EPDM, Viton...

...Comprehensive range of standard and special materials: flanges, threaded fittings, welded fittings, and caps Special materials: 1.4547 | 254 SMO 1.4550 | AISI 347 1.4539 | AISI 904L 1.4435 | AISI 316L 1.4835 | 253 MA 1.4003 | UNS S 41003 1.4903 | SA387 Cl. 2 Gr. 91 1.4313 | UNS S 41500 1.4948 | AISI 304H 1.4006 | AISI 410 [...] Standard materials: 1.4301 | AISI 304 1.4571 | AISI 316Ti 1.4404 | AISI 316L 1.4541 | AISI 321 1.4462 | AISI 318LN 1.4828 | AISI 309 1.4841 | AISI 310 [...]...

...Pipe and thread sealant for large threaded parts and flanges Hand strength at room temperature: 40 - 60 min Final strength at room temperature: 6 - 12 hours Temperature resistance: -60 to +150 °C Size: 50 ml...

...Connection technology, assembly Mounting with press fit of pipe connections and threaded nipples as preparation for brazing in continuous furnaces, screw connections, cutting rings, distributor pieces, valves, and other fittings. Welding of SAE flanges and welded nipples, assembly of components from machine construction profiles such as conveyor systems, protective cabins, etc.

...The Tri-Clamp 3C fitting is easy to handle: the two connections, resembling flanges, are pressed against each other and assembled with a stainless steel clamp. A gasket between the two connections ensures a perfect seal. This creates a smooth mechanical joint that can be easily and quickly opened or closed using the clamp's wing nut. The Tri-Clamp fitting can be combined with a 1+, 1A, or 1C fitting, a rigid tube fitting 2N, or a threaded connection. Pressure: PN06...

...All threaded bolts for short-term ignition can be produced in intermediate lengths and modified length tolerances according to customer specifications based on drawings or sketches. The flanges can be represented from mini flanges to custom sizes. The thread tolerance position can also be changed to "6e", "6f", or "6h".

... parts and small series with a dimensional accuracy of 0.1 mm.":"","Machining of weld bevels according to DIN 2559 / EN ISO 9692-2 / ASME B16.25":"","Grinding larger dimensions up to 16“":"","Axial turning – for example, springs / grooves":"","Cutting of pipe bends at any angle – from ½“ to 24“":"","MANUFACTURING":"","Surface treatment for flanges – Rz, Rth 0.5 – 160":"","Turning of connection dimensions (S) – from ½“ to 24“":"","Internal turning":""}...

...With uncompromising precision, we manufacture individual parts, prototypes, series, and assemblies. At the same time, we offer you the highest quality at competitive prices. We produce our workpieces in small, medium, and large batch sizes using state-of-the-art machines. Our experience spans all workpieces used in modern machine engineering. These include, to name just a few: bolts, sleeves, bushings, ejectors, discs, axle bolts, drive shafts, covers, nozzles, clamping sleeves, flanges, roller bolts, clamp halves, threaded plates, adjusting screws, wheel bolts, and spring pins.

... BS 5200) GP-LK...-AG...#K ▪ Working Pressure 250 bar ▪ Ø LK: 30 mm ... 56 mm ▪ Materials: S355J0 or equivalent ▪ Surfaces: CrVI-free 4-hole Screw-in BSPP Threaded Flange GP-LK...-G...#K ▪ Working Pressure: 250 bar ▪ Ø LK: 30 mm ... 56 mm ▪ Materials: S355J0 or equivalent ▪ Surfaces: CrVI-free...

...Manufacturing of pre-weld flanges, blind flanges, loose flanges, smooth flanges, threaded flanges, smooth ends, welding flanges, slip-on flanges, pipe bends, T-pieces, and reducers. Pipe Connection Technology Our company specializes in the production of pre-weld flanges, blind flanges, loose flanges, smooth flanges, threaded flanges, smooth ends, welding flanges, slip-on flanges, pipe bends, T-pieces, reducers, and caps made from stainless steel. Our main markets are gas, petrochemicals, and shipbuilding.

...We provide everything necessary for the construction of complex piping systems: pipe bends, fittings, flanges, valves, steel & ductile iron fittings for welding, pressing, or threaded connections. Pipe Accessories Geberit Mapress...

...We offer everything necessary for the construction of complex piping systems: pipe bends, fittings, flanges, valves, steel & ductile iron fittings for welding, pressing, or threaded connections. Pipe Accessories Geberit Mapress...

...We provide everything necessary for the construction of complex piping systems: pipe bends, fittings, flanges, valves, steel & ductile iron fittings for welding, pressing, or threaded connections. Pipe Accessories Geberit Mapress...

...We provide everything necessary for the construction of complex piping systems: pipe bends, fittings, flanges, valves, steel & ductile iron fittings for welding, pressing, or threaded connections. Pipe Accessories Geberit Mapress...